Using Nano-Attapulgite Clay Compounded Hydrophilic Urethane Foams (at/hufs) As Biofilm Support Enhances Oil-Refinery Wastewater Treatment in a Biofilm Membrane Bioreactor.
Yiming Jiang,Aman Khan,Haiying Huang,Yanrong Tian,Xuan Yu,Qiang Xu,Lichao Mou,Jianguo Lv,Pengyun Zhang,Pu Liu,Li Deng,Xiangkai Li
DOI: https://doi.org/10.1016/j.scitotenv.2018.07.149
IF: 9.8
2018-01-01
The Science of The Total Environment
Abstract:Petroleum refinery wastewater (PRW) treatments based on biofilm membrane bioreactor (BF-MBR) technology is an ideal approach and biofilm supporting material is a critical factor. In this study, BF-MBR with nano-attapulgite clay compounded hydrophilic urethane foams (AT/HUFs) as a biofilm support was used to treat PRW with a hydraulic retention time of 5 h. The removal rate of 500 mg/L chemical oxygen demand (COD), 15 mg/L NH4+ and 180 NTU of turbidity were 99.73%, 97.48% and 99.99%, which were 23%, 20%, and 6% higher than in the control bioreactor, respectively. These results were comparatively higher than that observed for the sequencing batch reactor (SBR). The death rate of the Spirodela polyrrhiza (L.) irrigated with BF-MBR-treated water was 4.44%, which was similar to that of the plants irrigated with tap water (3.33%) and SBR-treated water (5.56%), but significantly lower than that irrigated with raw water (84.44%). The counts demonstrated by qPCR for total bacteria, denitrifiers, nitrite oxidizing bacteria, ammonia oxidizing bacteria, and ammonia-oxidizing archaea were also higher in BF-MBR than those obtained by SBR. Moreover, the results of 16 s rRNA sequencing have demonstrated that the wastewater remediation microbes were enriched in AT/HUFs, e.g., Acidovorax can degrade polycyclic aromatic hydrocarbons, and Sulfuritalea is an efficient nitrite degrader. In summary, BF-MBR using AT/HUF as a biofilm support improves microbiome of the actived sludge and is reliable for oil-refinery wastewater treatment.