Ionic-liquid-modified MOFs Incorporated in a Mixed-Matrix Membrane by Metal-Site Anchoring for Gas Separation

Chang Li,Wenhai Zhang,Qin Meng,Haibiao Xu,Chong Shen,Guoliang Zhang

DOI: https://doi.org/10.1039/d4cc00484a

IF: 4.9

2024-01-01

Chemical Communications

Abstract:Through metal-site anchoring, metal–organic frameworks (MOFs) were modified with ionic liquids (ILs) and used as a porous filler to prepare mixed-matrix membranes (MMMs).

What problem does this paper attempt to address?

Ionic liquid modified MOFs incorporated mixed matrix membrane by metal site anchoring for gas separation

Guoliang Zhang,Chang Li,Wenhai Zhang,Qin Meng,Haibiao Xu,Chong Shen

DOI: https://doi.org/10.1039/d4cc00484a

IF: 4.9

2024-03-17

Chemical Communications

Abstract:Through metal site anchoring, metal organic frameworks (MOFs) were modified with ionic liquids (ILs) and used as porous filler to prepare mixed matrix membranes (MMMs). The targeted growth of IL exposed more active sites and greatly enhanced CO2 transfer in MMMs which exhibited excellent gas separation performance and long durability.

chemistry, multidisciplinary
Ionic Liquids as the MOFs/Polymer Interfacial Binder for Efficient Membrane Separation

Rijia Lin,Lei Ge,Hui Diao,Victor Rudolph,Zhonghua Zhu

DOI: https://doi.org/10.1021/acsami.6b11074

2016-11-23

Abstract:Obtaining strong interfacial affinity between filler and polymer is critical to the preparation of mixed matrix membranes (MMMs) with high separation efficiency. However, it is still a challenge for micron-sized metal organic frameworks (MOFs) to achieve excellent compatibility and defect-free interface with polymer matrix. Thin layer of ionic liquid (IL) was immobilized on micron-sized HKUST-1 to eliminate the interfacial nonselective voids in MMMs with minimized free ionic liquid (IL) in polymer matrix, and then the obtained IL decorated HKUST-1 was incorporated into 4,4'-(hexafluoroisopropylidene)diphthalic anhydride-2,3,5,6-tetramethyl-1,3-phenyldiamine (6FDA-Durene) to fabricate MMMs. Acting as a filler/polymer interfacial binder, the favorable MOF/IL and IL/polymer interaction can facilitate the enhancement of MOF/polymer affinity. Compared to MMM with only HKUST-1 incorporation, MMM with IL decorated HKUST-1 succeeded in restricting the formation of nonselective interfacial voids, leading to an increment in CO2 selectivity. The IL decoration method can be an effective approach to eliminate interfacial voids in MMMs, extending the filler selection to a wide range of large-sized fillers.
Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Yang Li,Xu Zhang,Xuan Chen,Kaijie Tang,Qin Meng,Chong Shen,Guoliang Zhang

DOI: https://doi.org/10.1021/acsami.8b20422

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Poly(vinyl alcohol)-sodium alginate composite hydrogels were first introduced to synthesize robust and well-intergrown zeolite imidazolate framework (ZIF)/polymer hollow fiber membranes. Through enough adsorption interaction with metal ions by chelation, sufficient nucleation sites for in situ metal-organic framework (MOF) preparation are provided. Using this method, we can not only easily prepare defect-free MOF membranes ignoring the complex modification process and seed deposition but also structurally fix crystalline MOF layers and greatly improve the stiffness and durability of MOF composite membranes. The strategy also gives the appropriate level of generality for synthesis of versatile dense MOF membranes on a variety of polymeric supports. The fabricated ZIF-8/polyethersulfone membrane presented remarkable gas separation performance with H2 permeance of as high as 9.66 × 10-7 mol m-2 s-1 Pa-1 and a high H2/CO2 separation factor of up to 29.0.
Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Wanbin Li,Zhihong Yang,Guoliang Zhang,Zheng Fan,Qin Meng,Chong Shen,Congjie Gao

