Abstract:Abstract Helical flow of non-Newtonian fluids in concentric and eccentric annuli is of great interest in oil/gas well drilling. Experimental results and field measurements demonstrated that frictional pressure loss in the annulus can be affected substantially by the rotation of the drillpipe. Previous studies indicated that the influence of pipe rotation on annular friction pressure loss is affected by fluid properties, flow regime, annular diameter ratio and eccentricity. This article presents results of in-depth experimental and theoretical investigations conducted on the flow of yield power law (Herschel Buckley) fluids in concentric and eccentric annuli with pipe rotation. The aim of this study is to develop a reliable hydraulic model that accounts for the effect of pipe rotation in annular pressure loss calculations. Extensive flow experiments with polymer-based fluids were carried out using a newly developed testing facility. Four different annular geometries have been considered for the investigation. Five different formulations of test fluid were prepared by varying concentrations of Xanthan Gum (XG) and Polyanionic Cellulose (PAC) for each annular geometry. Accurate fluid characterization was made using the horizontal pipe sections and a rotational viscometer. In addition to the experimental work, theoretical analysis of helical flows in concentric annuli was carried out. Experimental results indicate the strong presence of shear thinning and inertial effects when inner pipe rotates. In highly eccentric annuli, inertial effects dominate the phenomenon of shear thinning and result in increased pressure loss as the speed increases. Inertial effects can be generated due eccentricity and/or geometric irregularities of the annulus that substantially influence the velocity field as the pipe rotates. The experimental measurements and theoretical analysis presented in this investigation are very useful for hydraulic program optimization and well control, particularly for managed pressure drilling (MPD) operations. Introduction Helical flow of non-Newtonian fluids in concentric and eccentric annuli is of great interest in oil well drilling. Laboratory test results 1–7 and field measurements 8–16 demonstrated that frictional pressure loss in the annulus can be affected substantially by the rotation of the drill pipe. The effect of pipe rotation on friction pressure loss is mainly influenced by fluid properties (rheology and density), flow regime, diameter ratio and eccentricity. The change in friction pressure loss due pipe rotation is attributed to different flow phenomena such as:shear thinning in non-Newtonian fluid;inertial effects resulting from pipe eccentricity and/or geometric irregularities such as drillpipe wobbling or eccentricity variation and;formation of secondary flows. Shear Thinning: Shear thinning in non-Newtonian flows tends to reduce the friction pressure loss due to the coupling of axial and rotational flow through shear rate dependent apparent viscosity function. Inertial Effect: Streamlines in concentric annular flow form perfectly helical pattern. This means that the magnitude of velocity of a fluid element at a given radius from the center is constant. However, a rotating eccentric pipe and/or wobbling drillpipe generates very complicated flow patterns in the annulus, resulting in substantial variation of the velocity of a fluid element along the streamline. Consequently, the inertial effects that positively influence the friction pressure loss counteract the effect of shear thinning in eccentric annuli.

Advanced calculation method for rheological characterisation of non-Newtonian drilling fluids using Herschel-Bulkley model

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

High Accuracy Determination of Rheological Properties of Drilling Fluids Using the Marsh Funnel

Prediction of High-Pressure/High-Temperature Rheological Properties of Drilling Fluids from the Viscosity Data Measured on a Coaxial Cylinder Viscometer

Rheological modeling of water based drilling fluids containing polymer/bentonite using generalized bracket formalism

Generalized Models for the Field Assessment of Drilling Fluid Viscoelasticity

Integration Approach to Solve the Couette Inverse Problem Based on Nonlinear Rheological Models in a Coaxial Cylinder Rheometer

Modeling fluctuating pressure in the eccentric annulus with a four-parameter rheological method

Flow Analysis of Field-Controllable, Electro- and Magneto-Rheological Fluids Using Herschel-Bulkley Model

Rheological modeling and simulation of semi-solid slurry based on experimental study

Rheological characterization of a thixotropic semisolid slurry by means of numerical simulations of squeeze flow experiments

A Novel Prediction Model of the Drag Coefficient of Shale Cuttings in Herschel–Bulkley Fluid

Improvements in Drilling Fluid Rheology Predictions Using Rotational Viscometer

Study Of Field-Controllable, Electro- And Magneto-Rheological Fluid Dampers In Flow Mode Using Herschel-Bulkley Theory

Research on measurement method of drilling fluid rheological parameters based on helical pipe

Viscosity-model-independent generalized Reynolds number for laminar flow of shear-thinning and viscoplastic fluids

Effects of Slip and Rheological Parameters on the Flow and Heat Transfer of a Herschel-Bulkley Fluid

Rheology-based wall function approach for wall-bounded turbulent flows of Herschel–Bulkley fluids

Experimental Study and Modeling of Yield Power-Law Fluid Flow in Annuli with Drillpipe Rotation

Application and Optimization of the Rheological Model for a Hydrophobically Associating Dendrimer Polymer

Evaluation of Various Shear-Thinning Models for Squalane Using Traction Measurements, TEHD and NEMD Simulations