Abstract:A high-sensitivity interferometric optical microfiber sensor based on liquid cladding is proposed to detect liquid samples temperatures in special environments. The sensor is manufactured by arc discharge and flame-brushing technology and is encapsulated in a capillary tube and covered with deionized water. The sensor is more susceptible to the influence of the external environment due to the strong evanescent field on the tapered fiber surface. High-sensitivity measurement near room temperature is important, which can be used for effective diagnosis and treatment of local temperature of biological tissues in the field of biosensing. Compared with the silica material, the sensor based on liquid encapsulation has a larger thermo-optical coefficient, and the difference between the thermo-optic coefficient of water and the optical fiber is greater. The results show that with increasing ambient temperature, the wavelength of the transmission spectrum shifts towards shorter wavelengths. The device without liquid packaging has a temperature sensitivity of −57 pm/°C, and the liquid-encapsulated microfiber can reach −415 pm/°C ranging from 30-50 °C, which is 7<sup>+</sup> times higher than the former. In addition to improving the temperature sensitivity of the sensor, the water cladding can protect the microfiber from damage. This sensor can be used as a basic sensing unit in remote and intelligent optical fiber sensor networks with great application potential in marine environment monitoring, biomedicine diagnosis and chemical reaction research.

High Sensitivity Temperature Sensor Based on Directional Coupler in a Liquid-Filled Tapered Hollow Suspended Dual-Core Fiber

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Highly-sensitive temperature sensor based on an all-in-fiber directional coupler

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

High-sensitivity Temperature Sensor Based on a Droplet-Like Fiber Circle

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Liquid-Crystal-Filled Side-hole Fiber for High-Sensitivity Temperature and Electric Field Measurement

A Highly Sensitive Temperature Sensor Based on A Liquid-Sealed S-Tapered Fiber

Highly Sensitive Optical Fiber Temperature Sensor Based on the Thermal Shift of the Liquid–air Interface

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

In-Line Interferometric Temperature Sensor Based on Dual-Core Fiber

Ultra-high sensitivity SPR temperature sensor based on a helical-core fiber

High-sensitivity Fiber Liquid Crystals Temperature Sensor with Tiny Size and Simple Tapered Structure

A Temperature Sensor Based on Composite Optical Waveguide

Highly sensitive curvature and temperature sensor based on double groove structure and hollow core fiber

Two-core photonic crystal fiber with selective liquid infiltration in the central air hole for temperature sensing

Highly Sensitive and Fast Surface Temperature Sensor Based on Standard Single-Mode Fiber Using Double Heterodyne Interference Technology

Highly sensitive liquid level and temperature sensors based on all-fiber intermodal interferometers