Abstract:Al-Si alloys have been widely used in electronic information, communication and other fields because of their high specific strength, excellent castability and good thermal conductivity. In recent years, with the rapid development of 5G communication technology, electronic communication equipment is gradually developing towards high integration and lightweight. The power of related equipment is higher and higher, which puts forward higher requirements for thermal conductivity and mechanical properties of materials. Si can improve the fluidity and strength of the Al-Si alloy, but a large amount of Si will aggravate the lattice distortion and promote the increase of eutectic Si. This will reduce the plasticity of the alloy, increase the electron scattering and reduce the thermal conductivity. In order to improve the mechanical properties and thermal conductivity of Al-Si alloys, chemical inoculation is generally used. Sr is usually used as modifier and Al-B is as grain refiner. However, the simultaneous addition of Sr and B in Al-Si alloy results in "poisoning" phenomenon, it is impossible to refine α- Al grains and modified eutectic Si simultaneously. In recent years, rare earth La has attracted more and more attention in improving the properties of aluminum alloys. However, previous studies have mainly focused on the effects of La addition, the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy is lack. In this work, solidification experiments were performed to investigate the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy. The results show that the addition of trace rare earth La can effectively eliminate the poisoning effect of Sr and B, and enhance the modification effect of eutectic Si. Besides, La addition can promote the formation of α-Al heterogeneous nucleation substrate LaB6 and La can be used as a surfactant to reduce the undercooling of α-Al nucleation, thus it refines α-Al grains. The thermal conductivity of the alloy is significantly improved when the addition of La ranges from 0.02% to 0.06%, with the further increase of La addition, LaAlSi intermetallic compounds are formed in the alloy, leading to a decrease in the thermal conductivity of the alloy.

Impacts of Rare Earth Element La on Properties and Microstructure of AlMgSi Alloys

Effect of La on the Microstructures and Mechanical Properties of Al-5.4Cu-0.7Mg-0.6Ag Alloys

Effects of La addition on the mechanical properties and thermal-resistant properties of Al–Mg–Si–Zr alloys based on AA 6201

Effect of trace rare earth La on microstructure and properties of Al-7Si-0.6 Fe alloy

Effects of La Addition on the Microstructure, Thermal Conductivity and Mechanical Properties of Mg-3Al-0.3Mn Alloys

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

Effects of rare earth elements on microstructure and tensile properties of Al-Si-Cu alloy at 250 °C

Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloys

Synergistic Effects of La and Y on the Microstructure and Mechanical Properties of Cast Al-Si-Cu Alloys

Effect of Cooling Rates on the Microstructure and Mechanical Property of La Modified Al7SiMg Alloys Processed by Gravity Die Casting and Semi-Solid Die Casting

Effects of La Addition on Microstructure Evolution and Thermal Stability of Cu-2.35Ni-0.59Si Sheet

Effect of La content on mechanical properties and electromagnetic interference shielding effectiveness of Mg-Zn-Y-La-Zr alloy

Effect of La Addition on Microstructure, Mechanical Behavior, Strengthening and Toughening Mechanisms of Cast Mg-Gd-Zn Alloy

Influence of La additions on solidification and microstructure in the as-cast state of the aluminium alloy EN AW-7175

Effect of minor lanthanum on the microstructures, tensile and electrical properties of Al-Fe alloys

Effect of La on microstructure and properties of AZ61 magnesium alloy

Effects of La on microstructure and mechanical properties of NbMoTiVSi0.2 refractory high entropy alloys

The investigation on microstructure evolution and mechanical behavior of extruded Mg-1.5Al-xLa-Mn (x=0.5, 1, 2wt%) alloys

Enhancement of the Corrosion Properties of Al–10%Si–2%Cu Alloys with La Addition

Effect Of La, Zr Micro-Alloying On The Microstructure And Mechanical Properties Of Al-5mg-0.2ti Alloy

Impact of Aging Time on the Morphological, Mechanical, and Tribological Behavior of Al-6.6Si-0.2Mg-0.2La Hypoeutectic Alloy