Regenerable Chitosan-Embedded Magnetic Iron Oxide Beads for Nitrate Removal from Industrial Wastewater

Muntaha Nasir,Farhan Javaid,M. Talha Masood,Muhammad Arshad,Muhammad Yasir,Vladimir Sedlarik,Muhammad Abdel Qadir,Hazim Qiblawey,Wenjuan Zhang,Kashif Mairaj Deen,Edouard Asselin,Nasir M. Ahmad

DOI: https://doi.org/10.1039/d3va00351e

2024-01-01

Abstract:Synthesis of regenerable chitosan-embedded magnetic iron oxide beads.

What problem does this paper attempt to address?

Chitosan-based beads as sustainable adsorbents for wastewater remediation: a review

Akash Balakrishnan,Sowmya Appunni,Mahendra Chinthala,Meenu Mariam Jacob,Dai-Viet N. Vo,Soreddy Sainath Reddy,Emmanuel Sebastian Kunnel

DOI: https://doi.org/10.1007/s10311-023-01563-9

IF: 13.615

2023-02-16

Environmental Chemistry Letters

Abstract:Water contamination is increasing worldwide, yet actual methods of water and wastewater treatment are limited, in particular by actual fossil-fuel derived nano-adsorbents that are difficult to regenerate. This calls for advanced methods that use sustainable materials such as chitosan. Chitosan is a biopolymer extracted from the outer skeleton of shellfish, including crab, lobster, and shrimp. Chitosan is non-toxic, abundant, and chemical and physical stable. Moreover, chitosan can be shaped into beads, sheets, membranes, and composites. Here, we review chitosan-based beads for wastewater treatment with focus on adsorption mechanisms, removal of pollutants, functionalization, metal organic frameworks, magnetic beads, imprinted and co-polymeric beads, and regeneration. We found that chitosan/Fe-hydroxyapatite beads exhibit an adsorption capacity of 1385 mg/g for the removal of lead. Imprinted magnetic chitosan beads display a reusability of 15 cycles for nickel removal.

environmental sciences,engineering, environmental,chemistry, multidisciplinary
In-situ magnetic alginate coated chitosan core@shell beads with excellent performance in simulated and real wastewater treatment: Behavior, mechanisms, and new perspectives

Soulaima Chkirida,Najib El Mernissi,Nadia Zari,Abou el kacem Qaiss,Rachid Bouhfid

DOI: https://doi.org/10.1016/j.ijbiomac.2024.129389

IF: 8.2

2024-01-28

International Journal of Biological Macromolecules

Abstract:Herein, a new hybrid magnetic core@shell biocomposite was prepared based on an alginate-bentonite core and a chitosan shell layer (mAB@Cs) where magnetic Fe 3 O 4 NPs (50.7 nm) were in-situ generated on the surface via a simple non-thermal co-precipitation approach. The biocomposite has a high ability to magnetically separate and remove organic (ciprofloxacin (CPX)) and seven toxic inorganic (Cu 2+ , Cd 2+ , Co 2+ , Ni 2+ , Pb 2+ , Zn 2+ , and Hg 2+ ) contaminants from simulated wastewater. Experimental results showed a CPX monolayer chemisorption with a Langmuir maximum adsorption capacity of 264.7 mg/g, maintained effectiveness up to the fifth cycle, and high removal rates of heavy metals ranging from 74.89 % to 99.86 % corresponding to adsorption capacities ranging from 12 to 20 mg/g. For a more accurate evaluation, the biocomposite was tested on a real urban wastewater sample (RWW) and it has manifested a noteworthy efficiency in removing a mixture of inorganic pollutants in terms of potassium K + and orthophosphate phosphorous P-PO 4 3− , and organic matter in terms of biological oxygen demand (BOD) and chemical oxygen demand (COD) with 46 %, 90 %, 84 %, and 64 % removal efficiencies, respectively. On top of this, a high inactivation rate of E. coli of the order of 96 % was recorded, making the prepared magnetic biocomposite adept for the simultaneous removal of emergent wastewater pollutants, from organic, inorganic, to pathogen microorganisms.

polymer science,biochemistry & molecular biology,chemistry, applied
Functionally graded chitosan ferrite beads for photocatalytic degradation of Eriochrome Black T and Congo red dyes

Qinghong You,Farman Ali,Sahid Mehmood,Waqar Ahmad,Amir Said,Umar Arif,Sedra tul Muntha,Nisar Ali,Fazal Haq

