Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

In Situ Exsolved CoFe Alloy Nanoparticles on Gd2SrCo0.8Fe1.2O7−δ for Direct Hydrocarbon Fuel Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

In-situ exsolved NiFe alloy nanoparticles on Pr0.8Sr1.2(NiFe)O4-δ for direct hydrocarbon fuel solid oxide fuel cells

In-situ exsolved FeRu alloy nanoparticles on Ruddlesden-Popper oxides for direct hydrocarbon fuel solid oxide fuel cells

In Situ Exsolved NiFe/(NiFe)O x Core–Shell-Structured Nanocatalysts on Perovskite Anode with Enhanced Coking Resistance

Highly Active and Stable Cu-Based Anode Decorated with In Situ Fabricated CuFe Alloy Nanoparticles for Solid Oxide Fuel Cells

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Synthesis and Characterisation of Nanocrystalline CoxFe1-xGDC Powders as a Functional Anode Material for the Solid Oxide Fuel Cell

Nano La0.6Ca0.4Fe0.8Ni0.2O3−δ Decorated Porous Doped Ceria As a Novel Cobalt-Free Electrode for “symmetrical” Solid Oxide Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Exsolved Alloy Nanoparticles Decorated Ruddlesden–Popper Perovskite As Sulfur-Tolerant Anodes for Solid Oxide Fuel Cells

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

Sulfur‐Tolerant Hierarchically Porous Ceramic Anode‐Supported Solid‐Oxide Fuel Cells with Self‐Precipitated Nanocatalyst

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

A highly active and carbon-tolerant anode decorated with in situ grown cobalt nano-catalyst for intermediate-temperature solid oxide fuel cells

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Redox-Reversible Electrode Material for Direct Hydrocarbon Solid Oxide Fuel Cells

Enhancing the Catalytic Activity and Coking Tolerance of the Perovskite Anode for Solid Oxide Fuel Cells through In Situ Exsolution of Co-Fe Nanoparticles