Abstract:Silicon (Si) has been recommended as one of the most promising candidate for next generation of anode in lithium-ion batteries mainly because of its highest ever known theoretical gravimetric capacity of 3579 mAh g at room temperature. However, the Si experiences a dramatic volume change during the reaction with lithium ions, finally resulting in the damage of the anode structure and fast capacity fading of the battery. The nanostructuring of Si has recently attracted great attention due to its capability to maintain the structural stability. Focusing on promoting the lithium storage properties in terms of gravimetric capacity, rate capability, and cycling stability, diverse exciting Si nanostructures and their hybrids have been designed and exploited. For instance, we have developed a novel Si-C nanohybrid in which Si nanowires dwell in the hollow graphitic tubes, which creates efficient channels for the fast transport of both electrons and lithium ions and provides spaces for the free expansion of Si nanowires during cycling. Impressively, this structural design resulted in remarkable electrochemical performance of 1100 mAh g at 4.2 A g over 1000 cycles. Despite of these improvements, one critical parameter correlating to the practical application of Si has long been neglected. In general, the low tap density of Si in the anodes directly lowers volumetric capacity reflecting volumetric energy density, and increases the use of other inactive additives like binders and carbon black capable of reducing the gravimetric capacity as well. As a result, it is urgently required to design new electrode structure, for example, by engineering both the individual materials unit and the materials ensemble, namely, a nanoscale system engineering strategy. In this report, we propose and develop a novel electrode configuration following this strategy. The wellordered perforated Si nanowires are conformally coated with the graphitic carbon sheets, and interconnected through an underlying layer, thus forming a mechanically robust, free-standing textured silicon@graphitic carbon nanowire array. Such a unique electrode structure has been designed simultaneously at the individual materials unit scale and the materials ensemble scale. Specifically, the perforated NW array were proposed to provide satisfactory void space for the free expansion of Si during lithiation, while the graphitic carbon coating addresses the interfacial instability issue, thus the structural stability can be readily realized. Furthermore, thanks to the nanowire array geometry with only ~10 wt % content of carbon introduced in the electrode, the tap density of Si reaches a significantly high value of ~0.9 g cm. Benefiting from such an integrated design protocol, the electrode exhibits high volumetric capacity, competing rate capability, and remarkably stable cycling performance (e.g. 1500 mAh cm after 200 cycles). Coupled with a simple and scalable production protocol, the electrode architecture developed represents a significant advance in developing Si-based electrodes practically applicable to next-generation lithium ion batteries.

Biomimetics‐Inspired Architecture Enables the Strength–Toughness of Ultrahigh‐Loading Silicon Electrode

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes

Bamboo Inspired Silicon Anodes with Ultrahigh Initial Coulombic Efficiency and High Capacity for the Li‐Ion Batteries

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

Improved Adhesion of Cross-Linked Binder and SiO2-coating Enhances Structural and Cyclic Stability of Silicon Electrodes for Lithium-Ion Batteries

Textured Silicon@Graphitic Carbon Nanowire Arrays for Advanced Lithium-Ion Batteries

SiO2‐Enhanced Structural Stability and Strong Adhesion with a New Binder of Konjac Glucomannan Enables Stable Cycling of Silicon Anodes for Lithium‐Ion Batteries

Constructing a Stable Integrated Silicon Electrode with Efficient Lithium Storage Performance through Multidimensional Structural Design

Manipulating charge-transfer kinetics and flow-domain LiF-rich interphase to enable high-performance microsized silicon-silver-carbon composite anode for solid-state batteries

Multilayered Silicon Embedded Porous Carbon/graphene Hybrid Film As a High Performance Anode

Self-swelling derived frameworks with rigidity and flexibility enabling high-reversible silicon anodes

“Nano-Skeleton” Si-SiOx@C Anodes towards Highly Stable Lithium-ion Batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Cross-linking chemistry enables robust conductive polymeric network for high-performance silicon microparticle anodes in lithium-ion batteries

Surface-engineered Mesoporous Silicon Microparticles As High-Coulombic-efficiency Anodes for Lithium-Ion Batteries

Design Of High-Energy-Dissipation, Deformable Binder For High-Areal-Capacity Silicon Anode In Lithium-Ion Batteries

Nanostructure designing and hybridizing of high-capacity silicon-based anode for lithium-ion batteries

Consecutive chemical bonds reconstructing surface structure of silicon anode for high-performance lithium-ion battery

Adaptable silicon-carbon nanocables sandwiched between reduced graphene oxide sheets as lithium ion battery anodes