Enhanced Production of Aromatics from Syngas over CoMnAl Oxides Combined with B-Axis Thickness Tailored HZSM-5

Ruixin Guo,Jia Liu,Hao Wang,Xing Yu,Jian Zhang,Chengguang Yang,Jiong Li,Yuhan Sun,Peng Gao

DOI: https://doi.org/10.1039/d4qm00059e

IF: 8.6834

2024-01-01

Materials Chemistry Frontiers

Abstract:A decreasing b-axis thickness and an appropriate density of Brønsted acid sites of HZSM-5 favors the syngas conversion to aromatics.

What problem does this paper attempt to address?

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Yu Yue,Xi Zhixiang,Zhou Bingjie,Jiang Binbo,Liao Zuwei,Yang Yao,Wang Jingdai,Huang Zhengliang,Sun Jingyuan,Yang Yongrong

DOI: https://doi.org/10.1007/s40242-021-1253-9

2021-01-01

Abstract:Acidity plays a vital role in methane conversion by co-feeding method, which is one of the best strategies to improve the utilization and gentle the reaction conditions of methane. In this work, Zn, Ni, Mo, La, Ga, Fe and Co-impregnated ZSM-5 zeolites have been prepared with the same substitutions to variate the acidities and tested in co-aromatization of methanol with methane. It is demonstrated that the new medium-strong acid sites formed by metal and strong acid sites are the key role to activate methane in co-reaction. Zn-modified ZSM-5 catalyst is preferred to exhibit the best methane conversion of 12%, whose aromatic selectivity increases from 27.2% to 52.2% compared with that of HZSM-5. Besides, the addition of methane further improves the production of high-valued aromatics compared with methanol to aromatics (MTA) reaction.
Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Zhixiang Xi,Bingjie Zhou,Yue Yu,Binbo Jiang,Zuwei Liao,Jingdai Wang,Zhengliang Huang,Yao Yang,Jingyuan Sun,Yongrong Yang

DOI: https://doi.org/10.1039/d0cy00449a

IF: 6.177

2020-01-01

Catalysis Science & Technology

Abstract:The co-reaction method provides an efficient strategy for methane conversion under mild conditions, which is of urgent importance for direct valorization of natural gas to liquid hydrocarbons.
Effect of Metal on the Methanol to Aromatics Conversion over Modified ZSM-5 in the Presence of Carbon Dioxide

Caixia Xu,Binbo Jiang,Zuwei Liao,Jingdai Wang,Zhengliang Huang,Yongrong Yang

DOI: https://doi.org/10.1039/c6ra27104a

IF: 4.036

2017-01-01

RSC Advances

Abstract:Interaction of catalysts' active sites with CO2affected the aromatics yield of the MTA reaction over modified catalysts in a CO2atmosphere.
Enhanced Aromatic Selectivity by the Sheet-Like ZSM-5 in Syngas Conversion

Junhao Yang,Ke Gong,Dengyun Miao,Feng Jiao,Xiulian Pan,Xiangju Meng,Fengshou Xiao,Xinhe Bao

DOI: https://doi.org/10.1016/j.jechem.2018.10.008

2019-01-01

Abstract:Aromatics are important basic chemicals. However, direct conversion of syngas via the conventional Fischer-Tropsch synthesis produces little aromatics. We presented herein that a bifunctional composite of ZSM-5 in combination with ZnCrOx catalyzes syngas conversion to aromatics. Particularly, ZSM-5 crystals with a sheet-like morphology can enhance significantly the aromatization activity. The lower length ratio of the b/a axes of the crystals, the more aromatics form but without influencing the selectivity of small molecules such as CH4 and C2–C4. Since the acid properties and the Al chemical environment were not altered while the morphology changed, the enhanced aromatic selectivity is likely attributed to the favored diffusion of aromatics in these sheet-like crystals.
Selective Conversion of Syngas to Aromatics over Metal Oxide/hzsm-5 Catalyst by Matching the Activity Between CO Hydrogenation and Aromatization

Chang Liu,Su Liu,Haibo Zhou,Junjie Su,Wenqian Jiao,Lin Zhang,Yangdong Wang,Heyong He,Zaiku Xie

