Abstract:Traditionally, microsecond pulsed electric field was widely used in cell electrofusion technology. However, it was difficult to fuse the cells with different sizes. Because the effect of electroporation based on microsecond pulses was greatly influenced by cell sizes. It had been reported that the differences between cell sizes can be ignored when cells were exposed to nanosecond pulses. However, pores induced by those short nanosecond pulses tended to be very small (0.9 nm) and the pores were more easy to recover. In this work, a finite element method was used to simulate the distribution, radius and density of the pores. The innovative idea of "cell electrofusion based on nanosecond/microsecond pulses" was proposed in order to combine the advantages of nanosecond pulses and microsecond pulses. The model consisted of two contact cells with different sizes. Three kinds of pulsed electric fields were made up of two 100-ns, 10-kV/cm pulses; two 10-μs, 1-kV/cm pulses; and a sequence of a 100-ns, 10-kV/cm pulse, followed by a 10-μs, 1-kV/cm pulse. Some obvious advantageous can be found when nanosecond/microsecond pulses were considered. The pore radius was large enough (70nm) and density was high (5×1013m-2) in the cell junction area. Moreover, pores in the non-contact area of the cell membrane were small (1-10 nm) and sparse (109-1012m-2). Areas where the transmembrane voltage was higher than 1V were only concentrated in the cell junction. The transmembrane voltage of other areas were at most 0.6V when we tested the rest of the cell membrane. Cell fusion efficiency can be improved remarkably because electroporation was concentrated in the cell contact area.

Controllable and Stable Fusion Strategy on Microfluidics.

Microfluidic Chip for Cell Fusion and in Situ Separation of Fused Cells.

Cell electrofusion in microfluidic devices: A review

A High‐throughput Dielectrophoresis‐based Cell Electrofusion Microfluidic Device

Design and Performance of a High-Efficiency Cell-Electrofusion Device

A Cell Electrofusion Microfluidic Device Integrated with 3D Thin-Film Microelectrode Arrays

Highly Integrated Microfluidic Device for Cell Pairing, Fusion and Culture

A microengineered cell fusion approach with combined optical tweezers and microwell array technologies

A Cell Electrofusion Microfluidic Chip with Micro-Cavity Microelectrode Array

A cell electrofusion microfluidic chip using discrete coplanar vertical sidewall microelectrodes.

Soi Substrate-Based Microfluidic Chip For Cell Electrofusion

Cell electrofusion based on nanosecond/microsecond pulsed electric fields.

Controllable cell electroporation using microcavity electrodes

Chip-Based Cell Electrofusion

Study of High-Throughput Cell Electrofusion in a Microelectrode-Array Chip

Cell Electrofusion Based on Nanosecond/microsecond Pulsed Electric Fields

Somatic and Stem Cell Pairing and Fusion Using a Microfluidic Array Device

Rapid Cell Pairing and Fusion Based on Oscillating Bubbles Within an Acoustofluidic Device.

Mechanism Study on the Influences of Buffer Osmotic Pressure on Microfluidic Chip-Based Cell Electrofusion

Automated Laser-Induced Cell Fusion Based on Microwell Array

Cell Electrofusion Based on Straight-Line Interdigital Microelectrode Array