Abstract:Solid oxide fuel cells (SOFCs) can directly convert the chemical energy in fuel to electrical energy with fuel flexibility; however, the conventional nickel-based anodes face great challenges due to coking upon direct oxidation of hydrocarbon fuels and redox instability. Thus, developing new anode materials which can provide high coking resistance as well as redox stability is crucial. In this work, Ba 0.6 La 0.4 Fe 0.8 Mo 0.1 Ni 0.1 O 3− δ (BLFMN) has been synthesized in air using a sol–gel combustion method, resulting in a dual phase consisting of a cubic BLFMN main phase and scheelite BaMoO 4 (BMO 4 ) secondary phase. By heat-treating the BLFMN dual phase in H 2 at 800 °C for 5 h, a metallic nanoparticle-decorated BLFMN triple phase compound comprising cubic BLFMN, cubic BaMoO 3 (BMO 3 ) and in situ exsolved FeNi 3 alloy was obtained. BLFMN was subsequently investigated as an electrode material for La 0.8 Sr 0.2 Ga 0.83 Mg 0.17 O 3− δ (LSGM) electrolyte (300 μm) supported SOFCs. Symmetrical cells using BLFMN as electrodes with the cell configuration of BLFMN//LSGM//BLFMN showed excellent redox reversibility and a peak power density (PPD) of 1.32 W cm −2 at 850 °C when using H 2 as fuel. Single cell with the cell configuration of BLFMN//LSGM//LSCF (La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3− δ ) reached PPD of 1.61 and 0.41 W cm −2 at 850 °C when operating with H 2 and CH 4 fuel, respectively. Moreover, the single cell exhibit excellent stability (over 300 h) upon direct oxidation of hydrocarbon fuels of CH 4 and C 3 H 8 . This study indicates that BLFMN is a promising redox reversible and coking resistant anode for SOFCs.

Redox-Reversible Electrode Material for Direct Hydrocarbon Solid Oxide Fuel Cells

A Redox-Stable Direct-Methane Solid Oxide Fuel Cell (SOFC) with Sr2FeNb0.2Mo0.8O6−δ Double Perovskite As Anode Material

A redox-reversible A/B-site co-doped BaFeO3 electrode for direct hydrocarbon solid oxide fuel cells

Sulfur-Tolerant Redox-Reversible Anode Material for Direct Hydrocarbon Solid Oxide Fuel Cells

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer

Smart Dual‐Exsolved Self‐Assembled Anode Enables Efficient and Robust Methane‐Fueled Solid Oxide Fuel Cells

A High-Performing Sulfur-Tolerant and Redox-Stable Layered Perovskite Anode for Direct Hydrocarbon Solid Oxide Fuel Cells

A double perovskite decorated carbon-tolerant redox electrode for symmetrical SOFC

Electrochemical Performance of Pr 0.4 Sr 0.5 Co x Fe 0.9– x Mo 0.1 O 3−δ Oxides in a Reversible SOFC/SOEC System

A Redox−reversible Perovskite Electrode for CeO2− and LaGaO3−based Symmetric Solid Oxide Fuel Cells

A Redox-Robust Ceramic Anode-Supported Low-Temperature Solid Oxide Fuel Cell

High-Performanced Cathode with A Two-Layered R-P Structure for Intermediate Temperature Solid Oxide Fuel Cells

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Mo-Doped LSCF as a Novel Coke-Resistant Anode for Biofuel-Fed SOFC

Significantly Improving the Durability of Single-Chamber Solid Oxide Fuel Cells: A Highly Active CO2-Resistant Perovskite Cathode

Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization

Sulfur Tolerant Redox Stable Layered Perovskite SrLaFeO4 − Δ As Anode for Solid Oxide Fuel Cells

Enhanced electrochemical redox kinetics of La0.6Sr0.4Co0.2Fe0.8O3 in reversible solid oxide cells

A Rational Design of FeNi Alloy Nanoparticles and Carbonate-Decorated Perovskite As a Highly Active and Coke-Resistant Anode for Solid Oxide Fuel Cells

Ni Doped La0.6Sr0.4FeO3-δ Symmetrical Electrode for Solid Oxide Fuel Cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells