Abstract:Organic electroactive materials, particularly semiconducting polymers, are at the forefront of emerging organic electronics. Among the plethora of unique features, the possibility to formulate inks out of these materials is particularly promising for the large‐scale manufacturing of electronics at lower cost on a variety of soft substrates. While solution deposition of semiconducting materials is promising for developing printed electronics, the environmental footprint of the materials and related devices needs to be considered to achieve sustainable manufacturing. Towards the development of greener printed electronics, this work investigates the utilization of a non‐toxic, environmentally‐friendly solvent, namely branched polyethylene (BPE), to formulate semiconducting inks. Focusing on a diketopyrrolopyrrole‐based (DPP) semiconducting polymer, shellac as dielectric, and BPE as the solvent, solutions were prepared in different concentrations and their rheological properties were characterized. Then, printing on polyethylene terephthalate (PET) substrates using two different techniques was performed to fabricate organic field‐effect transistors (OFETs). Both printing techniques yielded OFETs with good performance and device characteristics, averaging approximately 10−2 and 10−4 cm2 V−1 s−1, respectively, for slot‐die coating and direct‐ink writing deposition. Notably, despite some difference in threshold voltages, OFETs produced via slot‐die coating and direct‐ink writing showed comparable charge mobilities to previously reported OFETs prepared from similar materials, particularly those prepared on silicon dioxide wafers. Overall, this work confirms the suitability of BPE to formulate semiconducting inks to develop printed electronics in a greener manner. The printing methodology developed in this work also open new avenues for the design of functional printed electronics and related technologies.

The Role of Substrates and Electrodes in Inkjet-Printed PEDOT:PSS Thermoelectric Generators

Role of substrate and electrodes on inkjet-printed PEDOT:PSS thermoelectric generators

Fully inkjet-printed Ag2Se flexible thermoelectric devices for sustainable power generation

Preparation and Characterization of Screen-Printed Cu2S/PEDOT:PSS Hybrid Films for Flexible Thermoelectric Power Generator

Inkjet Printing Flexible Thermoelectric Devices Using Metal Chalcogenide Nanowires

The Effect of Substrate on Continuous Electrohydrodynamic Printing

Thermoelectric Inks and Power Factor Tunability in Hybrid Films through All Solution Process

Inkjet-Printed Conductive Polymer Films for Optoelectronic Devices

A Design of Experiments Study on Inkjet Printed PEDOT:PSS Temperature Sensors

Electrohydrodynamic Printing of Microscale PEDOT:PSS-PEO Features with Tunable Conductive/Thermal Properties.

Preparation of High Performance Poly (3,4-Ethylenedioxythiophene) Nanoparticles Ink and Its Inkjet Printability

A Scalable Fully Printed Organic Thermoelectric Generator for Harsh Environments Enabled by a Stable n‐type Polymer

Fabrication of PEDOT:PSS/Graphene Conductive Ink Printed on Flexible Substrate

Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface Engineering

Printing organic‐field effect transistors from semiconducting polymers and branched polyethylene

High Figure‐of‐Merit Telluride‐Based Flexible Thermoelectric Films through Interfacial Modification via Millisecond Photonic‐Curing for Fully Printed Thermoelectric Generators

High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals

Advances in Printing Techniques for Thermoelectric Materials and Devices

Two-step surface treatment of femtosecond laser irradiation and ionic liquid to enhance thermoelectric properties of PEDOT:PSS films

A high-conductivity n-type polymeric ink for printed electronics

Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations