Abstract:Split Hopkinson pressure bar (SHPB) is a widely used experimental technique for testing materials at a high strain-rate. SHPB testing of fiber-reinforced polymer (FRP) composite samples have become common in recent decades. Specimen geometry is one of the essential parameters that can ease sample fabrication and help in-situ analysis when altered as per convenience. Further, developing a computationally accurate model would reduce the need for multiple experimental iterations, thus saving cost and time. As part of the current study, high strain-rate tests using a compressive SHPB setup were conducted on glass/epoxy (GE) laminated composite samples of both square prismatic and cylindrical shape along the through-thickness direction experimentally. Negligible differences were observed due to the change in specimen geometry. Further, we know that the woven fabric consists of yarns, which are a bundle of fibers. The strain-rate dependency of the epoxy's material property is well known, but very limited information is available about the strain-rate dependency of yarn's properties. The effect of strain-rate dependency of the yarn was analysed numerically on Abaqus software using a square prismatic shaped yarn-level finite element composite model. The homogenised properties of the yarn were taken to be reflective of a high fiber volume fraction composite. The bulk epoxy's and yarn's material property were defined using the Johnson-Cook (JC) constitutive model, and the failure mechanism was defined using the JC damage model. One of the primary reasons for using this model is its availability and ease of implementation in almost every finite element analysis (FEA) simulation software. Three cases were analysed numerically, first keeping both yarn and bulk matrix property strain-rate dependent, second keeping the strain-rate dependency only in the bulk matrix, and in third case both yarn and matrix were kept strain-rate independent. It was observed that completely strain-rate dependent model showed comparable peak stress and strain values with the experimental result than other models.

Research on the Reasonable Sample Dimension of Woven Composites in Split Hopkinson Pressure Bar Testing

Experimental Investigations on the In-Plane Dynamic Compressive Behavior and Upper Limit of Constant Strain Rate for 2D Twill Weave Carbon Fiber Reinforced Composite

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Analysis on the Turning Point of Dynamic In-Plane Compressive Strength for a Plain Weave Composite

Research on the upper limit of constant strain rates and dynamic fracture behavior for hybrid woven composite

Split Hopkinson pressure bar testing of 3D multi-axial warp knitted carbon/epoxy composites

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates

Dynamic properties and strain rate effect of 3D angle-interlock carbon/epoxy woven composites

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Experimental Study Of In-Plane Mechanical Performance Of Carbon/Glass Hybrid Woven Composite At Different Strain Rates

Finite element modelling and experimentation of plain weave glass/epoxy composites under high strain-rate compression loading for estimation of Johnson-Cook model parameters

Challenges related to testing of composite materials at high strain rates using the split Hopkinson bar technique

Dynamic Behavior of A Woven Glass-Fiber-Reinforced Polymer Composite at High Strain Rates and Its Dynamic Constitutive Relationship

Dynamic response and damage mechanisms of 2D plain weave hybrid composites under the out-of-plane punch shear loading

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

The Out-of-Plane Compression Behavior of Cross-Ply AS4/PEEK Thermoplastic Composite Laminates at High Strain Rates.

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

A Method for Plotting Failure Envelopes of Unidirectional Polymer Composite Materials under Different Strain Rates

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite