Abstract:Alumina materials have widely been used in industrial fields, such as catalysis and adsorption. However, due to the fast sol-gel process and complicated crystalline-phase transformation, the synthesis of alumina materials with both highly ordered mesostructures and crystallized frameworks remains a great challenge. Herein, we report a novel vesicle-aggregation-assembly strategy to prepare highly ordered mesoporous gamma-alumina microspheres with unique shifted double-diamond networks for the first time, by using diblock copolymer poly(ethylene oxide)-b-poly(methyl methacrylate) (PEO-b-PMMA) as a template and aluminum isopropoxide as a precursor in a tetrahydrofuran (THF)/hydrochloric acid binary solvent. During the gradual evaporation of THF and H2O, the as-made Al3+-based gel/PEO-b-PMMA composites can be obtained through a co-assembly process based on the hydrogen bonding interaction between hydroxyl groups of alumina oligomers and PEO segments of the diblock copolymers. The formed composites exhibit a spherical morphology with a wide size distribution (diameter size 1-12 mu m). Furthermore, these composite microspheres possess an inverse bicontinuous cubic mesostructure (double diamond, Pn (3) over barm) with Al3+-based gel buried in the PEO-b-PMMA matrix in the form of two intertwined but disconnected networks. After a simple calcination at 900 degrees C in air, the structure of the resultant mesoporous alumina changes to a relatively low symmetry (shifted double diamond, Fd (3) over barm), ascribed to the shifting of the two alumina networks due to loss of the templates. Meanwhile, the unit cell size of the alumina mesostructure decreases from similar to 131 to similar to 95 nm. The obtained ordered mesoporous alumina products retain the spherical morphology and possess ultra-large mesopores (similar to 72.8 nm), columnar frameworks composed of gamma-alumina nanocrystalline particles (crystal size of similar to 15 nm) and high thermal stability (up to 900 degrees C). As a support of Au nanoparticles, the formed Au/mesoporous gamma-alumina composite catalysts have been used in the catalytic reduction of 4-nitrophenol with a high kinetic constant k of 0.0888 min(-1), implying promising potential as a catalyst support.

Enhancing Interfacial Synergies for the Preparation of High Mechanical Strength and Interconnected Porosity of Alumina Extrudates Through Pre-Wetting Method

Effect of Type and Content of Pore-forming Agents on Properties of Porous Alumina Membrane Support

Effect of Particle Size Distribution of Raw Powders on Pore Size Distribution and Bending Strength of Al2o3 Microfiltration Membrane Supports

Silica Nanoparticle-Decorated Alumina Rough Platelets for Effective Reinforcement of Epoxy and Hierarchical Carbon Fiber/epoxy Composites

Preparation of Ultra-High-strength Alumina Microspheres Based on Fiber Reconstruction Via Multistage Low-Carbon Alcohol Elution

Regulation Mechanism of the Specific Surface Area of Alumina Ceramic Carriers with Hierarchical Porosity Fabricated by Powder Bed Fusion

Hierarchically Porous Alumina Ceramic Catalyst Carrier Prepared by Powder Bed Fusion

Preparation and Characterization of High Flux Alumina Membrane Supports by Composite Pore Former Method

Salt-assisted surface charge driven synthesis of large pores alumina as carbon tolerance support for propane dehydrogenation

A New Way to Prepare Some Supported Catalysts with Highly Specific Surfaces

Hierarchically Porous Alumina Catalyst Carrier with Biomimetic Vein Structure Prepared by Direct Ink Writing

High-strength porous alumina ceramics prepared from stable wet foams

Effect of Support Pore Structure on Hydrodesulfurization Performance of Catalyst

Novel ceramic supports for catalyst with hierarchical pore structures fabricated via additive manufacturing-direct ink writing

A sinter-resistant catalyst using an alumina support recycled from AlP fumigation residue: trash to treasure.

Preparation of Porous Alumina Oxide Film and Its Adhesive Properties with PPS

A Novel Approach to Fabricate Porous Alumina Ceramics with Excellent Properties Via Pore-Forming Agent Combined with Sol Impregnation Technique

High-performance Macro-Porous Alumina-Mullite Ceramic Membrane Supports Fabricated by Employing Coarse Alumina and Colloidal Silica

Facile Preparation and Promising Hydrothermal Stability of Spherical γ-Alumina Support with High Specific Surface Area

A vesicle-aggregation-assembly approach to highly ordered mesoporous γ-alumina microspheres with shifted double-diamond networks.

Synthesis, Characterization and Catalytic Applications of Mesoporous Γ-Alumina from Boehmite Sol