Abstract:Developing efficient O2 electrocatalyst is crucial for lithium-oxygen (Li-O2) batteries (LOBs). Among various catalysts, perovskite oxides have exhibited diverse catalytic activity owing to their low synthetic cost, tunable constitutions, flexible structures and excellent electrochemical stability. In this research, LaNi0.5Fe0.5O3 perovskites (LNFO) were synthesized via a classical sol–gel route combined with succedent calcination treatment. The ORR and OER tests indicate that the catalytic activity of LNFO calcined at 600 (LNFO-1) and 800℃ (LNFO-3) is superior to that of 700 (LNFO-2) and 900℃ (LNFO-4). To determine which sample is more suitable as a catalyst for LOBs, the LOBs with LNFO-1 and LNFO-3 electrodes were assembled. The LNFO-1 cathode shows discharge capacity of 1.7686 mAh under the current density of 100 mA g−1, which is higher than that with LNFO-3 cathode. The initial discharge–charge profiles of LOBs with LNFO-1 and LNFO-3 electrodes under a cutoff capacity of 1 mAh at 100 mA g−1 indicates that a lower overpotential could gained from LNFO-1 electrode. Meanwhile, 233 and 93 cycles can be realized under capacity limit of 0.15 and 0.315 mAh, respectively, at the current density of 100 mA g−1. The results demonstrate a lower overpotential, and longer circularity can be implemented in the LOB with LNFO-1 cathode, which can be put down to the larger specific surface area, and more presence of Ni3+ and Fe4+ in LNFO-1. Therefore, our work confirmed that the mesoporous LNFO-1 is a promising electrocatalyst for LOBs.

Ordered Porous Mn- Co Spinel Oxide (comn 2 O 4 ) with Vacancies Modulation As Efficient Electrocatalyst for Li- O 2 Battery

Ordered porous Mn - Co spinel oxide (CoMn2O4) with vacancies modulation as efficient electrocatalyst for Li - O2 battery

Perovskite Structure LaNi0.5Fe0.5O3 Electrocatalyst for Rechargeable Li-O2 Batteries

2D Co-doped MnCr2O4 nanosheets as efficient bifunctional cathode materials for long-life Li–O2 batteries

Tailoring Cationic Cobalt Vacancies in Molybdenum-Cobalt Selenide Derived from POM@ZIF-67 for Enhanced Electrocatalysis in Lithium-Oxygen Batteries

Unique intermediate adsorption enabled by anion vacancies in metal sulfide embedded MXene nanosheets overcoming kinetic barriers of oxygen electrode reactions in lithium-oxygen batteries

Novel and highly efficient catalyst for Li–O2 battery: Porous LaCo0.6Ni0.4O3 nanofibers decorated with ultrafine Co3O4 nanoparticles

MOF-Derived Mn2 O3 Nanocage with Oxygen Vacancies as Efficient Cathode Catalysts for Li-O2 Batteries

The Surface Electronic Structure Reconstruction of Co 2.85 Mn 0.15 O 4 with High Active Sites for High-Efficient Lithium–Oxygen Batteries

Constructed Mott-Schottky Heterostructure Catalyst to Trigger Interface Disturbance and Manipulate Redox Kinetics in Li-O2 Battery

Synergistic dual atomic sites with localized electronic modulation enable high-performance lithium–oxygen batteries

Perovskite LaCoxMn1-xO3-σ with Tunable Defect and Surface Structures As Cathode Catalysts for Li-O2 Batteries.

Tunable Cationic Vacancies of Cobalt Oxides for Efficient Electrocatalysis in Li–O 2 Batteries

Porous Mn2O3 Cathode for Highly Durable Li-CO2 Batteries

Optimized Orbital Occupancy of Transition Metal in Spinel Ni-Co Oxides with Heteroatom Doping for Aprotic Li-O2 Battery

Interfacial electronic structure design of MXene-based electrocatalyst via vacancy modulation for lithium-oxygen battery

Enhancing the Bifunctional Catalytic Performance of Porous La0.9Mn0.6Ni0.4O3- Nanofibers for Li-O2 Batteries Through Exsolution of Ni Nanoparticles

Spinel MnCo2O4 nanospheres as an effective cathode electrocatalyst for rechargeable lithium–oxygen batteries

Towards high performance lithium-oxygen batteries: Co3O4-NiO heterostructure induced preferential growth of ultrathin Li2O2 film

Understanding the Dual-phase Synergy Mechanism in Mn2O3-Mn3O4 Catalyst for Efficient Li-CO2 Batteries.

Phosphorus Vacancies and Heterojunction Interface as Effective Lithium‐Peroxide Promoter for Long‐Cycle Life Lithium–Oxygen Batteries