Abstract:Fractured crystalline rocks have been chosen or are under consideration by several countries as host rock formations for deep geological repositories for spent nuclear fuel. In such geological formations, flow and solute transport are mostly controlled by a network of connected natural fractures, each of them being characterised by internal heterogeneity, also denoted as roughness. Fractures are, in turn, subject to variable load caused by various factors, such as the presence of thick ice sheets formed during glaciation periods. Understanding how coupled hydro-mechanical (HM) processes affect flow and transport at the scale of a single natural fracture is crucial for a robust parameterisation of large-scale discrete fracture network models, which are not only used for nuclear waste disposal applications but are also of interest to problems related to geothermics, oil and gas production or groundwater remediation. In this work, we analyse and model an HM experiment carried out in a single natural fracture and use the results of both, the experimental and the modelling work, to get insights into fundamental questions such as the applicability of local cubic law or the effect of normal load on channeling. The initial fracture aperture was obtained from laser scanning of the two fracture surfaces and an equivalent initial aperture was then defined by moving the two fracture surfaces together and comparing the results obtained using a Navier–Stokes based computational fluid dynamics (CFD) model with the experimental flowrate obtained for unloaded conditions. The mechanical effect of the different loading stages was simulated using a high-resolution contact model. The different computed fracture apertures were then used to run groundwater flow simulations using a modified Reynolds equation. The results show that, without correction, local cubic law largely overestimates flowrates. Instead, we show that by explicitly acknowledging the difference between the mechanical aperture and the hydraulic aperture and setting the latter equal to 1/5 of the former, cubic law provides a very reasonable approximation of the experimental flowrates over the entire loading cycle. A positive correlation between fluid flow channeling and normal load is also found.

Seepage Disturbance Mechanism and Interface Force of Cylindrical Barrier in Fracture

Study on the Geometric Characteristics Effect of Contact Area on Fracture Seepage

Explore the Influence of Fracture Void Space Geometry on Seepage: the Effect of Cross-Sectional Area and the Blockage of Contact Area

Influence of roughness of rock fractureon seepage characteristics

<b>Study on the influence of geometric characteristics of contact area on fracture seepage</b>

Effect of Contact Area on Deflection Flow Behavior in a Bifurcated Fracture

Seepage characteristics of a single fracture based on lattice Boltzmann method

Mesoscopic Deformation of a Hydraulic and Mechanical Aperture of a Single Fracture under Normal Stress

Study on the seepage mechanisms of rock with bifurcation fractures under confining pressure

Influence of contact characteristics on nonlinear flow and eddy development in three-dimensional fractures under normal stress

A simulation study on stress-seepage characteristics of 3D rough single fracture based on fluid-structure interaction

Mesoscopic Study of Seepage Characteristics with Shear Displacement in a Single Fracture

Influence of Single Fracture Inclination on Fault

Effect of shear-induced contact area and aperture variations on nonlinear flow behaviors in fractal rock fractures

Influence of Single Fracture Inclination on Fault Activation

Experimental and numerical analysis of flow through a natural rough fracture subject to normal loading

Simulation and Analysis of the Effect of Roughness Elements on Fluid Flow Through Single Fracture Based on Lattice Boltzmann Method

Fracture Analysis on the Arc-Shaped Interfacial Crack Between a Homogeneous Cylinder and Its Coating

Pore-scale insight into the effect of porous walls on fluid flow in rough-walled fractures

Flow Characteristics in a 3D-Printed Rough Fracture

Evolution and Evaluation of the Non-Darcy Effects for Partially Filled Fractures