DOI: https://doi.org/10.1016/j.apcata.2019.117206

IF: 5.723

2019-01-01

Applied Catalysis A General

Abstract:Syngas conversion to aromatics has been studied over metal oxide/HZSM-5 bifunctional catalyst. In this reaction, CO is activated on metal oxide and hydrogenated to C-1/C-2 intermediate. The formation of aromatics involves C-C coupling, cycfization and dehydrogenation on acid sites of HZSM-5. The matching between CO hydrogenation and aromatization activity is key to the overall catalytic performance. High aromatic selectivity of up to 82.5% may be achieved over various metal oxide/HZSM-5 catalyst among which Cr2O3/HZSM-5 is the best in activity and aromatic selectivity. The CO activation and hydrogenation over Cr2O3 are facilitated by doping of Zn. The effect of Zn doping is revealed by systematic study on phase, morphology, reducibility and oxygen defect concentration. To enhance CO conversion and to prevent excessive hydrogenation, the strict control of Zn/Cr ratio and the phase of Zn species is required. The activity of HZSM-5 may be altered by changing Si/Al ratio and zeolite/oxide ratio and a moderate acid strength and density is necessary to balance the competition between aromatization and side reactions. Furthermore, the stability of the optimal catalyst 1Zn-3Cr/HZSM-5(18) is demonstrated with no significant deactivation after 100 h on stream.
Bifunctional Catalysts with Versatile Zeolites Enable Unprecedented Para-Xylene Productivity for Syngas Conversion under Mild Conditions

Hao Wang,Peng Gao,Shenggang Li,Ting Wang,Chengguang Yang,Jiong Li,Tiejun Lin,Liangshu Zhong,Yuhan Sun

DOI: https://doi.org/10.1016/j.checat.2022.01.014

2022-01-01

Chem Catalysis

Abstract:The direct conversion of syngas to aromatics has received consider-able attention. The development of a highly active and stable catalyst with tunable selectivity for the synthesis of aromatics remains a great challenge, notwithstanding the understanding of the reaction mechanism. In this study, we fabricated a series of high-performance bifunctional catalysts comprising CoMnAl catalysts, which contain Co2C nanoprisms as the active phase, and versatile HZSM-5@silicalite-1 zeolites, with a hollow nanostructure and a scaly shell, for the transformation of syngas into aromatics. The catalysts achieve a CO conversion 70% under mild reaction conditions (280 degrees C, 2 MPa), with ultrahigh stability. The selectivity toward aro-matics is higher than 63% with <2.9% selectivity toward CH4, and the para-xylene (PX) fraction of the aromatics produced reaches 34.7%, leading to unprecedentedly high space-time yield of PX. Furthermore, the reaction pathway and the intermediates involved in the formation of the aromatic products are also determined.
Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

Bo Zhao,Peng Zhai,Pengfei Wang,Jiaqi Li,Teng Li,Mi Peng,Ming Zhao,Gang Hu,Yong Yang,Yong-Wang Li,Qianwen Zhang,Weibin Fan,Ding Ma

DOI: https://doi.org/10.1016/j.chempr.2017.06.017

IF: 23.5

2017-01-01

Chem

Abstract:irect synthesis of aromatics from syngas is a great challenge because of severe operating conditions and low yield of aromatics. Making this process more competitive than the MTA (methanol to aromatics) process will require high energy efficiency and low CO2 emission. A combination of Na-Zn-Fe5C2 and hierarchical HZSM-5 with uniform mesopores dramatically changed the product distribution of Fischer-Tropsch synthesis, leading to 51% aromatic selectivity under the stable stage with CO conversion >85%. C12+ heavy hydrocarbons almost disappeared, and the catalyst showed good stability. The hierarchical zeolitic structure and Bronsted acidity of HZSM-5 could be precisely tuned by controlling the alkali treatment conditions and the degree of ion exchange. The appropriate density and strength of the Bronsted acid sites and the hierarchical pore structure of HZSM-5 endowed the catalyst with an unprecedented aromatic yield. This work shows a broad area for development for syngas conversion.
Two-way Desorption Coupling to Enhance Syngas to Aromatics by MnO/H-ZSM-5