DOI: https://doi.org/10.1039/c3ta13781c

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Metal–organic framework (MOF) membranes used for gas separation have attracted considerable attention recently. Although there are studies focusing on their continuous growth on inorganic substrates, MOF–polymer membranes are in demand because of their low cost, high processing ability and large membrane area. To achieve this purpose, the flexibility of the polymer must be reduced and the MOF-to-substrate adhesion strength should be greatly enhanced. Herein, a continuous and well inter-grown Cu3(BTC)2–PAN composite membrane has been successfully fabricated by directly growing via a covalent linker. Dehydrogenation, cyclization and crosslinking reactions of the PAN hollow fiber by solvothermal treatment can greatly improve the stiffness and compression strength of the composite membrane. To increase the adhesion strength effectively, a covalent linker between the MOF layer and PAN substrate is provided by chemical modification. The prepared membrane achieves a high H2 permeance of 7.05 × 10−5 mol (m−2 s−1 Pa−1) and a good separation factor of 7.14 for binary H2–CO2 mixtures with high thermal and pressure stability. Our strategy has also been developed for preparing a continuous and well inter-grown ZIF-8–PAN membrane. A very thin ZIF-8 layer is finally synthesized due to the large number of nucleation sites on the substrate. All of these distinguished properties suggest that MOF–PAN composite membranes fabricated by chemical modification are promising candidates for gas separation.
Optimization of a MOF Blended with Modified Polyimide Membrane for High-Performance Gas Separation

Yushu Zhang,Hongge Jia,Qingji Wang,Wenqiang Ma,Guoxing Yang,Shuangping Xu,Shaobin Li,Guiming Su,Yanqing Qu,Mingyu Zhang,Pengfei Jiang

DOI: https://doi.org/10.3390/membranes12010034

IF: 4.562

2021-12-27

Membranes

Abstract:The preparation, characterization and gas separation properties of mixed matrix membranes (MMMs) were obtained from polyimide capped with ionic liquid and blended with metal-organic frameworks (MOFs). The synthesized MOF was amine functionalized to produce UiO-66-NH2, and its amino group has a higher affinity for CO2. Mixed matrix membranes exhibited good membrane forming ability, heat resistance and mechanical properties. The polyimide membrane exclusively capped by ionic liquid exhibited good permselectivity of 74.1 for CO2/CH4, which was 6.2 times that of the pure polyimide membrane. It is worth noting that MMM blended with UiO-66-NH2 demonstrated the highest ideal selectivity for CO2/CH4 (95.1) with a CO2 permeability of 7.61 Barrer, which is close to the 2008 Robeson upper bound. The addition of UiO-66-NH2 and ionic liquid enhanced the permselectivity of MMMs, which may be one of the promising technologies for high performance CO2/CH4 gas separation.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Metal based gels as versatile precursors to synthesize stiff and integrated MOF/polymer composite membranes

pengcheng su,wanbin li,congyang zhang,qin meng,chong shen,guoliang zhang

DOI: https://doi.org/10.1039/c5ta04400f

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:Great advances have been made in metal-organic framework membranes recently. However, preparation of stiff and integrated MOF/polymer membranes still remains a big issue. Herein, metal based gels as versatile precursors were first employed to prepare continuous and integrated MOF/polymer hollow fiber membranes. The metal based gel was put into/on various polymer substrates adequately, which can be transformed into pure MOF crystals and lead to formation of continuous MOF crystals on the surface and in the pores of the hollow fiber easily. By using this method, we can not only fabricate continuous MOF membranes without a conventional activation step but also can greatly enhance the stiffness of the membranes through mutual support of MOFs and substrates. The strategy also has an appropriate level of generality which can be used for preparation of inter-grown MOF membranes on different kinds of substrates. The prepared membranes exhibited excellent gas separation performance with a H-2/N-2 separation factor as high as 22.7.
Self-supported membranes fabricated by a polymer‒hydrogen bonded network with a rigidified MOF framework

Zibo Yang,Dudu Li,De Ao,Chao Ma,Ning Li,Yuxiu Sun,Zhihua Qiao,Chongli Zhong,Michael D. Guiver

