Abstract:Light-frame buildings commonly employ shear wall realized by framing and sheathing panels made of wood materials. Recently, much research has focused on the use of engineered bamboo composites to substitute wood in light-frame buildings. The aim of this study is to investigate the thermal insulation performances of bamboo- and wood-based shear walls in light-frame buildings. First, an archetype wall with characteristics similar to those commonly employed in wood shear walls was defined. Starting from the archetype wall, four specific configurations representing one classical full wood-based configuration, one hybrid bamboo-wood-based configuration and two full bamboo-based configurations with different studs thickness were identified to be tested. The thermal conductivity of the materials composing the wall was measured using a hot plate apparatus varying the temperature in the range of 10-50 degrees C. The anisotropy of the thermal conductivity was analyzed for the wood and bamboo materials. The four specific configurations of the archetype wall were tested in a guarded hot box apparatus in order to determine the thermal resistance and transmittance. The experimental results were compared with the estimates obtained using the ISO 6946 procedure and a Finite Element (FE) model of the wall, both adopting the thermal conductivity previously measured. A good agreement between the experiments and the models was found with the better results obtained with the FE model. Finally, the so-validated FE model was used to optimize the archetype wall with only bamboo-based materials to the Chinese thermal regions, showing the possibility of real application in the practice. All the results indicate that the thermal insulation performances of engineered bamboo composites are slightly lower compared with wood ones, both at the material and the shear wall levels. This indicates that there is the possibility of using bamboo-based shear walls in light-frame buildings ensuring thermal insulation performances similar to classical wood-based one. (C) 2018 Elsevier B.V. All rights reserved.

The Impact of Temperature Variations on the Thermal and Charring Characteristics of Laminated Bamboo Lumber

Fire Simulation Test and Analysis of Laminated Bamboo Frame Building

Flammability Assessment Of Glubam With Cone-Calorimeter Tests

Charring Properties and Temperature Profiles of Laminated Bamboo under Single Side of ISO 834 Fire Exposure

Mechanical Properties of Aged Glue Laminated Bamboo for Structural Members

Experimental research on fire safety of lightweight bamboo frame buildings

EXPERIMENTAL RESEARCH ON FIRE-RESISTANT PERFORMANCE OF GLUBAM STRUCTURAL WALL

Experimental Study on Thermal Performance of Bamboo Scrimber at Elevated Temperatures

Thermal Performance of Cross-Laminated Timber (CLT) and Cross-Laminated Bamboo and Timber (CLBT) Panels

The Effect of Elevated Temperatures on the Mechanical Properties of Laminated Bamboo

Mechanical Behavior of Glubam Engineered Bamboo at Low Temperature

Thermal Insulation Performance of Bamboo- and Wood-Based Shear Walls in Light-Frame Buildings

Experimental Research on Moisture Transfer, Burning and Charring Behavior of Glue Laminated Larch Under Fire Heating Using Cone Calorimeter

Fire resistance evaluation of laminated bamboo lumber column under eccentric compression

Effect of elevated temperature on physical and mechanical properties of engineered bamboo composites

Experimental Study on Combustion Characteristics of Engineered Bamboo Considering Smoldering and Self-Extinction

The charring rate and charring depth of bamboo scrimber exposed to a standard fire

Thermal Responses of Woods Exposed to High Temperatures Considering Apparent Thermo-Physical Properties

Experimental study on the combustion properties of four common engineered bamboo and wood composites

Temperature Influence on the Bending Performance of Laminated Bamboo Lumber

Flexural behavior of larch wood under fire condition