Syed Zulfiqar Ali Gilani,Le Lu,Muhammad Tahir Arslan,Babar Ali,Qi Wang,Fei Wei

DOI: https://doi.org/10.1039/D0CY00275E

IF: 6.177

2020-01-01

Catalysis Science & Technology

Abstract:Aromatics are one of the most important bulk chemicals used in modern industries, rapid economic development and environmental issues that originate from the use of fossil fuels force us to search for clean and sustainable ways to produce fuels and chemicals from high carbon and renewable resources like syngas. We herein report, a composite catalyst containing, partially reducible and highly active manganese oxide and nano size H-ZSM-5 with short b-axis, prepared for the direct conversion of syngas to aromatics. We achieved high aromatic selectivity of 83% at a stable CO conversion of 21% for at least 200 hours without any deactivation. Manganese oxide not only helped in C-O bond activation, and formation of methanol, alkenes and dienes, but it also helped in aromatic desorption from H-ZSM-5 pores. On the other hand, H-ZSM-5 facilitated immediate withdrawal of intermediates from MnOx into its pores and converted them into aromatics. This both way desorption capability of composite catalysts enhanced conversion and selectivity when they were present in a proximity of few nm distance from each other. The key intermediates species during induction time were found to be cyclopentenones, furans, aldehydes and OH containing compounds. Theses intermediate species were converted to aromatics through multiple reaction routes, such as, Gatterman-Koch reaction, Aldol-Condensation and Prins reaction mechanisms. Factors that were responsible for consistent performance and long life of composite catalyst were, nano-size H-ZSM-5 with short b-axis, aromatic desorption ability of manganese oxide, and the presence of H2 in reaction system. This work paved the way for the use of single metal oxide catalyst for efficient aromatization of syngas in a single step process.
Utilization of Metal-Functionalized ZSM-5 for Methanol and Low-Carbon Hydrocarbon Coupling Aromatization

Ruiyuan Tang,Yani Li,Yue Yuan,Yuanjun Che,Yuru Gao,Zhibing Shen,Juntao Zhang

DOI: https://doi.org/10.3390/pr12122724

IF: 3.5

2024-12-03

Processes

Abstract:Aromatics assume a paramount role as indispensable organic chemical feedstock within diverse industrial domains. Simultaneously, the global aromatics market is scarce, particularly with the exorbitant demand for high-value aromatics. Generating aromatics via coal-based methanol and low-carbon hydrocarbon coupling reactions has become a novel green and sustainable development trajectory. In this study, HZSM-5 catalysts featuring different Si/Al ratios and active metal-functionalized modifications were utilized to explore the aromatization effect in light of the Si/Al ratio, types of active components, and metal-loading content in a fixed-bed reactor. The outcomes were that the conversion ratios for methanol and n-pentane attained 99.9% and 83.1%, respectively. Remarkably, an oil phase yield of 32.1% was accomplished, along with an aromatic content of approximately 74.2%, while xylene selectivity reached approximately 37.6% for the 1.0%-ZnO/ZSM-5 (50) catalyst. Ultimately, a reaction mechanism for the coupling of methanol and n-pentane to yield aromatics using a 1.0%-ZnO/ZSM-5(50) catalyst is postulated.

engineering, chemical
ZnZrOx integrated with chain-like nanocrystal HZSM-5 as efficient catalysts for aromatics synthesis from CO2 hydrogenation

Ting Wang,Chengguang Yang,Peng Gao,Shiju Zhou,Shenggang Li,Hui Wang,Yuhan Sun

DOI: https://doi.org/10.1016/j.apcatb.2021.119929

2021-06-01

Abstract:Direct CO2 hydrogenation to high-value chemicals and fuels have received considerable attention. Nevertheless, efficiently producing aromatics with controllable aromatics distribution remains a great challenge. Herein, we report a series of bifunctional catalysts composed of highly active ZnZrOx oxides and nanocrystal HZSM-5 zeolites with the b-axis length ranging from 0.06 to 1.41 μm, which enable direct CO2 hydrogenation into aromatics with high selectivity of 55∼75 %. The CO2 conversion is up to 17.5 % with CO selectivity as low as 23.8 % mainly due to the affluent Brønsted acid sites and a large number of mesopores in HZSM-5 nanocrystal clusters with chain-like morphology. We demonstrate that a proper extension of the b-axis length of HZSM-5 can increase the selectivity of para-xylene (PX) while shortening the length of b-axis favors the formation of tetramethylbenzene (TeMB). The maximum selectivities of PX and TeMB in aromatics can reach to 28.9 % and 74.1 %, respectively.