DOI: https://doi.org/10.1016/j.memsci.2022.120427

IF: 9.5

2022-05-01

Journal of Membrane Science

Abstract:Mixed matrix membranes (MMMs) combine the advantages of porous fillers and polymer membranes, endowing them with potential applications in gas separation. Due to their high porosity and defined pore sizes, metal‒organic frameworks (MOFs) have been extensively investigated as MMM fillers. However, the frameworks of many MOFs are flexible, which may limit selectivity. Here, hydrogen bonding between polyimide (PI) and flexible MIL-53(Al) with large pore size (M53-L) is utilized to rigidify the framework in a series of PI/M53-L MMMs. The high pore volume and large pore size of rigid M53-L increased the affinity of CO2 with hydroxy groups, leading to higher separation performance than the pure PI membrane. The separation performance of PI/M53-L MMMs exceeds the Robeson 2008 upper bounds for both CO2/N2 and CO2/CH4. We propose a method of utilizing hydrogen bonds to rigidify flexible MOF frameworks to prepare self-supporting MMMs, providing a strategy for the application of flexible MOFs in gas separation.

engineering, chemical,polymer science
Preparation of Amino-Functional UiO-66/PIMs Mixed Matrix Membranes with [bmim][Tf2N] as Regulator for Enhanced Gas Separation

Jiangfeng Lu,Xu Zhang,Lusheng Xu,Guoliang Zhang,Jiuhan Zheng,Zhaowei Tong,Chong Shen,Qin Meng

DOI: https://doi.org/10.3390/membranes11010035

IF: 4.562

2021-01-04

Membranes

Abstract:Development of mixed matrix membranes (MMMs) with excellent permeance and selectivity applied for gas separation has been the focus of world attention. However, preparation of high-quality MMMs still remains a big challenge due to the lack of enough interfacial interaction. Herein, ionic liquid (IL)-modified UiO-66-NH2 filler was first incorporated into microporous organic polymer material (PIM-1) to prepare dense and defect-free mixed matrix membranes via a coating modification and priming technique. IL [bmim][Tf2N] not only improves the hydrophobicity of UiO-66-NH2 and facilitates better dispersion of UiO-66-NH2 nanoparticles into PIM-1 matrix, but also promotes the affinity between MOFs and polymer, sharply reducing interface non-selective defects of MMMs. By using this strategy, we can not only facilely synthesize high-quality MMMs ignoring non-selective interfacial voids, but also structurally regulate MOF nanoparticles in the polymer substrate and greatly improve interface compatibility and stability of MMMs. The method also gives suitable level of generality for fabrication of versatile defect-free MMMs based on different combination of MOFs and PIMs. The prepared UiO-66-NH2@IL/PIM-1 membrane exhibited outstanding gas separation behavior with large CO2 permeation of 8283.4 Barrer and high CO2/N2 selectivity of 22.5.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Mixed-Matrix Membranes Containing Porous Materials for Gas Separation: from Metal–Organic Frameworks to Discrete Molecular Cages

Ziqi Yang,Zhongjie Wu,Shing Bo Peh,Yunpan Ying,Hao Yang,Dan Zhao

DOI: https://doi.org/10.1016/j.eng.2022.07.022

IF: 12.834

2023-01-01

Engineering

Abstract:Mixed-matrix membranes (MMMs), which combine porous materials with a polymeric matrix, have gained considerable research interest in the field of gas separation due to their complementary characteristics and cooperative activation. The tailorability and diversity of porous materials grant MMMs extendable functionalities and outstanding separation performance. To achieve the full potential of MMMs, researchers have focused on the rational matching of porous fillers with polymeric matrixes to achieve enhanced compatibility at the interfaces of these materials. In this review, we highlight state-of-the-art advances in combining metal–organic frameworks (MOFs) and metal–organic cages (MOCs) with polymeric matrixes to fabricate MMMs using different strategies. We further discuss the opportunities and challenges presented by the future development of MMMs, with the aim of boosting MMM fabrication with judicious material design and selection.
Metal-Organic Frameworks Corset with a Thermosetting Polymer for Improved Molecular-Sieving Property of Mixed-Matrix Membranes

Sheng Yang,Yuhan Wang,Peng Lu,Hua Jin,Fusheng Pan,Zixing Shi,Xue-song Jiang,Chen Chen,Zhongyi Jiang,Yanshuo Li

