Abstract:The mechanical behavior of two nanocrystalline Al alloys, Al-Mg-Y and Al-Fe-Y, is investigated with in-situ micropillar compression testing. Both alloys were strengthened by a hierarchical microstructure including grain boundary segregation, nanometer-thick amorphous complexions, carbide nanorod precipitates with sizes of a few nanometers, and submicron-scale intermetallic particles. The maximum yield strength of the Al-Mg-Y system was measured to be 950 MPa, exceeding that of the Al-Fe-Y system (680 MPa), primarily due to a combination of more carbide nanorods and more amorphous complexions. Both alloys exhibited yield strengths much higher than those of commercial Al alloys, and therefore have great potential for structural applications. However, some micropillar specimens were observed to plastically soften through shear banding. Post-mortem investigation revealed that intermetallic-free deformation pathways of a few micrometers in length were responsible for this failure. Further characterization showed significant grain growth within the shear band. The coarsened grains maintained the same orientation with each other, pointing to grain boundary mechanisms for plastic flow, specifically grain rotation and/or grain boundary migration. The presence of intermetallic particles made it difficult for both matrix and intermetallic grains to rotate into the same orientation due to the different lattice parameters and slip systems. Therefore, we are able to conclude that a uniform distribution of intermetallic particles with an average spacing less than the percolation length of shear localization can effectively prevent the maturation of shear bands, offering a design strategy for high-strength nanocrystalline Al alloys with both high strength and stable plastic flow.

Microstructural Evolution and Multi-Mechanism Strengthening Model of Nanocrystalline Al-Mg Alloys

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Atomistic and Theoretical Insights on Nanoprecipitates-Controlled Strengthening Behavior for Optimum Mechanical Performance in Nanotwinned NiCoCr Alloys

Nanoscale Precipitates with Quasicrystal Domains Enhanced Strength-Ductility Synergy in a Mg–6Zn–4Al–1Sn–0.5Mn Alloy

Atomic-scale inhomogeneous solute distribution in an ultrahigh strength nanocrystalline Al-8 Mg aluminum alloy

Microstructure and Mechanical Properties of a Multi-Modal Al Alloy with High Strength

Atomistic Insight into Grain Boundary Deformation Induced Strengthening in Layer-Grained Nanocrystalline Al

Microstructure evolution, mechanical property response and strengthening mechanism induced by compositional effects in Al–6 Mg alloys

Nanoscale coherent interface strengthening of Mg alloys

Nanocrystalline Al-Mg with extreme strength due to grain boundary doping

Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling

Microstructure based analysis and predictive modeling of cast Al7Si1.5Cu0.4Mg alloy mechanical properties

Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys

The Influences of Multiscale Second-Phase Particles on Strength and Ductility of Cast Mg Alloys

Intermetallic particle heterogeneity controls shear localization in high-strength nanostructured Al alloys

Structural modeling and mechanical research of carbon nanotube reinforced aluminum matrix composites using strain gradient theory

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

An Insight into Mg Alloying Effects on Cu Thin Films:Microstructural Evolution and Mechanical Behavior

Near-theoretical Strength and Deformation Stabilization Achieved Via Grain Boundary Segregation and Nano-Clustering of Solutes

Microstructure and mechanical properties of as-cast ultralight and high strength Mg-10Li-3Al-3Zn-xY alloy with multi-precipitates