DOI: https://doi.org/10.1007/s13399-024-06094-z

IF: 4.05

2024-09-14

Biomass Conversion and Biorefinery

Abstract:Recently, semiconductor materials have attracted significant interest due to its remarkable catalytic activity. Heterogeneous catalysts play a crucial role in degrading organic dyes and their hazardous by-product, which threaten both aquatic and terrestrial ecosystems when released into wastewater. In this study, we follow the co-precipitation technique to synthesize cobalt-ferrite (CoFe 2 O 4 ) and nickel-ferrite (NiFe 2 O 4 ). Subsequently, produce five distinctive nanocomposite beads, decorated with chitosan: Chi-CoFe 2 O 4 − I, Chi-CoFe 2 O 4 − II, Chi-NiFe 2 O 4 − I, and Chi-NiFe 2 O 4 − II, all within an acidic aqueous environment. Different characterization was performed specially the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR) analysis, to check the morphology of the synthesized beads. Most importantly, the synthesized novel beads were then utilized for the photo-degradation of Organic dyes, mostly used in industries, i.e., Eriochrome black T (EBT), and Congo red (CR). The remarkable results revealed a staggering 93% degradation of EBT dye after just 120 min under visible light exposure. Simultaneously, CR dye shows an impressive 93% degradation just within 120 min, through Chi-NiFe 2 O 4 − II. While, the TOF were 1257.5 kg −1 s −1 , 1287 kg −1 s −1 , 1318.18 kg −1 s −1 , 1363 kg −1 s −1 , and 1393 kg −1 s −1 . Furthermore, the turnover numbers were 2.26 × 10^7 kg −1 s −1 , 2.3 × 10^7 kg −1 s −1 , 2.37 × 10^7 kg −1 s −1 , 2.45 × 10^7 kg −1 s −1 , and 2.5 × 10^7 kg −1 s −1 for chitosan beads, Chi-CoFe 2 O 4 − I, Chi-CoFe 2 O 4 − II, Chi-NiFe 2 O 4 − I, and Chi-NiFe 2 O 4 − II respectively. This study shows the great potential of synthesized nanocomposite beads for degrading organic dyes from wastewater. This study will be a great addition to future environmental studies.

energy & fuels,engineering, chemical
Immobilization of In-Situ Formed Ni(OH)2 Nanoparticles in Chitosan Beads for Efficient Removal of U(VI) from Aqueous Solutions

Limin Zhou,Zhao Li,Kai Zeng,Quanshui Chen,Yun Wang,Zhirong Liu,Adesoji A. Adesina

DOI: https://doi.org/10.1007/s10967-017-5407-7

2017-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:Both metal hydroxides and chitosan have been recognized as effective scavengers for nuclide ions. However, the aggregation of metal hydroxides and the weak mechanical strength of chitosan beads greatly restricts their application. Herein, the in-situ formed Ni(OH)(2) nanoparticles was immobilized in chitosan matrix to obtain a novel hybrid sorbent (CSNi) for U(VI) adsorption. The CSNi showed high affinity for U(VI) sorption, with the inner-sphere complexation as the main mechanism. The maximum mono-layer adsorption capacity for U(VI) at 298 K reached 164.2 mg/g. The U(VI) sorption was endothermic and spontaneous, and kinetically followed the pseudo-second-order model. These findings highlight the possibility of using CSNi for efficient removal of U(VI) from wastewater.
Hybrid Beads of Zero Valent Iron Oxide Nanoparticles and Chitosan for Removal of Arsenic in Contaminated Water

Mian Fawaz Ahmed,Muhammad Asad Abbas,Azhar Mahmood,Nasir M. Ahmad,Hifza Rasheed,Muhammad Abdul Qadir,Asad Ullah Khan,Hazim Qiblawey,Shenmin Zhu,Rehan Sadiq,Niaz Ali Khan

DOI: https://doi.org/10.3390/w13202876

IF: 3.53

2021-10-14

Water

Abstract:Water contaminated with highly hazardous metals including arsenic (As) is one of the major challenges faced by mankind in the present day. To address this pressing issue, hybrid beads were synthesized with various concentrations of zero valent iron oxide nanoparticles, i.e., 20% (FeCh-20), 40% (FeCh-40) and 60% (FeCh-60) impregnated into a polymer of chitosan. These hybrid beads were employed as an adsorbent under the optimized conditions of pH and time to facilitate the efficient removal of hazardous arsenic by adsorption cum reduction processes. X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Brunauer- Emmett-Teller BET, a porosity test and wettability analysis were performed to characterize these hybrid beads. The porosity and contact angle of the prepared hybrid beads decreased with an increase in nanoparticle concentration. The effects of various adsorption factors such as adsorbent composition, contact period, pH value and the initial adsorbate concentration were also evaluated to study the performance of these beads for arsenic treatment in contaminated water. FeCh-20, FeCh-40 and FeCh-60 have demonstrated 63%, 81% and 70% removal of arsenic at optimized conditions of pH 7.4 in 10 h, respectively. Higher adsorption of arsenic by FeCh-40 is attributed to its optimal porosity, hydrophilicity and the presence of appropriate nanoparticle contents. The Langmuir adsorption kinetics described the pseudo second order. Thus, the novel beads of FeCh-40 developed in this work are a potent candidate for the treatment of polluted water contaminated with highly toxic arsenic metals.

environmental sciences,water resources
Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads for phosphate removal from water: Preparation, adsorption behavior and pH stability