DOI: https://doi.org/10.1021/acsami.0c17426

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Metal-organic frameworks (MOFs) are promising materials for gas separation membranes. However, the framework flexibility affects their molecular-sieving properties. Herein, we restrict the flexibility of zeolitic imidazolate framework-7 (ZIF-7) by controlling its phase transition in mixed-matrix membranes (MMMs), relying on the so-called "space-confinement effect" of a novel thermosetting polymer, poly 2,2'-(p-oxydiphenyl)-5,5'-bibenzimidazole (OPBI) polymer. Compared with the pure OPBI membrane, the optimized membranes containing 30 wt % ZIF-7 with a narrow-pore (np) phase (ZIF-7-II) exhibited a significant improvement in H-2/CO2 separation, e.g., the H-2/CO2 ideal selectivity increased similar to 2.8 times, surpassing the state-of-the-art upper bound of polymeric membranes and exhibited excellent stability at increased pressure and temperature (8 bar, 180 degrees C).
Fabrication of Functionalized MOFs Incorporated Mixed Matrix Hollow Fiber Membrane for Gas Separation

Haitao Zhu,Xingming Jie,Yiming Cao

DOI: https://doi.org/10.1155/2017/2548957

2017-01-01

Journal of Chemistry

Abstract:The metal-organic framework (MOFs) of MIL-53 was functionalized by aminosilane grafting and then incorporated into Ultem®1000 polymer matrix to fabricate mixed matrix hollow fiber membrane (MMHFM) with high separation performance. SEM, XRD, and TGA were performed to characterize the functionalized MIL-53 and prepared MMHFM. The filler particles were embedded in membrane successfully and dispersed well in the polymer matrix. The incorporation of MOFs endowed MMHFM better thermal stability. Moreover, effects of solvent ratio in spinning dope, spinning condition, and testing temperature on gas separation performance of MMHFM were investigated. By optimizing dope composition, air gap distance, and bore fluid composition, MMHFM containing functionalized MIL-53 achieved excellent gas permeance and CO 2 /N 2 selectivity. The CO 2 permeance increased from 12.2 GPU for pure Ultem HFM to 30.9 GPU and the ideal CO 2 /N 2 selectivity was enhanced from 25.4 to 34.7 simultaneously. Additionally, gas permeance increased but the selectivity decreased with the temperature increase, which followed the solution-diffusion based transport mechanism.

chemistry, multidisciplinary
Surface modification of bilayer structure on metal-organic frameworks towards mixed matrix membranes for efficient propylene/propane separation

Yuxiu Sun,Lei Tian,Zhihua Qiao,Chenxu Geng,Xiangyu Guo,Chongli Zhong

DOI: https://doi.org/10.1016/j.memsci.2022.120350

IF: 9.5

2022-04-01

Journal of Membrane Science

Abstract:Rational matching of filler-matrix in mixed matrix membranes (MMMs) is crucial but challenging for highly efficient gas separation. Herein, we propose a bilayer structure modification strategy on metal-organic frameworks (MOFs) to design various MOF-based MMMs for efficient propylene/propane separation. The octadecylphosphonic acid-lecithin-cholesterol bilayer structure grafted onto the surface of MOFs strengthens their sieving capacity under the premise of maintaining good interfacial compatibility, and promotes the formation of holes in the cross-linked poly(ethylene oxide) (XLPEO) polymer matrix. This allows for the simultaneous enhancement of gas permeability (∼266 Barrer) and C3H6/C3H8 selectivity (40.5). We briefly investigated the effect of the modified bilayer structure on the gas separation performance. More importantly, this constructing strategy is also effective for other MOF fillers in MMMs; thus this design of bilayer modification at a molecular level opens new insights into optimizing MOF-based MMMs in the challenging olefin/paraffin separation.

engineering, chemical,polymer science
Fabrication of metal-organic framework-mixed matrix membranes with abundant open metal sites through dual-induction mechanism

