Abstract:The stacking sequences of fiber reinforced thermoplastic and aluminum influence the mechanical behavior. In the current work, fiber‐metal laminates (FMLs) consisting of alternated continuous fiber‐reinforced thermoplastic composite layers and aluminum alloy sheets were proposed by the hot‐pressing method. Carbon fiber‐reinforced polyamide 6 (PA6/CF) and glass fiber‐reinforced polypropylene (PP/GF) prepregs were selected as composite layers. The effect of the assembly method between composite prepreg and aluminum sheets as well as the stacking configurations on the flexural response of FMLs were investigated. Meanwhile, the macro and micro‐structural observations were performed to characterize failure mechanisms in these structures. Experimental results revealed that the strength and stiffness of hybrid FLMs depended on the material property on the surface layer. With the stacking sequence of aluminum sandwiched by PA6/CF achieved the highest flexural strength of 535.3 MPa and modulus of 63.6 GPa in the series of FMLs, which could achieve satisfied lightweight and strength‐stiffness properties. The ductile deformation of aluminum sheets and fracturing and pulling out of the fibers were the main characterized failure mechanisms of thermoplastic FMLs. For glass fiber‐metal laminates, stacking configurations of three aluminum sheets alternation with four PP/GF intermediate layers achieved a favorable flexural property. Above all, the proposed thermoplastic FMLs have great potential in civil applications especially in the automobile industry as structural parts. Highlights Thermoplastic fiber‐metal laminates are designed and fabricated. The assembly method and stacking sequences influence the flexural property. FMLs with PA6/CF and aluminum achieve satisfied strength stiffness. PP/GF prepreg and aluminum layer display ductile deformation mode.

Investigation on Impact Damage and Residual In-Plane Compression Strength of FML Laminates

Micro Failure Analysis of Fiber Metal Laminates

Finite Element Analysis of Configuration and Fiber Orientation Effects on Fiber Metal Laminates Subjected to Low Velocity Impact

Fatigue Crack Growth in Fiber-Metal Laminates

Low-velocity impact behavior and residual tensile strength of CFRP laminates

Investigation on the Low-Velocity Impact Behaviour of Non-Symmetric FMLs—experimental and Numerical Methods

Residual tension behavior and damage evolution mechanisms of fiber metal laminates with various low-velocity impacted damage

Investigation on Impact Behavior of FMLs under Multiple Impacts with the Same Total Energy: Experimental Characterization and Numerical Simulation

On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Influence of Impactor Shape on Low-Velocity Impact Behavior of Fiber Metal Laminates Combined Numerical and Experimental Approaches

Experimental Investigation of the Double Impact Position Effect on the Mechanical Behavior of Low-Velocity Impact in CFRP Laminates

Simulation on Impact Response of FMLs: Effect of Fiber Stacking Sequence, Thickness, and Incident Angle

Investigation of structure–flexural response relations in thermoplastic carbon/glass fiber‐metal laminates

Effect of Metal Type on the Energy Absorption of Fiber Metal Laminates under Low-Velocity Impact

Experimental and Numerical Simulation on Formability and Failure Behavior of Thermoplastic Carbon Fiber/AL Composite Laminates

Investigation of the Contact Interface between Natural Fibre Metal Laminates under Tension Using Finite Element Analysis (FEA)

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Experimental Investigation on the Low-Velocity Impact Responses of Fibre Metal Laminates with Various Internal and External Factors

Investigation of flexure response and damage behavior of CFRP/aluminum hybrid laminates among various temperatures