chemistry, physical,engineering, chemical, environmental
Selective conversion of CO2 and H2 into aromatics

Youming Ni,Zhiyang Chen,Yi Fu,Yong Liu,Wenliang Zhu,Zhongmin Liu

DOI: https://doi.org/10.1038/s41467-018-05880-4

IF: 16.6

2018-08-27

Nature Communications

Abstract:Transformation of greenhouse gas CO2 and renewable H2 into fuels and commodity chemicals is recognized as a promising route to store fluctuating renewable energy. Although several C1 chemicals, olefins, and gasoline have been successfully synthesized by CO2 hydrogenation, selective conversion of CO2 and H2 into aromatics is still challenging due to the high unsaturation degree and complex structures of aromatics. Here we report a composite catalyst of ZnAlOx and H-ZSM-5 which yields high aromatics selectivity (73.9%) with extremely low CH4 selectivity (0.4%) among the carbon products without CO. Methanol and dimethyl ether, which are synthesized by hydrogenation of formate species formed on ZnAlOx surface, are transmitted to H-ZSM-5 and subsequently converted into olefins and finally aromatics. Furthermore, 58.1% p-xylene in xylenes is achieved over the composite catalyst containing Si-H-ZSM-5. ZnAlOx&H-ZSM-5 suggests a promising application in manufacturing aromatics from CO2 and H2.

multidisciplinary sciences
Al-Sn Bimetallic ZSM-5: Acidity Regulation and Excellent Performance in Cracking N-Hexane for Production of Light Olefins

Xiangfei Ding,Youbing Zhu,Ketao Shi,Zhen Xu,Jian Chen,Zengxi Li,Hui Wang

DOI: https://doi.org/10.1016/j.ces.2024.120974

IF: 4.7

2024-01-01

Chemical Engineering Science

Abstract:ZSM-5 zeolite is extensively employed for hydrocarbons cracking to generate light olefins, and its acidity is closely related to the activity and product distribution. In this work, Al-Sn bimetallic ZSM-5 was prepared via a “one-pot” route. Characterizations, including XRD, UV–Vis, XPS, revealed that Sn species were mainly embedded into the zeolite framework as tetrahedral Sn (IV). Moreover, the Sn atoms promoted the formation of Lewis acid sites and reduced the Brønsted acid amount, which effectively inhibited occurrence of side reactions (e.g., aromatization, hydrogen transfer) and improved the selectivity of light olefins in n-hexane cracking. Light olefins yield over HZ5[100,200] (Si/Al = 100, Si/Sn = 200) reached 33.4 % due to the appropriate acid property, in comparison with only 15.4 % for HZ5[50,∞] (Si/Al = 50, Si/Sn=∞) containing system. Through optimization of reaction conditions, better catalytic performance (n-hexane conversion of 91.6 % and light olefins yield of 37.6 %) was obtained over HZ5[100,200] under 575 °C with WHSV of 2 h−1.
Insights into the Key Factor of Zeolite Morphology on the Selective Conversion of Syngas to Light Aromatics over a Cr2O3/ZSM-5 Catalyst

Chang Liu,Junjie Su,Su Liu,Haibo Zhou,Xiaohong Yuan,Yingchun Ye,Yu Wang,Wenqian Jiao,Lin Zhang,Yiqing Lu,Yangdong Wang,Heyong He,Zaiku Xie