Caijiao Yu,Yueyao Liang,Xiangyu Guo,Zhihua Qiao,Chongli Zhong

DOI: https://doi.org/10.1016/j.seppur.2022.120850

IF: 8.6

2022-06-01

Separation and Purification Technology

Abstract:Metal-organic framework (MOF)-mixed matrix membranes (MMMs) have the potential to overcome the trade-off limitations between gas separation performance and large-scale fabrication. However, most conventional MOF MMMs are used for CH4/N2 separation systems, the preparation of MOF-MMMs with high permeance and good selectivity for N2/CH4 separation has rarely been reported. Here in, we propose supported thin MOF-MMMs with abundant open metal sites to preferentially adsorb N2 and improve the N2/CH4 separation performance. The formation of the selectivity layer with abundant open metal sites was realized through dual-induction mechanism of in-situ Co2+ ion doping and polydimethylsiloxane (PDMS) solution post-modification. The introduction of Co2+ ions restricted the coordination of Zn-N and increased the number of open metal sites in the ZIF layer during its formation. The post-treated PDMS solution with weak acid could further induce the formation of open metal sites. Meanwhile, the electron paramagnetic resonance and synchrotron radiation-based XAFS results also confirmed that the number of open metal sites in the separation layer increased gradually with the in-situ Co2+ ion decoration and PDMS solution post-modification. In addition, the PDMS also could repair the intercrystalline defects of the MOF membranes and reduce their non-selectivity area. Therefore, the synthesized ZIF-8 MMMs showed a high N2 permeance of 1367 GPU and a moderate N2/CH4 selectivity of up to 6.

engineering, chemical
MOF based membranes in gas separation area

Zetian Chen,E.-S. Salama

DOI: https://doi.org/10.1051/e3sconf/202455302013

2024-07-25

E3S Web of Conferences

Abstract:Microporous metal organic framework materials are a series of noticeable membrane materials for the separation of gas molecules and liquid molecules. MOFs can be functionalized through tuning pore size through the variation of ligand length, metal nodes and more, or through adjusting adsorption site such as functional sites, linker functional sites, and open metal sites. Membranes can provide higher structure stability for MOFs, however, addressing synthetic, processing, and design challenges is crucial to produce MOF films with excellent mechanical integrity, chemical stability, and high performance under relevant industrial conditions,such as interfacial compatibility issues towards Mixed-Matrix-Membranes (MMMs) and Pure-MOF film issues regarding chemical and thermal robustness, morphology, and orientation. The alkyne/alkene separation, alkane/alkene separation and more gas mixture has been proven can be achieved through the use of MOF-based membranes, moreover, compared to traditional methods, MOF-based membranes possess better performance on separating forementioned gas mixtures with higher selectivity, purity and less harm to the environment.
Preparation and Gas Separation Properties of Metal-Organic Framework Membranes: Preparation and Gas Separation Properties of Metal-Organic Framework Membranes

zhongshang dou,jianfeng cai,yuanjing cui,jiancan yu,guodong qian,yu yang,tifeng xia

DOI: https://doi.org/10.1002/zaac.201400574

2015-01-01

Zeitschrift für anorganische und allgemeine Chemie

Abstract:Continuous and intergrown metal-organic framework (MOE) membranes, MIL-100(In) (MIL represents Materials Institute Lavoisicr), were prepared directly on porous anodic alumina oxide (AAO) membranes using an in situ crystallization method. The pore surface of MIL-100(In) is conferred with polarity due to the presence of the 1,3,5-benzenetricarboxylic acid. The thickness of MIL-100(In) membranes was tuned by varying the reactant concentration of indium chloride and 1,3.5-benzenetricarboxylic acid. Single gas permeation measurements on this MOE membrane indicate the largo perineanccs of 0.90 X 10(-6) and 0.81 X 10(-6) mol.m(-2).s(-1).Pa-1 for CO2 and CH4, and relatively high ideal selective factors of 3.75 and 3.38 for CO2/N-2 and CH4/N-2, respectively.
Design of Mixed‐Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving

Rifan Hardian,Jiangtao Jia,Alejandro Diaz‐Marquez,Supriyo Naskar,Dong Fan,Osama Shekhah,Guillaume Maurin,Mohamed Eddaoudi,Gyorgy Szekely