Huiping Zeng,Siqi Sun,Ke Xu,Weihua Zhao,Ruixia Hao,Jie Zhang,Dong Li

DOI: https://doi.org/10.1016/j.reactfunctpolym.2022.105328

IF: 4.966

2022-08-01

Reactive and Functional Polymers

Abstract:Phosphate removal from water relies mainly on the effective adsorbent. Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads (M-IACBs) were prepared from waterworks iron sludge, magnetic nanoparticles, sodium alginate, and chitosan where magnetic nanoparticles were also synthesized from iron sludge. The interpenetrating network constructed by sodium alginate and chitosan improves the stability of the beads, while iron sludge acts as the main functional body for phosphate adsorption. M-IACBs with uniform size (~ 2 mm) and strong saturation magnetization intensity (~ 15.0 emu/g) maintain good stability in the pH range of 4–8. They have good selectivity for phosphate in the presence of competing ions. The phosphate adsorption by the beads followed the Langmuir model, indicating that the adsorption was dominated by monolayer adsorption, and the fitting yielded a maximum phosphate adsorption capacity of 18.5 mg/g. The pseudo-second-order model better agrees with the experimental data. The adsorption properties of iron sludge and beads were compared. Granulation was found to enhance the availability of the adsorbent but slow down the adsorption kinetics. The adsorption mechanisms of phosphate are ligand exchange and electrostatic attraction. This study provides a reference pathway for phosphate removal and resource utilization of iron sludge in waterworks.

engineering, chemical,chemistry, applied,polymer science
Biosorptive removal of cobalt(II) from aqueous solutions using magnetic cyanoethyl chitosan beads

Qian Zhang,Shuting Zhuang,Jianlong Wang

DOI: https://doi.org/10.1016/j.jece.2020.104531

IF: 7.7

2020-12-01

Journal of Environmental Chemical Engineering

Abstract:Biosorption is a cleaner technology for the treatment of heavy metal-containing wastewater. In this study, a cleaner method was proposed for preparing a novel biosorbent, magnetic cyanoethyl chitosan beads, which was characterized by FT-IR, SEM-EDS, XRD, TGA, BET, and vibrating sample magnetometer, and applied for removing Co2+ from aqueous solutions. The influencing factors, such as contact time (0−120 min), pH (5–8), and initial concentration of cobalt ions (10−600 mg L−1), were examined. The first-order, second-order, intraparticle diffusion, and Elovich models were used to simulate the kinetics of the cobalt adsorption process. The experimental data of isotherms were analyzed by the Langmuir, Freundlich, and Temkin models. Among them, the second-order model and Langmuir model were the best fitting. The adsorption capacity was calculated to be 17.92 mg g−1 according to the Langmuir model. From the analysis of the FT-IR spectra, it can be inferred that CN and NH2 were mainly responsible for the adsorption of Co2+ from aqueous solutions. The grafting of cyanoethyl groups on chitosan enhanced the sorption capacity towards Co2+, the magnetic cyanoethyl chitosan bead is economical and effective biosorbent for the treatment heavy metal-containing wastewater.

engineering, chemical, environmental
Magnetic biohybrid chitosan-ethylene glycol diglycidyl ether/magnesium oxide/Fe3O4 nanocomposite for textile dye removal: Box–Behnken design optimization and mechanism study

Ali H. Jawad,Ahmed Saud Abdulhameed,Rangabhashiyam Selvasembian,Zeid A. ALOthman,Lee D. Wilson

DOI: https://doi.org/10.1007/s10965-022-03067-6

IF: 3.061

2022-05-12

Journal of Polymer Research

Abstract:In this research work, a hybrid organic–inorganic magnetic nanocomposite of magnetic chitosan-ethylene glycol diglycidyl ether/magnesium oxide (CS-EGDE/MgO/Fe 3 O 4 ) was prepared as a bioadsorbent material for dye wastewater treatment (reactive blue 19, RB 19). A response surface methodology (RSM) was adopted for the design of 29 experiments to investigate the effect of four factors [A: CS-EGDE/MgO/Fe 3 O 4 dose (0.02–0.1 g), B: pH (4–10), C: temperature (30–60 °C), and time D: (20–80 min)] related to the adsorption of RB 19. The Freundlich adsorption isotherm and the pseudo-second-order kinetics model favourably describe the adsorption of RB 19 by CS-EGDE/MgO/Fe 3 O 4 . The CS-EGDE/MgO/Fe 3 O 4 nanocomposite showed a maximum absorption capacity of 133.8 mg/g with the RB 19 dye at 45 °C. The adsorption mechanism for CS-EGDE/MgO/Fe 3 O 4 -RB 19 dye system involves electrostatic attraction, H- bonding, n-π interaction, and Yoshida H-bonding. This study supports that the nanocomposite system is an efficient bioadsorbent, which can be deployed for effective decontamination of water that contains acidic dye species.

polymer science
Fabrication and Characterization of Magnetic Cellulose–Chitosan–Alginate Composite Hydrogel Bead Bio-Sorbent

Aida Syafiqah Abdul Rahman,Ahmad Noor Syimir Fizal,Nor Afifah Khalil,Ahmad Naim Ahmad Yahaya,Md. Sohrab Hossain,Muzafar Zulkifli