DOI: https://doi.org/10.1021/acscatal.0c03658

IF: 12.9

2020-01-01

ACS Catalysis

Abstract:One-step conversion of syngas to aromatics (STA) over an oxide-zeolite bifunctional catalyst is promising as an alternative route for aromatic production. Control of aromatic distribution and enhancement of benzene, toluene, and xylene (BTX) selectivity are still a big challenge. Decoupling the complex reaction network, the relative activity of aromatization and alkylation on ZSM-5 determines the aromatic distribution. Herein, the STA reaction was studied over Cr2O3/ZSM-5 to reveal the influence of the zeolite morphology parameters on aromatic distribution. Using the "substitution ratio of aromatic ring" SC9+/A to reflect the relative rate of alkylation to aromatization, the linear dependence of SC9+/A on the morphology parameter (1/b) of ZSM5 was revealed. The methodology for control of aromatic distribution by altering the crystal size of ZSM-5 along the b-axis is then proposed. By further enhancing the aromatization activity via ion exchange of Zn to ZSM-5, a bifunctional catalyst showing a high BTX space time yield of 2.47 mmol g(-1) h(-1) (on carbon base) with 49.1% BTX fraction is developed.
Non-oxidative conversion of methane to aromatics over modified Mo/HZSM5 catalysts

S Tang,H Chen,J Lin,K.L Tan

DOI: https://doi.org/10.1016/S1566-7367(01)00005-X

IF: 3.51

2001-01-01

Catalysis Communications

Abstract:The effects of HZSM5 Si/Al ratio, cobalt additive and HCl-acidified pretreatment on methane conversion and selectivity to aromatics have been investigated for non-oxidative conversion of methane to aromatics. The HZSM5 (E) with low Si/Al ratio (Si/Al=20) has better methane conversion and benzene selectivity than HZSM5 (D) (Si/Al=55). The synergistic effect is exhibited in 3% Mo-1% Co-HCl/HZSM5 (E) catalyst, on which a high methane conversion of 10.7% can be achieved, in comparison with 5.3% methane conversion on 3% Mo/HZSM5 (E). The catalysts have been characterized by XPS and the reaction mechanism is discussed.
Synthesis of Aromatics from Syngas over FeMnK/SiO2 and HZSM-5 Tandem Catalysts

Yanfei Xu,Jingge Liu,Guangyuan Ma,Jie Wang,Qiong Wang,Jianghui Lin,Hongtao Wang,Chenghua Zhang,Mingyue Ding

DOI: https://doi.org/10.1016/j.mcat.2018.05.019

IF: 4.6

2018-01-01

Molecular Catalysis

Abstract:Direct synthesis of aromatics from syngas was studied by a tandem catalyst of FeMnK/SiO2 with HZSM-5. A decrease in SiO2/Al2O3 ratio of HZSM-5 decreased the crystal sizes of the tandem catalyst, restraining the reduction of iron oxides. Especially, The HZSM-5 with lower SiO2/Al2O3 ratio promoted the formation of strong Bronsted acid sites (BAS). There existed a linear relationship between the BAS amount and aromatics selectivity. Increasing reaction temperature facilitated the formation of aromatics while the increase in both gas space velocity (GHSV) and pressure restrained the selectivity of aromatics. The tandem catalyst of FeMnK/SiO2 with HZSM-5 presented excellent STA performances of 83.80% CO conversion and 57.17% aromatics selectivity under optimizing reaction conditions of 320 degrees C, 2.0 MPa and 4000 h(-1). This work indicated that a combination of Fe-Mn based catalyst with HZSM-5 could promote the direct conversion of syngas to aromatic hydrocarbons.
Direct conversion of syngas into light aromatics over Cu-promoted ZSM-5 with ceria–zirconia solid solution

Sheng Wang,Zhen Huang,Yajun Luo,Jinhao Wang,Yue Fang,Weimin Hua,Yinghong Yue,Hualong Xu,Wei Shen

DOI: https://doi.org/10.1039/d0cy01421d

2020-01-01

Abstract:Syngas conversion with 72.1% selectivity to aromatics and 40.8% CO conversion was achieved over a copper and silica-modified ZSM-5 and ceria–zirconia solid solution bifunctional catalyst.

chemistry, physical
Ceria-Zirconia/Zeolite Bifunctional Catalyst for Highly Selective Conversion of Syngas into Aromatics

Zhen Huang,Sheng Wang,Feng Qin,Liang Huang,Yinghong Yue,Weiming Hua,Minghua Qiao,Heyong He,Wei Shen,Hualong Xu