DOI: https://doi.org/10.1002/adma.202314206

IF: 29.4

2024-03-23

Advanced Materials

Abstract:The separation of high‐value‐added chemicals from organic solvents is of prime importance for many industries but it is associated with a large energy consumption penalty. Suitably, membrane‐based nanofiltration offers potential for a more energy‐efficient separation than the conventional energy‐intensive thermal processes. Conceivably, mixed‐matrix membranes (MMMs), encompassing metal–organic frameworks (MOFs) as fillers, are poised to promote selective separation via molecular sieving, synergistically combining polymers flexibility and fine‐tuned porosity of MOFs. Nevertheless, conventional direct mixing of MOFs with polymer solutions results in underutilization of the MOF fillers owing to their uniform cross‐sectional distribution. Therefore, in this work, we propose a multizoning technique for the formation of MMMs with an asymmetric‐filler density at the macroscale, in which the MOF fillers are distributed only on the surface of the membrane, and a seamless interface at the nanoscale. Our design strategy demonstrates five times higher MOF surface coverage, which results in a solvent permeance five times higher than that of conventional MMMs while maintaining high selectivity. Practically, MOFs are paired with polymers of similar chemical nature in order to enhance their adhesion without the need for additional surface modification. Our approach offers permanently accessible MOF porosity, which translates to effective molecular sieving, as exemplified by the polybenzimidazole and Zr–BI–fcu‐MOF system. Our findings pave the way for the development of composite materials with a seamless interface. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Interface regulation of mixed matrix membranes by ultrathin MOF nanosheet for faster CO2 transfer

Jingmeng Wan,Mengjie Nian,Chao Yang,Kai Ge,Junjie Liu,Zhiquan Chen,Jingui Duan,Wanqin Jin

DOI: https://doi.org/10.1016/j.memsci.2021.119991

IF: 9.5

2022-02-01

Journal of Membrane Science

Abstract:Mixed matrix membranes (MMMs) incorporating porous materials received extensive attention for applications of gas separation, but the one shows significant high permeability and increased selectivity is rare. Here, we report a strategy of interface regulation in two groups of MMMs via formed H-bonding by a newly designed and ultrathin metal organic framework nanosheet (MOFN). The chemically stable MOFN (thickness: 5–8 nm) with lamellae of micrometre lateral dimensions was prepared from [Hf6] cluster and tricarboxylate ligand, where the capping molecule of formic acid coordinates with Hf4+ ion as H-bonding donor toward incorporated polymers and also acts as an anisotropic regulator for MOFN growth. The well-distributed MOFN in two polymers shows sharply promoted CO2 permeability (720 GPU and 2085 GPU), as well as enhanced separation factor, over wide pressure and temperature ranges that are suitable for CO2 capture from natural gas. This is because the H-bonding regulated polymer-MOFN alignments lead to contractile channel and abundant porosity, validated by Raman mapping and positron annihilation lifetime spectroscopy. This work not only gives rise two candidate membranes for selective CO2 removal from naturals gas, but also, more prospectively, deliveries a design philosophy for construction of advanced MMMs.

engineering, chemical,polymer science
Poly(ionic liquid)-Functionalized UiO-66-(OH)2: Improved Interfacial Compatibility and Separation Ability in Mixed Matrix Membranes for CO2 Separation

Ziqi Yang,Yunpan Ying,Yunchuan Pu,Dechao Wang,Hao Yang,Dan Zhao

DOI: https://doi.org/10.1021/acs.iecr.1c04648

2022-01-01

Industrial & Engineering Chemistry Research

Abstract:Incorporating porous materials into a polymeric matrix to produce mixed matrix membranes (MMMs) usually offers the combined properties of each component. However, it requires efficient dispersity of porous materials in a polymeric matrix and good compatibility between them. To enhance the compatibility, we report an approach by covalent grafting of poly(ionic liquid) (PIL) brushes on the surface of metal-organic framework (MOF) UiO-66(OH)2. Benefiting from the surface grafted PIL brushes, the assynthesized UiO-66-(OH)2@PIL shows an improved dispersity in the solvent media and Pebax matrix due to the hydrophilicity of PIL and the formed hydrogen bonds between the MOF fillers and Pebax matrix. The obtained UiO-66-(OH)2@PIL-based MMMs manifest simultaneously increased selectivity and permeability for CO2/N2 separation, with the best performance at 20 wt % of loading (CO2 permeability of 132 Barrer and CO2/N2 separation factor of 71). This work highlights the efficiency of MOF functionality to achieve enhanced interfacial compatibility and membrane separation performance.
Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes Through in Situ Modulation for Efficient Gas Separation.

