Abstract:Ethanol separation via the pervaporation process has shown growing application potential in solvent recovery and the bioethanol industry. In the continuous pervaporation process, polymeric membranes such as hydrophobic polydimethylsiloxane (PDMS) have been developed to enrich/separate ethanol from dilute aqueous solutions. However, its practical application remains largely limited due to the relatively low separation efficiency, especially in selectivity. In view of this, hydrophobic carbon nanotube (CNT) filled PDMS mixed matrix membranes (MMMs) aimed at high-efficiency ethanol recovery were fabricated in this work. The filler K-MWCNTs was prepared by functionalizing MWCNT-NH2 with epoxy-containing silane coupling agent (KH560) to improve the affinity between fillers and PDMS matrix. With K-MWCNT loading increased from 1 wt % to 10 wt %, membranes showed higher surface roughness and water contact angle was improved from 115° to 130°. The swelling degree of K-MWCNT/PDMS MMMs (2 wt %) in water were also reduced from 10 wt % to 2.5 wt %. Pervaporation performance for K-MWCNT/PDMS MMMs under varied feed concentrations and temperatures were evaluated. The results supported that the K-MWCNT/PDMS MMMs at 2 wt % K-MWCNT loading showed the optimum separation performance (compared with pure PDMS membranes), with the separation factor improved from 9.1 to 10.4, and the permeate flux increased by 50% (40-60 °C, at 6 wt % feed ethanol concentration). This work provides a promising method for preparing a PDMS composite with both high permeate flux and selectivity, which showed great potential for bioethanol production and alcohol separation in industry.

Pressure-Assisted Vacuum Filtration Fabrication of Polymer Membranes with Enhanced Selectivity for the Separation of an Ethanol/Carbon Dioxide Mixture

Solvent-Less Vapor-Phase Fabrication of Membranes for Sustainable Separation Processes

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly(vinyl Chloride) Hollow Fiber Membrane

A Large-Area MOF-based Membrane for Challenging CO2 Purification and Ethanol/co2/n2 Ternary Mixture Separation

Fabrication and Characterization of Carbon Nanotube Filled PDMS Hybrid Membranes for Enhanced Ethanol Recovery.

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Construction of PDMS@ZIF-8 Composite Membrane on PVDF Hollow Fiber Inner Surface for Ultrafast Ethanol/water Separation

Carbon membranes for efficient water-ethanol separation

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Ultrathin Membranes with a Polymer/Nanofiber Interpenetrated Structure for High-Efficiency Liquid Separations

Large-scale preparation of composite membranes for CO2 separation via interfacial polymerization: Monomer selection and processing parameter optimization

Improving CO2 separation performance of PEGDME-PVDF/PP composite membrane

Preparation of multi-layer PDMS/PVDF composite membranes for ethanol recovery from water by pervaporation

Fabrication of ultrafiltration membranes based on methacrylate copolymers containing quaternary ammonium and PEG units for dye removal

Fabrication and Characterization of Poly(vinylidene Fluoride)–polytetrafluoroethylene Composite Membrane for CO2 Absorption in Gas–liquid Contacting Process

Facile Covalent Crosslinking of Zeolitic Imidazolate Framework/Polydimethylsiloxane Mixed Matrix Membrane for Enhanced Ethanol/Water Separation Performance

Sub-micro porous thin polymer membranes for discriminating H2 and CO2

Liquid–liquid interface induced PDMS‐PTFE composite membrane for ethanol perm‐selective pervaporation

Fabrication of highly permeable PDMS@ZIF‐8/PVDF hollow fiber composite membrane in module for ethanol‐water separation

Slot-die Coating of Vinyl-PDMS Composite Membranes for Alcohol Perm-selective Pervaporation

Thin-film Composite Membranes with Modified Polyvinylidene Fluoride Substrate for Ethanol Dehydration Via Pervaporation