DOI: https://doi.org/10.1002/cctc.201800911

IF: 4.5

2018-01-01

ChemCatChem

Abstract:Ceria-zirconia solid solutions with tunable surface oxygen vacancy have been used in the direct conversion of syngas into aromatics after coupling with ZSM-5 zeolite. A high selectivity of 83.1% to aromatics has been achieved from syngas with low H-2/CO ratio over Ce0.2Zr0.8O2/ZSM-5 bifunctional catalyst. The surface oxygen vacancy of Ce0.2Zr0.8O2 is supposed to facilitate the formation of oxygenates which act as intermediates for C-C coupling and aromatization on ZSM-5, and thus contribute to the well kinetic matching between C-O activation and C-C coupling over these two components of catalyst. The ceria-zirconia with abundant surface oxygen vacancies and enhanced lattice oxygen mobility intimately mixed with ZSM-5 zeolite with moderate acidity and crystal size play an important role in the catalytic performance.
Hierarchical ZSM-5 Supported CoMn Catalyst for the Production of Middle Distillate from Syngas

Ziwei Wang,Hao Wang,Chengguang Yang,Sheng Wang,Peng Gao,Yuhan Sun

DOI: https://doi.org/10.1021/acs.iecr.1c00374

2021-01-01

Industrial & Engineering Chemistry Research

Abstract:Bifunctional catalysts using hierarchical ZSM-5 zeolite as a support have received more attention for their specific characteristic, which is in favor of producing middle distillate hydrocarbons in Fischer-Tropsch synthesis. The hierarchical structure together with the Bronsted acidity of ZSM-5 zeolites result in the secondary reaction for hydrocracking or isomerization of heavy hydrocarbons. Herein, hierarchical ZSM-5 zeolites with different acidities and mesopore volumes are synthesized by treating zeolites with TPAOH solution. The hierarchical zeolite supported CoMn catalysts are prepared by impregnation method, and all the catalysts are characterized by XRD, BET, XPS, CO/NH3-TPD, and Py-IR. The results show that the 0.5 M TPAOH solution treated ZSM-5 (Z5-0.5M) possesses the largest mesopore volume and a proper Bronsted acidity. In addition, the Z5-0.5M supported CoMn catalyst exhibits a selectivity of jet fuel range (C-8-C-16) as high as 50%, which is much higher than the maximum of 41% predicted by the Anderson-Schulz-Flory model. Moreover, the effect of cobalt loading indicates that the increased cobalt loading leads to the enhancement of CO conversion and the upshift to heavier hydrocarbons.
High‐Efficiency and Long‐life Synergetic Dual‐Oxide/Zeolite Catalyst for Direct Conversion of Syngas into Aromatics

Yue Fang,Haibing Sheng,Zhen Huang,Yinghong Yue,Weiming Hua,Wei Shen,Hualong Xu

DOI: https://doi.org/10.1002/cctc.202200200

IF: 4.5

2022-04-21

ChemCatChem

Abstract:Direct conversion of syngas to aromatics over metal oxide‐zeolite (OX‐ZEO) composite catalysts is a novel route for efficient utilization of carbon resources. To realize a high activity with considerable selectivity to aromatics and stability, the design of synergetic OX‐ZEO catalyst to meet complex kinetics still remains a great challenge. In this work, a synergetic dual‐oxide/zeolite catalyst was developed to tune the coupling between CO and H2 activation through active H species migration, by adopting ZnZrOx oxide with stable single‐layer Zn−O structure for H2 activation and CeZrOx oxide with abundant oxygen vacancies as the CO activation component. The ratio and the proximity of CeZrOx and ZnZrOx is essential for the catalyst activity and stability. The optimal catalyst 1CeZrOx‐2ZnZrOx/Z5@Si shows a superior catalytic performance with 75.6 % aromatics selectivity at a CO conversion as high as 57.5 %. After induction period, the catalyst exhibits excellent stability for 1100 h, keeping the high selectivity above 75 % with an average conversion of 43 %. This work will provide a new perspective to design a high performance and long‐life OX‐ZEO composite catalyst for direct conversion of syngas to high value chemicals. A synergetic dual‐oxide/zeolite catalyst composed of CeZrOx, ZnZrOx metal oxides and silica modified ZSM‐5 is developed for syngas conversion to aromatics, which exhibits long‐life catalytic performance with aromatics selectivity over 75 % at average CO conversion over 43 % during 1100 h of reaction. The interaction manner between CeZrOx and ZnZrOx is of vital importance in enhancing CO activation and improving the stability of the composite catalyst.