Yutao Liu,Hui Chen,Tong Li,Yongheng Ren,Hui Wang,Zhengxuan Song,Jianhui Li,Qiang Zhao,Jinping Li,Libo Li

DOI: https://doi.org/10.1002/anie.202309095

2023-01-01

Angewandte Chemie

Abstract:Polycrystalline metal-organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural "trade-off" was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H2 /CO2 separation with selectivity up to 82.5.
Solid-solvent processing of ultrathin, highly loaded mixed-matrix membrane for gas separation

Guining Chen,Cailing Chen,Yanan Guo,Zhenyu Chu,Yang Pan,Guozhen Liu,Gongping Liu,Yu Han,Wanqin Jin,Nanping Xu

DOI: https://doi.org/10.1126/science.adi1545

IF: 56.9

2023-09-23

Science

Abstract:Mixed-matrix membranes (MMMs) that combine processable polymer with more permeable and selective filler have potential for molecular separation, but it remains difficult to control their interfacial compatibility and achieve ultrathin selective layers during processing, particularly at high filler loading. We present a solid-solvent processing strategy to fabricate an ultrathin MMM (thickness less than 100 nanometers) with filler loading up to 80 volume %. We used polymer as a solid solvent to dissolve metal salts to form an ultrathin precursor layer, which immobilizes the metal salt and regulates its conversion to a metal-organic framework (MOF) and provides adhesion to the MOF in the matrix. The resultant membrane exhibits fast gas-sieving properties, with hydrogen permeance and/or hydrogen–carbon dioxide selectivity one to two orders of magnitude higher than that of state-of-the-art membranes.

multidisciplinary sciences

Ionic-liquid-modified MOFs Incorporated in a Mixed-Matrix Membrane by Metal-Site Anchoring for Gas Separation

Ionic liquid modified MOFs incorporated mixed matrix membrane by metal site anchoring for gas separation

Ionic Liquids as the MOFs/Polymer Interfacial Binder for Efficient Membrane Separation

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Optimization of a MOF Blended with Modified Polyimide Membrane for High-Performance Gas Separation

Metal based gels as versatile precursors to synthesize stiff and integrated MOF/polymer composite membranes

Self-supported membranes fabricated by a polymer‒hydrogen bonded network with a rigidified MOF framework

Preparation of Amino-Functional UiO-66/PIMs Mixed Matrix Membranes with [bmim][Tf2N] as Regulator for Enhanced Gas Separation

Mixed-Matrix Membranes Containing Porous Materials for Gas Separation: from Metal–Organic Frameworks to Discrete Molecular Cages

Metal-Organic Frameworks Corset with a Thermosetting Polymer for Improved Molecular-Sieving Property of Mixed-Matrix Membranes

Fabrication of Functionalized MOFs Incorporated Mixed Matrix Hollow Fiber Membrane for Gas Separation

Surface modification of bilayer structure on metal-organic frameworks towards mixed matrix membranes for efficient propylene/propane separation

Fabrication of metal-organic framework-mixed matrix membranes with abundant open metal sites through dual-induction mechanism

MOF based membranes in gas separation area

Preparation and Gas Separation Properties of Metal-Organic Framework Membranes: Preparation and Gas Separation Properties of Metal-Organic Framework Membranes

Design of Mixed‐Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving

Interface regulation of mixed matrix membranes by ultrathin MOF nanosheet for faster CO2 transfer

Poly(ionic liquid)-Functionalized UiO-66-(OH)2: Improved Interfacial Compatibility and Separation Ability in Mixed Matrix Membranes for CO2 Separation

Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes Through in Situ Modulation for Efficient Gas Separation.

Solid-solvent processing of ultrathin, highly loaded mixed-matrix membrane for gas separation