Abstract:As axial locations of two mirrors in a space camera with off-axis Three Mirror Anastigmatic(TMA)optical system are closed,this paper proposes a integrated structure combined primary and tertiary mirrors to improve the precision and stability of the opto-mechanical structure.A highstiffness and ultra-lightweighted integrated support plate was applied as the replacement of separated primary and tertiary mirror support plates to achieve the unification of optical machining,detection and adjustment base lines.The integrated support plate was also a constituent part of the main support frame,so that the entire weight was reduced and the dynamic/static stiffness of the optomechanical structure was enhanced.The interference detection of the space camera with the integrated structure was performed.The results indicate that maximum surface shapes of primary mirror and tertiary mirror are 0.024λ(rms)and 0.013λ(rms),respectively,and both meet optical tolerance requirement.The MIMO(multi-input multi-output)free modal test was performed for an aluminum structure prototype,and the results show that the first mode is 48 Hz,which corresponds to the firstconstrained mode of 114 Hz for the principle prototype and meets the structural stiffness requirement.During ion beam fine optical machining process,the time sharing was used to machine the primary mirror and the tertiary mirror,and the machining efficiency is improved by about 50% for omitting the heat dissipation time.It concludes that the application of integrated structure for primary mirror and tertiary mirror improves the performance and optical machining efficiency of the space camera,and provides a reference for opto-mechanical structure design of high resolution and wide field of view space cameras.

Preliminary Research of the Light-Weighted Secondary Mirror with Passive Supports for the MUltiplexed Survey Telescope

Preliminary Investigation on the Effect of Secondary Mirror Assembly on the Optical Performance for the MUltiplexed Survey Telescope

An Overview of Radial Supporting Ways for Large-Size Movement Mirror: a Case Study of a Large-Aperture Rotating Prism

Conceptual Design of the Optical System of the 6.5m Wide Field Multiplexed Survey Telescope with Excellent Image Quality

Investigation of Optical Distortion Self-Compensation Ability in the MUltiplexed Survey Telescope

The Optimization Design of a Lightweight 2 m SiC Mirror for Ground-Based Telescopes

Topology Optimization-Based Lightweight Primary Mirror Design of a Large-Aperture Space Telescope.

The Study of 700Mm-Diameter Primary Mirror Based on Topology Optimization and Sensitivity Analysis

Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope

Integrated Primary and Tertiary Mirror Components from Common Base Line of Off-Axis TMA Space Camera

Hybrid Optimization Methodology of Variable Densities Mesh Model for the Axial Supporting Design of Wide-Field Survey Telescope

Design and analysis of supporting structure for rectangular mirror

The Optimization of a Convex Aspheric Lightweight SiC Mirror and Its Optical Metrology

Coupled-field analysis and light-weighting design of mirror of space optical systems

The Design Of Support Structure Of Mirror Subassembly Of Space Remote Sensor

Design And Analysis Of Structure Of Large Aperture Three-Mirror Off-Axis Optical System

Research on the Support and Gravitational Deformation of Large Aperture Primary Mirror of Space Telescopes

The optimization of segment's axial support point for large astronomical telescopes

Optomechanical analysis of the mounting performance of large laser transport mirrors

Optimal design of a Φ760 mm lightweight SiC mirror and the flexural mount for a space telescope

THE OPTIMIZATION DESIGN OF 1 METER PRIMARY MIRROR SUPPORT SYSTEM