DOI: https://doi.org/10.3390/polym15112494

IF: 5

2023-05-29

Polymers

Abstract:The implementation of inorganic adsorbents for the removal of heavy metals from industrial effluents generates secondary waste. Therefore, scientists and environmentalists are looking for environmentally friendly adsorbents isolated from biobased materials for the efficient removal of heavy metals from industrial effluents. This study aimed to fabricate and characterize an environmentally friendly composite bio-sorbent as an initiative toward greener environmental remediation technology. The properties of cellulose, chitosan, magnetite, and alginate were exploited to fabricate a composite hydrogel bead. The cross linking and encapsulation of cellulose, chitosan, alginate, and magnetite in hydrogel beads were successfully conducted through a facile method without any chemicals used during the synthesis. Energy-dispersive X-ray analysis verified the presence of element signals of N, Ca, and Fe on the surface of the composite bio-sorbents. The appearance and peak's shifting at 3330–3060 cm−1 in the Fourier transform infrared spectroscopy analysis of the composite cellulose–magnetite–alginate, chitosan–magnetite–alginate, and cellulose–chitosan–magnetite–alginate suggested that there are overlaps of O-H and N-H and weak interaction of hydrogen bonding with the Fe3O4 particles. Material degradation, % mass loss, and thermal stability of the material and synthesized composite hydrogel beads were determined through thermogravimetric analysis. The onset temperature of the composite cellulose–magnetite–alginate, chitosan–magnetite–alginate, and cellulose–chitosan–magnetite–alginate hydrogel beads were observed to be lower compared to raw-material cellulose and chitosan, which could be due to the formation of weak hydrogen bonding resulting from the addition of magnetite Fe3O4. The higher mass residual of cellulose–magnetite–alginate (33.46%), chitosan–magnetite–alginate (37.09%), and cellulose–chitosan–magnetite–alginate (34.40%) compared to cellulose (10.94%) and chitosan (30.82%) after degradation at a temperature of 700 °C shows that the synthesized composite hydrogel beads possess better thermal stability, owing to the addition of magnetite and the encapsulation in the alginate hydrogel beads.

polymer science
Magnetic graphene oxide-containing chitosan‐sodium alginate hydrogel beads for highly efficient and sustainable removal of cationic dyes

Jinming Ma,Meng Zhang,Miaomiao Ji,Lexin Zhang,Zhihui Qin,Yaru Zhang,Lili Gao,Tifeng Jiao

DOI: https://doi.org/10.1016/j.ijbiomac.2021.11.054

IF: 8.2

2021-12-01

International Journal of Biological Macromolecules

Abstract:Developing recyclable and efficient adsorbents for cationic dyes removal from wastewater is crucial for ensuring green ecology and drinking water safety. Herein, we demonstrated a novel magnetic gel bead adsorbent that was synthesized by employing graphene oxide (GO) modified Fe3O4 as magnetic nanoparticles doped sodium alginate (SA)/chitosan (CS) gel (SA/GO@Fe3O4/CS). The GO@Fe3O4 sample was prepared based on GO by the chemical co-precipitation method, which not only reduced the aggregation of Fe3O4 but also increases the specific surface area of the composite gel beads. The prepared gel beads were used to adsorb methylene blue (MB), neutral red (NR), and safranine T (ST). The experimental results showed that the adsorption capacity of SA/GO@Fe3O4/CS gel beads for MB, NR, and ST reached 21.325 mg/g, 44.654 mg/g and 44.313 mg/g. After five recycles, the removal rates could still reach more than 90% of the original, exhibiting a high recovery rate. Therefore, this paper provides a strategy for the preparation of high efficiency and recyclable cationic dye adsorbents with a large specific surface area.

polymer science,biochemistry & molecular biology,chemistry, applied
Preparation of magnetic chitosan/polyaniline nanocomposite for efficient remediation of nitrate and phosphate from water

K.J. Deeksha,B. Vishalakshi

DOI: https://doi.org/10.1016/j.jece.2024.114300

IF: 7.7

2024-10-18

Journal of Environmental Chemical Engineering

Abstract:A gel comprising of N-(2-hydroxyethyl)acrylamide (HEAAm), N,N'-methylenebis(acrylamide) (MBA), chitosan (CS), and polyaniline (PANI) made through microwave irradiation was evaluated for effective removal of nitrate and phosphate from water. The material was transformed into a nanocomposite by incorporation of magnetite (Fe 3 O 4 ) nanoparticles. The nitrate and phosphate removal capacity of the nanocomposite was also evaluated in order to understand the effect of the presence of Fe 3 O 4 on the adsorption efficiency of the gel. The nanocomposite exhibited enhanced adsorption capacity of 55.24 mg g −1 towards nitrate when compared to the value of 44.5 mg g −1 for the neat gel without nanoparticles. Also, the phosphate removal was enhanced from 51.4 to 60.60 mg g −1 due to the presence of Fe 3 O 4 nanoparticles. The enhanced adsorption capacity of the nanocomposite is attributed to the increased surface area of the adsorbent (32.53 m 2 g −1 ) arising from the contribution of the Fe 3 O 4 nanoparticles embedded in the polymer matrix; as evidenced by surface area measurements. The superparamagnetic nature of the nanocomposite arising due to the presence of magnetite nanoparticles facilitates easy removal of the adsorbent after use during purification process. The mechanism of adsorption is confirmed to be the electrostatic interaction between the active sites on the nanocomposite and the adsorbate anions as indicated by XPS studies. The extent of adsorption and desorption as indicated by % desorption data and adsorption capacity values remained unchanged for about 5 cycles indicating the reusability potential of the material.

