Abstract:Driven by frequency conversion, the windings of a three-phase permanent magnet synchronous motor (PMSM) contain both odd and even harmonic currents. Due to the motor's pole–slot conductance modulation, the interaction between the magnetic fields generated by these harmonic currents and the permanent magnet field results in harmonic radial vibrations of the motor. This paper analyzes the three-phase currents of the prototype and derives the radial magnetomotive force (MMF) spatiotemporal models for symmetric harmonic currents. By integrating Maxwell's magnetic force formula and vibration response formula, the radial vibration models for symmetric harmonic currents are developed. The characteristics of vibrations caused by odd and even harmonic currents, as well as positive sequence and negative sequence harmonic currents, are analyzed separately. A cyclic sequence, low-frequency vibration suppression control method incorporating multiple harmonic current injections was designed. Experimental results of this method are compared with those obtained using an ideal sinusoidal current. Except for the second harmonic vibration, all other vibrations are significantly suppressed, with a maximum suppression rate of 92.28%. The total vibration level is reduced by 12.7619 dB, and the average torque is reduced by 0.67% with the total harmonic distortion of the current at 2.89%. The experimental results show that the vibration method in this paper has little influence on the average torque of the motor, the current distortion rate is small, and the vibration suppression effect is good.

Zeroth-Mode Vibration Suppression for Surface-Mounted PMSM by Increasing the Axial Spatial Order of Electromagnetic Force

Zeroth-Mode Vibration Suppression for Integral-Slot Surface-Mounted PMSMs by Increasing the Vibration Mode from Zero to Number of Pole Pair

Zeroth-Mode Vibration Suppression through Adjustment on Phases Difference of Concentrated Force Harmonics for PMSMs

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Characterization and Reduction of Zeroth Spatial-Order Radial Force in Permanent Magnet Synchronous Machines

Research on Radial Vibration Model and Low-Frequency Vibration Suppression Method in PMSM by Injecting Multiple Symmetric Harmonic Currents

Vibration and Noise Optimization of Variable-Frequency-Driven SPMSM Used in Compressor Based on Electromagnetic Analysis and Modal Characteristics

Reduction of Low-Frequency Noise and Vibration for Low-Speed High-Torque Permanent Magnet Synchronous Machines

Research on Slot-Frequency and Pole-Frequency Electromagnetic Vibration of Low Harmonic Surface-Mounted PMSM

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Generation Mechanism and Suppression Measure of Electromagnetic Vibration in Permanent Magnet Synchronous Machine: A Review

Reduction of Vibration and Noise in Low Speed Direct-driven PMSMs

Study of Electromagnetic Vibration Suppression for Permanent Magnet Synchronous Motors

Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Filling Force Valley with Interpoles for Pole-Frequency Vibration Reduction in Surface-Mounted PM Synchronous Machines

Analysis of Zeroth-Mode Slot Frequency Vibration of Integer Slot Permanent-Magnet Synchronous Motors.

Analytical modeling of stator vibration for surface mount permanent magnet brushless motors

Comparative Study of Sideband Electromagnetic Force in Internal and External Rotor PMSMs With SVPWM Technique

Vibration Suppression for PMSM Flexible Servo Systems Using Enhanced Two-Mode Shapers