Abstract:A high-throughput cell electrofusion microfluidic chip has been designed, fabricated on a silicon-on-insulator wafer and tested for in vitro cell fusion under a low applied voltage. The developed chip consists of six individual straight microchannels with a 40-μm thickness conductive highly doped Si layer as the microchannel wall. In each microchannel, there are 75 pairs of counter protruding microelectrodes, between which the cell electrofusion is performed. The entire highly doped Si layer is covered by a 2-μm thickness aluminum film to maintain a consistent electric field between different protruding microelectrode pairs. A 150-nm thickness SiO₂ film is subsequently deposited on the top face of each protruding microelectrode for better biocompatibility. Owing to the short distance between two counter protruding microelectrodes, a high electric field can be generated for cell electrofusion with a low voltage imposed across the electrodes. Both mammalian cells and plant protoplasts were used to test the cell electrofusion. About 42-68% cells were aligned to form cell-cell pairs by the dielectrophoretic force. After cell alignment, cell pairs were fused to form hybrid cells under the control of cell electroporation and electrofusion signals. The averaged fusion efficiency in the paired cells is above 40% (the highest was about 60%), which is much higher than the traditional polyethylene glycol method (<5%) and traditional electrofusion methods (∼12%). An individual cell electrofusion process could be completed within 10 min, indicating a capability of high throughput.

A Cell Electrofusion Microfluidic Chip with Micro-Cavity Microelectrode Array

A cell electrofusion microfluidic chip using discrete coplanar vertical sidewall microelectrodes.

A Cell Electrofusion Microfluidic Device Integrated with 3D Thin-Film Microelectrode Arrays

Soi Substrate-Based Microfluidic Chip For Cell Electrofusion

A High‐throughput Dielectrophoresis‐based Cell Electrofusion Microfluidic Device

Study of High-Throughput Cell Electrofusion in a Microelectrode-Array Chip

Microfluidic Chip for Cell Fusion and in Situ Separation of Fused Cells.

A 3-D Microelectrodes Array Microchip Applied to Cell Fusion.

Cell Electrofusion Based on Straight-Line Interdigital Microelectrode Array

Thin Film Electrode Based Cell Electrofusion Chip

Somatic and Stem Cell Pairing and Fusion Using a Microfluidic Array Device

Research and development of a cell electrofusion microchip

Design and Performance of a High-Efficiency Cell-Electrofusion Device

Chip-Based Cell Electrofusion

Micro Chip with Nanostructured Membranes for Cell Morphology Monitoring

Cell electrofusion in microfluidic devices: A review

Design of Chip with High-Efficient CellElectrofused System Based on MEMS

Controllable and Stable Fusion Strategy on Microfluidics.

A Microfluidic Flip-Chip Combining Hydrodynamic Trapping and Gravitational Sedimentation for Cell Pairing and Fusion

Highly Integrated Microfluidic Device for Cell Pairing, Fusion and Culture

Development of High-Efficiency Cell-Electrofusion Device