engineering, chemical, environmental
Chitosan-Bead-Encapsulated Polystyrene Sulfonate for Adsorption of Methylene Blue and Regeneration Studies: Batch and Continuous Approaches

Kam Sheng Lau,Nur Alia Sahira Azmi,Siew Xian Chin,Sarani Zakaria,Chin Hua Chia

DOI: https://doi.org/10.3390/polym15051269

IF: 5

2023-03-03

Polymers

Abstract:Textile industrialization causes water pollution due to the discharge of industrial effluents into the environment. To reduce the impact of industrial effluent, it must be treated in wastewater treatment plants before discharge into rivers. Among all wastewater treatment approaches, the adsorption process is one method to remove pollutants from wastewater, but it has some limitations in term of reusability and ionic selective adsorption properties. In this study, we prepared cationic poly (styrene sulfonate) (PSS)-incorporated anionic chitosan beads synthesized using the oil–water emulsion coagulation method. The produced beads were characterized using FESEM and FTIR analysis. In batch adsorption studies, the PSS-incorporated chitosan beads exhibited monolayer adsorption processes, that is, exothermic processes that occur spontaneously at low temperatures, which were analyzed based on the adsorption isotherms, adsorption kinetics, and thermodynamics model fittings. The presence of PSS enables cationic methylene blue dye to adsorb to the anionic chitosan structure via electrostatic interaction between the sulfonic group and the dye molecule. The maximum adsorption capacity of PSS-incorporated chitosan beads achieved 42.21 mg/g, as calculated from the Langmuir adsorption isotherm. Finally, the PSS-incorporated chitosan beads demonstrated good regeneration with different types of reagents, especially using sodium hydroxide as a regeneration reagent. With the use of sodium hydroxide regeneration of this adsorbent material, a continuous adsorption setup also demonstrated that PSS-incorporated chitosan beads can be reused for methylene blue adsorption for up to three cycle processes.

polymer science
Magnetically separable core-shell nanoparticles for simultaneous metal adsorption and dye degradation

Shanza Khan,Waqar-Un Nisa,Shahid Ali Khan,Muhammad Adil Mansoor,Sajjad Haider,Salah Uddin Khan,Xinhua Ouyang,Mudassir Iqbal

DOI: https://doi.org/10.1016/j.optmat.2024.115017

IF: 3.754

2024-02-03

Optical Materials

Abstract:Simultaneous metal extraction and dye degradation using a magnetically reusable nanomaterial is a greater contribution to a sustainable environment perspective. To accomplish this goal, superparamagnetic maghemite (Fe 2 O 3 ) nanoparticles were synthesized and coated with zirconia as well as silica shell using the precipitation method. All the synthesized nanomaterials Fe 2 O 3 , Fe 2 O 3 @ZrO 2 , Fe 2 O 3 @SiO 2, and Fe 2 O 3 @ZrO 2 @SiO 2 were characterized by several techniques including Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM), Vibrating sample magnetometry (VSM), and Energy Dispersive X-ray (EDX) spectroscopy. Adsorption capacity and photocatalytic activity of synthesized nanomaterials were examined by ICP-MS and UV–Vis spectroscopy respectively. All synthesized photocatalysts exhibited excellent adsorption capacity for Pb(II) as well as photocatalytic degradation of methyl orange. Moreover, simultaneous metal extraction and dye degradation was also reported. All four synthesized nanomaterials have excellent removal capability and can easily be removed from the solution by applying an external magnetic field. This research work will open new avenues for the single-step removal of inorganic and organic pollutants from wastewater, which could have potential applications in water purification.

materials science, multidisciplinary,optics
Chitosan-Based Beads Incorporating Inorganic–Organic Composites for Copper Ion Retention in Aqueous Solutions

Andreea Miron,Tanta-Verona Iordache,Artur J. M. Valente,Luisa Maria Rocha Durães,Andrei Sarbu,Georgeta Ramona Ivan,Anamaria Zaharia,Teodor Sandu,Horia Iovu,Anita-Laura Chiriac

