Abstract:Zirconium phosphate (ZrP) has recently been demonstrated as an excellent sorbent for heavy metals due to its high selectivity, high thermal stability, and absolute insolubility in water. However, it cannot be readily adopted in fixed beds or any other flowthrough system due to the excessive pressure drop and poor mechanical strength resulting from its fine submicrometer particle sizes. In the present study a hybrid sorbent, i.e., polymer-supported ZrP, was prepared by dispersing ZrP within a strongly acidic cation exchanger D-001 and used for enhanced lead removal from contaminated waters. D-001 was selected as a host material for sorbent preparation mainly because of the Donnan membrane effect resulting from the nondiffusible negatively charged sulfonic acid group on the exchanger surface, which would enhance permeation of the targeted metal ions. The hybrid sorbent (hereafter denoted ZrP-001) was characterized using a nitrogen adsorption technique, scanning electron microscope (SEM), and X-ray diffraction (XRD). Lead sorption onto ZrP-001 was found to be pH dependent due to the ion-exchange mechanism, and its sorption kinetics onto ZrP-001 followed the pseudo-first-order model. Compared to D-001, ZrP-001 exhibited more favorable lead sorption particularly in terms of high selectivity, as indicated by its substantially larger distribution coefficients when other competing cations Na+, Ca2+, and Mg2+ coexisted at a high level in solution. Fixed-bed column runs showed that lead sorption on ZrP-001 resulted in a conspicuous decrease of this toxic metal from 40 mg/L to below 0.05 mg/L. By comparison with D-001 and ZrP-CP (ZrP dispersion within a neutrally charged polymer CP), enhanced removal efficiency of ZrP-001 resulted from the Donnan membrane effect of the host material D-001. Moreover, its feasible regeneration by diluted acid solution and negligible ZrP loss during operation also helps ZrP-001 to be a potential candidate for lead removal from water. Thus, all the results suggested that ZrP-001 offers excellent potential for lead removal from contaminated water.

Improved Pb(II) Removal by D001 Resin with a Facile Nanoscale Α-Feooh Modification

A facile modification of cation exchange resin by nano-sized goethite for enhanced Cr(VI) removal from water

Highly efficient removal of heavy metals by polymer-supported nanosized hydrated Fe(III) oxides: behavior and XPS study.

Fabrication Of A New Hydrous Zr(Iv) Oxide-Based Nanocomposite For Enhanced Pb(Ii) And Cd(Ii) Removal From Waters

Pb(Ii) Removal from Water Using Fe-Coated Bamboo Charcoal with the Assistance of Microwaves

Highly efficient Pb(II) and Cu(II) removal using hollow Fe3O4@PDA nanoparticles with excellent application capability and reusability

Fabrication of polymer-supported nanosized hydrous manganese dioxide (HMO) for enhanced lead removal from waters.

A Novel Composite of SiO2 Decorated with Nano Ferrous Oxalate (SDNF) for Efficient and Highly Selective Removal of Pb2+ from Aqueous Solutions.

Nanosized Yolk-Shell Fe3O4@Zr(OH)x Spheres for Efficient Removal of Pb(II) from Aqueous Solution.

Removal of Pb(ii) and Cr(vi) from Aqueous Solutions Using the Prepared Porous Adsorbent-Supported Fe/Ni Nanoparticles

Zeolite-based absorbent: Polyacrylic acid loading for enhanced ferric(III) removal from aqueous solution

A Novel Oxalated Zero-Valent Iron Nanoparticle for Pb(II) Removal from Aqueous Solution: Performance and Synergistic Mechanisms

Impregnating Titanium Phosphate Nanoparticles Onto a Porous Cation Exchanger for Enhanced Lead Removal from Waters.

Efficient Pb(II) removal from contaminated soils by recyclable, robust lignosulfonate/polyacrylamide double-network hydrogels embedded with Fe2O3 via one-pot synthesis

Enhanced selective removal of lead ions using a functionalized PAMAM@UiO-66-NH2 nanocomposite: Experiment and mechanism

Removal of Pb(II) from water using nanoscale SBA-15

Highly Effective Removal of Heavy Metals by Polymer-Based Zirconium Phosphate: A Case Study of Lead Ion

Metastable Nano-Zirconium Phosphate Inside Gel-Type Ion Exchanger for Enhanced Removal of Heavy Metals.

Removal of Pb(II) from Aqueous Solution Using Dithiocarbamate Modified Chitosan Beads with Pb(II) As Imprinted Ions

A New Porous Chelating Fiber: Preparation, Characterization, and Adsorption Behavior of Pb(Ii)

Radix Astragali residue-derived porous amino-laced double-network hydrogel for efficient Pb(II) removal: Performance and modeling