Abstract:Hot drawing properties of UHMWPE/HDPE blends. The extremely low melt flowability of ultra‐high molecular weight polyethylene (UHMWPE) is the primary obstacle to its melt processing. Particularly in melt spinning processes, the extremely high molecular weight of UHMWPE and the density of entangled molecular chains severely limit its production efficiency and monofilament performance. This study investigates the effect of flow modifiers on the melt spinning process of UHMWPE/HDPE blends, focusing on CaSt2, PEG, and CaSt2/silicone powder composite additives, and their impact on the standard tensile samples and monofilament tensile properties of UHMWPE/HDPE. The mechanism of additive influence on the tensile properties of UHMWPE/HDPE blends is analyzed through tensile strength testing, thermal analysis, and microscopic morphology observation. The results show that in standard tensile samples, CaSt2 or CaSt2/silicone powder composite additives can enhance the crystallinity of the blend, thereby improving its tensile strength. Conversely, adding PEG significantly reduces the crystallinity and tensile strength of the blend. The maximum tensile strength of CaSt2‐modified UHMWPE/HDPE monofilament is 1236.61 MPa. This enhancement is attributed to the lubricating effect of CaSt2, which simultaneously assists the molecular chains in the amorphous region, and the reorientation of the stress‐induced molten lamellar structure under tension, greatly promoting the formation of straight‐chain crystals in the monofilament. During hot drawing, PEG inhibits the formation of straight‐chain crystals in the monofilament, resulting in a 3.06% decrease in maximum crystallinity compared with standard tensile samples. When CaSt2 is combined with silicone powder, the additives tend to aggregate during hot drawing, and these larger aggregate particles hinder the orientation of molecular chains along the drawing direction, resulting in a 30.75% decrease in maximum tensile strength of the monofilament compared with the standard tensile samples. Highlights The tensile property of UHMWPE/HDPE blends modified with additives was discussed. Analytical techniques including DSC, SEM, and tensile strength tests were used. The maximum tensile strength of the monofilament can reach up to 1236.61 MPa. UHMWPE/HDPE/CaSt2 = 60/40/0.5 exhibits the best tensile property.

Study on the synergistic effect of additives on the processing performance of UHMWPE/HDPE blends

Enhanced melt flow UHMWPE/HDPE blends melt spinning and performance study

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Rheological and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene/high Density Polyethylene/polyethylene Glycol Blends

Effect of Calcium Stearate and a Fluoroelastomer on the Flowability of UHMWPE/HDPE Composites and the Underlying Mechanism

Effects of Maleic Anhydride Grafted Polyethylene on Rheological, Thermal, and Mechanical Properties of Ultra High Molecular Weight Polyethylene/Poly(Ethylene Glycol) Blends

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Effect of PEW and CS on the Thermal, Mechanical, and Shape Memory Properties of UHMWPE

Ultra-high molecular weight polyethylene (UHMWPE)/high-density polyethylene (HDPE) blends with outstanding mechanical properties, wear resistance, and processability

Preparation of HDPE/UHMWPE/MMWPE Blends by Two-Step Processing Way and Properties of Blown Films

Morphology evolution and mechanical property enhancement of linear low‐density polyethylene by adding disentangled ultrahigh molecular weight polyethylene

Effects of Addition of Ultra-High Molecular Weight Polyethylene on Tie-Molecule and Crystallization Behavior of Unimodal Pe-100 Pipe Materials

Dynamic Rheological Behavior of Hdpe/Uhmwpe Blends

Elongational Flow Field Processed Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends with Distinct Interlayer Phase for Enhanced Tribological Properties

Effect of Functionalized Polyethylene Wax on the Melt Processing and Properties of Highly Filled Magnesium Hydroxide/Linear Low-Density Polyethylene Composites

Effects of Stearic Acid on the Tensile Properties of Ultrahigh Molecular Weight Polyethylene Fibers

Study on fluidity and mechanics performance of UHMWPE/HDPE composite material

Melt Processing and Structural Manipulation of Highly Linear Disentangled Ultrahigh Molecular Weight Polyethylene

Enhancing Chain Mobility of Ultrahigh Molecular Weight Polyethylene by Regulating Residence Time under a Consecutive Elongational Flow for Improved Processability

Increasing the Resistance of HDPE to Abrasive Wear with Small Additions of UHMWPE

Influence of sequential melting and sintering process on morphology development and performance properties of ultra‐high molecular weight polyethylene/low‐density polyethylene blends