DOI: https://doi.org/10.3390/ijms25042411

IF: 5.6

2024-02-20

International Journal of Molecular Sciences

Abstract:In recent years, there has been a challenging interest in developing low-cost biopolymeric materials for wastewater treatment. In the present work, new adsorbents, based on different types of chitosan (commercial, commercial chitin-derived chitosan and chitosan synthesized from shrimp shell waste) and inorganic–organic composites have been evaluated for copper ions removal. The efficacy of the synthesis of chitosan-based composite beads has been determined by studying various characteristics using several techniques, including FTIR spectroscopy, X-ray diffraction, porosimetry (N2 adsorption), and scanning electron microscopy (SEM). Adsorption kinetics was performed using different adsorption models to determine the adsorption behavior of the materials in the aqueous media. For all composite beads, regardless of the type of chitosan used, good capacity to remove copper ions from simulated waters was observed (up to 17 mg/g), which proves that the new materials hold potential for heavy metal retention. However, the adsorption efficiency was influenced by the type of chitosan used. Thus, for the series where commercial chitosan (CC) was used, the removal efficiency was approximately 29%; for the series with chitosan obtained from commercial chitin (SC), the removal efficiency was approximately 34%; for the series with chitosan enriched with CaCO3 (SH), the removal efficiency was approximately 52%.

biochemistry & molecular biology,chemistry, multidisciplinary
Bio-based iron oxide nanoparticles forming bi-functional chitosan composite adsorbent for Cr(VI) decontamination

Aquib Jawed,Animes K. Golder,Lalit M. Pandey

DOI: https://doi.org/10.1016/j.cej.2023.148411

IF: 15.1

2024-01-06

Chemical Engineering Journal

Abstract:Iron oxide nanoparticles (IONPs) synthesized in a bio-based route are viable contenders for the removal of Cr(VI) from contaminated water. However, recovery and reuse of these IONPs are challenging and could limit their practical applicability. Herein, reusable and bi-functional composite chitosan (CS) beads (CS/IONPs) are developed by infusing IONPs in the CS matrix and applied for Cr(VI) adsorption and detoxification from synthetic wastewater. CS/IONPs beads were characterized through various analytical techniques: X-ray diffraction, X-ray photoelectron spectroscopy and Scanning electron microscopy. The loading of IONPs varied from 0.1 to 0.25 (% w/v) with Fe(III)/Fe(II) in a molar ratio of 2. Mesoporous (11.65 nm) CS/IONPs beads with a size from 6.6 − 4.31 mm were formed with a specific surface area of 63.67 m 2 /g compared to 25.42 m 2 /g for CS beads. Cr(VI) removal of 98.71 % was achieved by CS/IONPs adsorbent within 480 min at the optimal conditions of initial pH 3, CS/IONPs dosage 2.5 g/L, temperature 25 °C, and initial Cr(VI) concentration 150 mg/L. The co-existing cations didn't affect Cr(VI) adsorption capacity of CS/IONPs beads, though PO 4 3− and SO 4 2− competed slightly with Cr(VI) adsorption. Cr(VI) removal process was spontaneous and exothermic and followed the pseudo-first-order kinetic. CS/IONPs composite beads could adsorb a maximum of 345.53 mg Cr(VI) per g of IONPs as determined by Langmuir isotherm. The used CS/IONPs beads could be regenerated using NaOH for the initial 4 cycles, but about 15.7 % of active sites were reduced afterwards. Cr(VI) removal involves electrostatic interaction, Cr(VI) reduction to Cr(III), Cr(III) adsorption, Cr(III) surface complexation through abundant –NH 2 group, and Cr(III) co-precipitation with Fe(III).

engineering, chemical, environmental
Magnetic Mg-Fe/LDH Intercalated Activated Carbon Composites for Nitrate and Phosphate Removal from Wastewater: Insight into Behavior and Mechanisms

Omar Alagha,Mohammad Saood Manzar,Mukarram Zubair,Ismail Anil,Nuhu Dalhat Mu'azu,Aleem Qureshi,Nuhu Dalhat Mu’azu

DOI: https://doi.org/10.3390/nano10071361

IF: 5.3

2020-07-12

Nanomaterials

Abstract:This experimental work focused on the synthesis, characterization, and testing of a unique, magnetically separable, and eco-friendly adsorbent composite material for the advanced treatment and efficient removal of nitrate and phosphate pollutants from wastewater. The MgAl-augmented double-layered hydroxide (Mg-Fe/LDH) intercalated with sludge-based activated carbon (SBAC-MgFe) composites were characterized by FT-IR, XRD, BET, VSM, SEM, and TEM techniques, revealing homogeneous and efficient dispersion of MgFe/LDH within the activated carbon (AC) matrix, a highly mesoporous structure, and superparamagnetic characteristics. The initial solution pH, adsorbent dose, contact time, and temperature parameters were optimized in order to reach the best removal performance for both pollutants. The maximum adsorption capacities of phosphate and nitrate were found to be 110 and 54.5 mg/g, respectively. The competition between phosphate and coexisting ions (Cl−, CO32−, and SO42−) was studied and found to be remarkably lower in comparison with the nitrate adsorption. The adsorption mechanisms were elucidated by kinetic, isotherm, thermodynamic modeling, and post-adsorption characterizations of the composite. Modeling and mechanistic studies demonstrated that physisorption processes such as electrostatic attraction and ion exchange mainly governed the nitrate and phosphate adsorption. The composite indicated an outstanding regeneration performance even after five sequences of adsorption/desorption cycles. The fabricated composite with magnetically separable characteristics can be used as a promising adsorbent for the removal of phosphate and nitrate pollutants from wastewater.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Parametric and Kinetic Study of Nitrate Removal from Water by Modified Chitosan Composite Beads

