Abstract:Fractured crystalline rocks have been chosen or are under consideration by several countries as host rock formations for deep geological repositories for spent nuclear fuel. In such geological formations, flow and solute transport are mostly controlled by a network of connected natural fractures, each of them being characterised by internal heterogeneity, also denoted as roughness. Fractures are, in turn, subject to variable load caused by various factors, such as the presence of thick ice sheets formed during glaciation periods. Understanding how coupled hydro-mechanical (HM) processes affect flow and transport at the scale of a single natural fracture is crucial for a robust parameterisation of large-scale discrete fracture network models, which are not only used for nuclear waste disposal applications but are also of interest to problems related to geothermics, oil and gas production or groundwater remediation. In this work, we analyse and model an HM experiment carried out in a single natural fracture and use the results of both, the experimental and the modelling work, to get insights into fundamental questions such as the applicability of local cubic law or the effect of normal load on channeling. The initial fracture aperture was obtained from laser scanning of the two fracture surfaces and an equivalent initial aperture was then defined by moving the two fracture surfaces together and comparing the results obtained using a Navier–Stokes based computational fluid dynamics (CFD) model with the experimental flowrate obtained for unloaded conditions. The mechanical effect of the different loading stages was simulated using a high-resolution contact model. The different computed fracture apertures were then used to run groundwater flow simulations using a modified Reynolds equation. The results show that, without correction, local cubic law largely overestimates flowrates. Instead, we show that by explicitly acknowledging the difference between the mechanical aperture and the hydraulic aperture and setting the latter equal to 1/5 of the former, cubic law provides a very reasonable approximation of the experimental flowrates over the entire loading cycle. A positive correlation between fluid flow channeling and normal load is also found.

Experimental Study of the Effect of Roughness and Reynolds Number on Fluid Flow in Rough‐walled Single Fractures: a Check of Local Cubic Law

Numerical Simulation Study on Flow in Single Fractures with Different Joint Roughness Coefficient

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Numerical Study on the Mechanism of Fluid Flow Through Single Rough Fractures with Different JRC

Influence of Fracture Roughness and Void Space Morphology on Nonlinear Fluid Flow Through Rock Fractures

Numerical analysis of seepage law for radial fluid flow in a single fracture: Comparison between smooth and rough fractures

Characterization of Flow under Different Geometric Properties and Reynold Numbers in Y-Junction Bifurcated Fractures

Quantitative Estimation of Fluid flow Mechanism in Rock Fracture Taking into Account the Influences of JRC and Reynolds Number

The Effect of Expansion Ratio on the Critical Reynolds Number in Single Fracture Flow with Sudden Expansion

Experimental and numerical analysis of flow through a natural rough fracture subject to normal loading

Experimental Study of the Nonlinear Flow Characteristics of Fluid in 3D Rough-Walled Fractures During Shear Process

Effect of shear-induced contact area and aperture variations on nonlinear flow behaviors in fractal rock fractures

Influence of roughness of rock fractureon seepage characteristics

Modified Governing Equation and Numerical Simulation of Seepage Flow in a Single Fracture with Three-Dimensional Roughness

Simulation on the Water Flow Affected by the Shape and Density of Roughness Elements in a Single Rough Fracture

The Role of Fracture Surface Roughness in Macroscopic Fluid Flow and Heat Transfer in Fractured Rocks

Fluid flow characteristics of cross-fractures with two branch fractures of different roughness controlled by fractal dimension: An experimental study

A Model for Water Flow Through Rock Fractures Based on Friction Factor

Effects of surface roughness and Reynolds number on the solute transport through three-dimensional rough-walled rock fractures under different flow regimes

The Characteristics and Estimation of Flow Through a Single Rough-Walled Fracture

Micro- and Macro-Behaviour of Fluid Flow Through Rock Fractures: an Experimental Study