Abstract:Perovskite light-emitting diodes (PeLEDs) exhibit high external quantum efficiencies (EQEs), emerging as a nextgeneration lighting and display technology. Nevertheless, they suffer from severe efficiency roll-off at high luminance, particularly in the case of blue and green emissions, which is one of the major bottlenecks in their industrial applications. Here, we attack this problem using a rare-earth metal, Yb, as cathode interface layer (CIL) for green PeLEDs. By adopting a new device configuration of ITO/TFB/FA-based quasi-2D perovskite/TPBi/Yb/Ag, we achieved a peak current efficiency (CE) of 22.3 cd/A with a corresponding EQE of 5.28% and a high maximum luminance of 19 160 cd/m(2). Importantly, the maximum CE of 22.0 cd/A at 2000 cd/m(2) slightly decreased to 16.8 cd/A at 5000 cd/m(2) and maintained a still-decent value of 12.0 cd/A at a high luminance of 10 000 cd/m(2), exhibiting a remarkably low efficiency roll-off. Our Yb-incorporated devices significantly outperformed the PeLEDs containing conventional CILs, including Mg and Liq, in terms of peak efficiency, efficiency roll-off, and operational lifetime. We attribute this encouraging performance to barrier-free, efficient electron injection enabled by the low work function of Yb (2.6 eV), which led to a high electron current, nearly approaching the hole current in hole-dominant PeLEDs, as confirmed by the singlecarrier device measurements. In addition, we also present Yb-incorporated PeLEDs containing Cs-based quasi-2D perovskite as the emissive layer, which displayed an impressive CE of 51.3 cd/A with a corresponding EQE of 16.4% and a maximum luminance of 14 240 cd/m(2), and still demonstrated a reduced efficiency roll-off comparing to that of the Liq-based equivalent. These results unveil the inspiring prospects of Yb as an efficient CIL for PeLEDs toward high efficiency with curtailed roll-off.

High-Performance All-Inorganic Architecture Perovskite Light-Emitting Diodes Based on Tens-of-Nanometers-Sized CsPbBr3 Emitters in a Carrier-Confined Heterostructure

High-Performance All-Inorganic Architecture Perovskite Light-Emitting Diodes Based on Tens-of-Nanometers-Sized CsPbBr 3 Emitters in a Carrier-Confined Heterostructure

Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Modulated Crystallization and Carrier Transport Properties for Green Perovskite Light-Emitting Diodes via Thermally Activated Delayed Fluorescent-Modified Hole Transport Layers

Perovskite Light‐Emitting Diodes with an External Quantum Efficiency Exceeding 30%

Perovskite Light‐Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual‐Additive Strategy for Defect Passivation and Nanostructure Regulation

Ions-induced Assembly of Perovskite Nanocomposites for Highly Efficient Light-Emitting Diodes with EQE Exceeding 30

Efficient Perovskite Nanograin Light‐Emitting Diodes in Green‐to‐Blue Gamut with co‐Additive Engineering

Ultrabright and Efficient Green Perovskite Light-Emitting Diodes Enabled by Well-Crystallized Dense CsPbBr3 Nanocubes

Green perovskite light-emitting diodes with simultaneous high luminance and quantum efficiency through charge injection engineering

High-performance large-area quasi-2D perovskite light-emitting diodes

Boosting Efficiency and Curtailing the Efficiency Roll-Off in Green Perovskite Light-Emitting Diodes Via Incorporating Ytterbium As Cathode Interface Layer.

Interfacial Energy-Level Alignment for High-Performance All-Inorganic Perovskite CsPbBr 3 Quantum Dot-Based Inverted Light-Emitting Diodes.

High-efficiency perovskite-organic blend light-emitting diodes featuring self-assembled monolayers as hole-injecting interlayers

Efficient Inorganic Perovskite Light-Emitting Diodes by Inducing Grain Arrangement via a Multifunctional Interface

Highly Efficient Visible Colloidal Lead-Halide Perovskite Nanocrystal Light-Emitting Diodes

Formation of Distributed Local Heterojunction to Enhance NIR Emission Due to the Effective Carrier Transfer

Modulating low-dimensional domains of self-assembling quasi-2D perovskites for efficient and spectra-stable blue light-emitting diodes

Color-Stable and High-Efficiency Blue Perovskite Nanocrystal Light-Emitting Diodes via Monovalent Copper Ion Lowering Lead Defects

Vacuum-deposited perovskite CsPbBr3 thin-films for temperature-stable Si based pure-green all-inorganic light-emitting diodes

Efficient All-Inorganic Perovskite Light-Emitting Diodes Enabled by Simultaneous Growth Regulation and Defect Passivation