Zainab N. Jamka,Wadood T. Mohammed,,

DOI: https://doi.org/10.23939/chcht18.01.083

2024-03-25

Chemistry & Chemical Technology

Abstract:The contamination of water bodies with harmful pollutants considers an aggravating global problem. The current research focuses on a developing efficient adsorbed for removing nitrate ions from aqueous solutions. The study proposed modified chitosan-zeolite composite beads to enhance the performance of the adsorption process. The zeolite was used to increase the surface area, and Zirconium was loaded on the beads to promote the selectivity for nitrate anions. The adsorption mechanism was assessed by characterizing the beads and sorbate adsorbed beads utilizing X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and analysis with an energy dispersive X-ray analyzer (EDX). The experiments were conducted in a batch system, and the effect of key parameters like contact time, initial nitrate anion concentration, and adsorbent dosage on the adsorption performance was investigated. The results demonstrated that the highest removal of nitrate ions was determined to be 95.42% at 0.2 g of Cs-Ze-Zr adsorbent with an initial concentration of 50 mg/L and a contact time of 120 minutes. The maximum adsorption capacity of the nitrate ions on the manufactured bead was 80.15 mg/g. In addition, among the Freundlich, Langmuir, and Temkin isotherms, the isotherm equilibrium data were consistent with a Freundlich isotherm model. The kinetic data for adsorption were satisfactorily fitted by a pseudo-first order. Subsequently, the results distinctly indicated that the proposed adsorbed (Cs-Ze-Zr) could be employed fruitfully in removing nitrate ions, demonstrated through the remarkable removal efficiency and adsorption capacity obtained in the study.
Novel cationic polymer modified magnetic chitosan beads for efficient adsorption of heavy metals and dyes over a wide pH range

Meng Zhang,Zhi Zhang,Yazhou Peng,Li Feng,Xuhao Li,Chuanliang Zhao,Khan Sarfaraz

DOI: https://doi.org/10.1016/j.ijbiomac.2020.04.020

IF: 8.2

2020-08-01

International Journal of Biological Macromolecules

Abstract:Wastewater containing highly toxic and non-biodegradable heavy metals and organic dyes poses a serious threat to ecological environment and human health. Adsorption has been regarded as a promising technology to purify this kind of wastewater. Therefore, it is of great importance to develop efficient adsorbents. Herein, a magnetically recyclable adsorbent Fe3O4-CS/PDAC was facilely fabricated by coating poly(acryloyloxyethyltrimethyl ammonium chloride)-modified chitosan on the surface of Fe3O4 nanoparticles. The morphology, physical-chemical and magnetic properties of as-prepared Fe3O4-CS/PDAC was fully characterized by various techniques. Its adsorption behaviors towards heavy metal Cr(VI) and organic dye sunset yellow (SY) were systematically investigated. Evidently, Fe3O4-CS/PDAC exhibited adsorption capacities of 163.93 and 769.23 mg/g for Cr(VI) and SY respectively, much higher than other reported adsorbents. Besides, batch experiment results showed that adsorption capacities decreased slightly with pH increasing from 2.0 to 10.0. Furthermore, Fe3O4-CS/PDAC could be easily separated and effectively regenerated after adsorption. The superior adsorption performance of Fe3O4-CS/PDAC could be attributed to the electrostatic interaction and ion exchange between target pollutants and the grafted cationic polymer. Owing to its high adsorption capacity over a wide pH range, rapid separation, easy regeneration and good reusability, Fe3O4-CS/PDAC has great potential for practical application in water treatment.

polymer science,biochemistry & molecular biology,chemistry, applied
Chitosan Nanoparticles as Potential Nano-Sorbent for Removal of Toxic Environmental Pollutants

Asmaa Benettayeb,Fatima Zohra Seihoub,Preeti Pal,Soumya Ghosh,Muhammad Usman,Chin Hua Chia,Muhammad Usman,Mika Sillanpää

DOI: https://doi.org/10.3390/nano13030447

IF: 5.3

2023-01-21

Nanomaterials

Abstract:Adsorption is the most widely used technique for advanced wastewater treatment. The preparation and application of natural renewable and environmentally friendly materials makes this process easier and more profitable. Chitosan is often used as an effective biomaterial in the adsorption world because of its numerous functional applications. Chitosan is one of the most suitable and functionally flexible adsorbents because it contains hydroxyl (-OH) and amine (-NH2) groups. The adsorption capacity and selectivity of chitosan can be further improved by introducing additional functions into its basic structure. Owing to its unique surface properties and adsorption ability of chitosan, the development and application of chitosan nanomaterials has gained significant attention. Here, recent research on chitosan nanoparticles is critically reviewed by comparing various methods for their synthesis with particular emphasis on the role of experimental conditions, limitations, and applications in water and wastewater treatment. The recovery of pollutants using magnetic nanoparticles is an important treatment process that has contributed to additional development and sustainable growth. The application of such nanoparticles in the recovery metals, which demonstrates a “close loop technology” in the current scenarios, is also presented in this review.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Chitosan-based nano-sorbents: synthesis, surface modification, characterisation and application in Cd (II), Co (II), Cu (II) and Pb (II) ions removal from wastewater