chemistry, physical
Controlled reduction of spinel material for highly selective syngas aromatization over bifunctional catalysts

Lu Tang,Jinhui Song,Suyao Liu,Liwei Niu,Yu Zhang,Yiwen Fang,Xingwu Liu

DOI: https://doi.org/10.1016/j.fuel.2024.131072

IF: 7.4

2024-02-01

Fuel

Abstract:Directly converting syngas to aromatics allowed fossil fuel and biomass to provide high-value chemicals. Combining MnFe 2 O 4 spinel material with ZSM-5 zeolite made obtaining a highly selective and stable bifunctional catalyst possible to overcome the present challenge in severe operating conditions and low aromatics content in liquid products. The precisely controlled catalyst exhibited an aromatics selectivity of 63.1 % at CO conversion of 38.3 %, leading to the content of aromatics in C 5 + being higher than 95 %, ensuring that most liquid products are aromatic hydrocarbon (dominated by C 6 ∼ C 12 aromatics), which were significant for the separation and practical application in the syngas conversion process. Characterizations provided evidence of the partially reduced spinel material forming the tiny Fe 5 C 2 particles as main active sites in CO conversion, and the formed olefins were further transformed into aromatics on acid sites of ZSM-5 zeolites. The results fully proved that the precise control of the content and proximity of each component was of great significance for the catalytic performance. Benefiting from the stable structure and potassium promoter, the reduction degree of the spinel material was controllably altered, achieving a significant improvement in aromatics selectivity. Moreover, the long-term stable reaction performance of the optimal catalyst indicated excellent application prospects for selectively converting syngas to aromatics. Thus, this work provided an idea to realize the aromatic production from syngas conversion by precisely controlling the exposure of the active centers.

energy & fuels,engineering, chemical

Enhanced Production of Aromatics from Syngas over CoMnAl Oxides Combined with B-Axis Thickness Tailored HZSM-5

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Enhancing Low-Temperature Methane Conversion on Zn/ZSM-5 in the Presence of Methanol by Regulating the Methanol-to-aromatics Reaction Pathway

Effect of Metal on the Methanol to Aromatics Conversion over Modified ZSM-5 in the Presence of Carbon Dioxide

Enhanced Aromatic Selectivity by the Sheet-Like ZSM-5 in Syngas Conversion

Selective Conversion of Syngas to Aromatics over Metal Oxide/hzsm-5 Catalyst by Matching the Activity Between CO Hydrogenation and Aromatization

Bifunctional Catalysts with Versatile Zeolites Enable Unprecedented Para-Xylene Productivity for Syngas Conversion under Mild Conditions

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

Two-way Desorption Coupling to Enhance Syngas to Aromatics by MnO/H-ZSM-5

Utilization of Metal-Functionalized ZSM-5 for Methanol and Low-Carbon Hydrocarbon Coupling Aromatization

ZnZrOx integrated with chain-like nanocrystal HZSM-5 as efficient catalysts for aromatics synthesis from CO2 hydrogenation

Selective conversion of CO2 and H2 into aromatics

Al-Sn Bimetallic ZSM-5: Acidity Regulation and Excellent Performance in Cracking N-Hexane for Production of Light Olefins

Insights into the Key Factor of Zeolite Morphology on the Selective Conversion of Syngas to Light Aromatics over a Cr2O3/ZSM-5 Catalyst

Non-oxidative conversion of methane to aromatics over modified Mo/HZSM5 catalysts

Synthesis of Aromatics from Syngas over FeMnK/SiO2 and HZSM-5 Tandem Catalysts

Direct conversion of syngas into light aromatics over Cu-promoted ZSM-5 with ceria–zirconia solid solution

Ceria-Zirconia/Zeolite Bifunctional Catalyst for Highly Selective Conversion of Syngas into Aromatics

Hierarchical ZSM-5 Supported CoMn Catalyst for the Production of Middle Distillate from Syngas

High‐Efficiency and Long‐life Synergetic Dual‐Oxide/Zeolite Catalyst for Direct Conversion of Syngas into Aromatics

Controlled reduction of spinel material for highly selective syngas aromatization over bifunctional catalysts