Abstract:Introduction: Sutures or tacks are commonly used to secure a mesh in intraperitoneal onlay mesh (IPOM) hernia repair, but such penetrating fixations can cause local damage, that can be associated with pain. The use of an adhesive could be an alternative to reduce complications. However, a risk associated with this approach has been identified, particularly when the defect cannot be closed. A mesh glued to the peritoneum only might not provide as much mechanical reinforcement to the abdominal wall (AW) as a mesh anchored to the myofascial structure with penetrating fixations, which could lead to an increased recurrence rate. Additionally, the high elasticity of the peritoneum may increase mesh bulging. Leveraging an ex vivo approach, the objective of this study was to investigate the impact of mesh fixation using glue versus barbed sutures, on its biomechanical response for IPOM surgery. Methods: An experimental method was developed using ex vivo porcine abdominal wall samples (n = 12). A 4-cm centered circular defect was created by dissecting the skin and the subcutaneous tissue and removing muscle and extraperitoneal fat, while keeping the peritoneum intact. A 14-cm diameter mesh was secured (Dermabond™ cyanoacrylate adhesive or V-Loc™ barbed sutures) to the AW. The mesh was placed on the peritoneum to remain consistent with the IPOM placement. The sample was then subjected to some inflation tests to simulate increased levels of intra-abdominal pressure (IAP) representing daily activities. For each test, mesh bulging into the defect was assessed as a function of the pressure using Digital Image Correlation (DIC) analysis. Results: Mesh bulging was studied for 2 configurations: suture fixation and glue. Glued meshes exhibited significantly higher bulging values than when sutured with a significant difference (p = 0.013) observed at 252 mmHg and a certain trend for statistical difference (p < 0.1) for stair climbing or coughing activities. Additionally, the stiffness of the repair was also significantly higher when the mesh was sutured compared to when it was glued to the peritoneum (p < 0.05). Conclusion: This study demonstrated that a mesh glued to the peritoneum exhibited higher bulging and a behavior of the repair less stiff compared to when it was sutured to the myofascial structure of the AW, particularly for high intra-abdominal pressures. However, the impact of these differences remains to be evaluated over time. Further preclinical investigations are needed to quantify their impact post-operatively.

P024 BIOMECHANICAL INFLUENCES TO BE CONSIDERED FOR A DURABLE INCISIONAL HERNIA REPAIR

Biomechanical Influences on Mesh-Related Complications in Incisional Hernia Repair

The Grip Concept of Incisional Hernia Repair—Dynamic Bench Test, CT Abdomen With Valsalva and 1-Year Clinical Results

Biomechanical causes for failure of the Physiomesh/Securestrap system

A combined experimental and numerical approach to evaluate hernia mesh biomechanical stability in situ

Physical structure and mechanical properties of knitted hernia mesh materials: A review

Study of the biomechanical response of a prosthetic mesh secured with penetrating and non-penetrating fixations in IPOM ventral hernia repair

Biomechanical stability of hernia-damaged abdominal walls

HEDI: First-Time Clinical Application and Results of a Biomechanical Evaluation and Visualisation Tool for Incisional Hernia Repair

Are Surgeons Going to Be Left Holding the Bag? Incisional Hernia Repair and Intra-Peritoneal Non-Absorbable Mesh Implant Complications

Functional and morphological evaluation of different polypropylene-mesh modifications for abdominal wall repair

Abdominal wall hernia repair: from prosthetic meshes to smart materials

Hernia Mesh with Biomechanical and Mesh–Tissue Interface Dual Compliance for Scarless Abdominal Wall Reconstruction

Endoscopic and histological evaluations of a newly designed inguinal hernia mesh implant: Experimental studies on porcine animal model and human cadaver

Safety and tissue remodeling assay of small intestinal submucosa meshes using a modified porcine surgical hernia model

[Hundred years development and future prospect of the material science for hernia]

Computational analysis of electrical stimulation to promote tissue healing for hernia repair at varying mesh placement planes

Standardized suturing can prevent slackening or bursting suture lines in midline abdominal incisions and defects

Two Cases about Mesh Adhesion to Intra-Abdominal Cavity Tissue after Using Mesh to Repair an Incisional Hernia

Systematic review of the stage of innovation of biological mesh for complex or contaminated abdominal wall closure

Platelet-Rich Therapies in Hernia Repair: A Comprehensive Review of the Impact of Platelet Concentrates on Mesh Integration in Hernia Management