Dipesh Chandra,Md. Tamzid Hossain Molla,Md. Abul Bashar,Md. Suman Islam,Md. Shameem Ahsan

DOI: https://doi.org/10.1038/s41598-023-32847-3

2023-04-14

Huanjing Kexue/Environmental Science

Abstract:Abstract In contemplation of treating hazardous industrial wastewater, sodium tripolyphosphate (TPP) and vanillin (V)-modified chitosan-based magnetic nano-sorbents (TPP-CMN and V-CMN) were prepared, and the physical and surface properties of both nano-sorbents were characterised. The results of FE-SEM and XRD showed an average size of between 6.50 and 17.61 nm for Fe 3 O 4 magnetic nanoparticles. The Physical Property Measurement System (PPMS) was carried out, and the saturation magnetisations for chitosan, Fe 3 O 4 nanoparticles, TPP-CMN, and V-CMN were 0.153, 67.844, 7.211, and 7.772 emu.g − 1, respectively. By using multi-point analysis, the BET surface areas of the synthesised TPP-CMN and V-CMN nano-sorbents were found to be 8.75 and 6.96 m 2 /g, respectively. The synthesised TPP-CMN and V-CMN were investigated as effective nano-sorbents to uptake Cd (II), Co (II), Cu (II), and Pb (II) ions, and the results were investigated by AAS. The adsorption process of heavy metals was investigated by the batch equilibrium technique, and the sorption capacity values of Cd (II), Co (II), Cu (II), and Pb (II) ions by TPP-CMN were 91.75, 93.00, 87.25, and 99.96 mg/g. By V-CMN, the values were 92.5, 94.00, 88.75, and 99.89 mg/g, respectively. The equilibrium times for adsorption were found to be 15 minutes for TPP-CMN and 30 minutes for V-CMN nano-sorbents. The adsorption isotherms, kinetics, and thermodynamics were studied to understand the adsorption mechanism. Furthermore, the adsorption of two synthetic dyes and two real wastewater samples was studied and obtained significant results. These nano-sorbents’ simple synthesis, high sorption capability, excellent stability, and recyclability may provide highly efficient and cost-effective nano-sorbents for wastewater treatment.

Regenerable Chitosan-Embedded Magnetic Iron Oxide Beads for Nitrate Removal from Industrial Wastewater

Chitosan-based beads as sustainable adsorbents for wastewater remediation: a review

In-situ magnetic alginate coated chitosan core@shell beads with excellent performance in simulated and real wastewater treatment: Behavior, mechanisms, and new perspectives

Functionally graded chitosan ferrite beads for photocatalytic degradation of Eriochrome Black T and Congo red dyes

Immobilization of In-Situ Formed Ni(OH)2 Nanoparticles in Chitosan Beads for Efficient Removal of U(VI) from Aqueous Solutions

Hybrid Beads of Zero Valent Iron Oxide Nanoparticles and Chitosan for Removal of Arsenic in Contaminated Water

Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads for phosphate removal from water: Preparation, adsorption behavior and pH stability

Biosorptive removal of cobalt(II) from aqueous solutions using magnetic cyanoethyl chitosan beads

Magnetic biohybrid chitosan-ethylene glycol diglycidyl ether/magnesium oxide/Fe3O4 nanocomposite for textile dye removal: Box–Behnken design optimization and mechanism study

Fabrication and Characterization of Magnetic Cellulose–Chitosan–Alginate Composite Hydrogel Bead Bio-Sorbent

Magnetic graphene oxide-containing chitosan‐sodium alginate hydrogel beads for highly efficient and sustainable removal of cationic dyes

Preparation of magnetic chitosan/polyaniline nanocomposite for efficient remediation of nitrate and phosphate from water

Chitosan-Bead-Encapsulated Polystyrene Sulfonate for Adsorption of Methylene Blue and Regeneration Studies: Batch and Continuous Approaches

Magnetically separable core-shell nanoparticles for simultaneous metal adsorption and dye degradation

Chitosan-Based Beads Incorporating Inorganic–Organic Composites for Copper Ion Retention in Aqueous Solutions

Bio-based iron oxide nanoparticles forming bi-functional chitosan composite adsorbent for Cr(VI) decontamination

Magnetic Mg-Fe/LDH Intercalated Activated Carbon Composites for Nitrate and Phosphate Removal from Wastewater: Insight into Behavior and Mechanisms

Parametric and Kinetic Study of Nitrate Removal from Water by Modified Chitosan Composite Beads

Novel cationic polymer modified magnetic chitosan beads for efficient adsorption of heavy metals and dyes over a wide pH range

Chitosan Nanoparticles as Potential Nano-Sorbent for Removal of Toxic Environmental Pollutants

Chitosan-based nano-sorbents: synthesis, surface modification, characterisation and application in Cd (II), Co (II), Cu (II) and Pb (II) ions removal from wastewater