Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Sandwich-type Composited Solid Polymer Electrolytes to Strengthen the Interfacial Ionic Transportation and Bulk Conductivity for All-Solid-state Lithium Batteries from Room Temperature to 120 °C

Polyethylene Glycol Functionalized Polyhedral Cage Silsesquioxane As All Solid-State Polymer Electrolyte for Lithium Metal Batteries

A Flexible Sandwich‐Type Hybrid Solid Polymer Electrolyte Enables High‐Temperature of 80 °C Resistant Lithium Metal Solid‐State Batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Quasi-Solid-State Polymer Electrolyte Based on Highly Concentrated LiTFSI Complexing DMF for Ambient-Temperature Rechargeable Lithium Batteries

Solid Polymer Electrolytes with Fragment-Separated Microphase for Advanced Li Ion Transport and Highly Stable Lithium Metal Batteries

10 μm‐Thick High‐Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All‐Solid‐State Lithium‐Metal Batteries

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

Polymer Electrolytes Reinforced by 2D Fluorinated Filler for All-Solid-state Li-Fe-F Conversion-Type Lithium Metal Batteries

Quasi-Solid-State Polymer Electrolyte Based on High-Concentrated LiTFSI Complexing DMF for Ambient-Temperature Rechargeable Lithium Batteries

Hollow Nanotubular Clay Composited Comb-Like Methoxy Poly(ethylene Glycol) Acrylate Polymer As Solid Polymer Electrolyte for Lithium Metal Batteries

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte.

Solid Polymer Electrolytes Based On Cross-Linked Polybenzoxazine Possessing Poly(Ethylene Oxide) Segments Enhancing Cycling Performance Of Lithium Metal Batteries

Solvent-free In-Situ Polymerized Plastic Crystal Electrolytes for Long-Cycling Lithium Metal Batteries

Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Polymer dispersed ionic liquid electrolytes with high ionic conductivity for ultrastable solid‐state lithium batteries

Polyacrylonitrile Fibers Network Reinforced Polymer Electrolyte with Li-Sn Alloy Layer Protected Li Anode Toward Ultra-Long Cycle Lifespan for Room-Temperature Solid-State Batteries