Abstract:Phase change materials (PCMs) with high latent heat are becoming a promising method for application in battery modules, but they are still limited by some drawbacks, such as low thermal conductivity and easy leakage. This article uses a high-temperature melt blending method to prepare a high thermal conductivity composite phase change material (CPCM) based on a three-dimensional metal organic network, and uses it in a battery thermal management system (BTMS). Paraffin wax (PA) with high latent heat value is used as PCM, hydrogel like (HGL) and styrene-butadiene-styrene block copolymer (SBS) are used as support materials, and expanded graphite (EG) is used as heat conduction additive. Experimental studies have shown that the prepared HGL can not only serve as a support material for CPCM to prevent PCM leakage, but also as a thermal conductivity additive to improve the thermal conductivity of CPCM due to the presence of metal ions. In addition, this article also prepared a series of CPCMs by adjusting the ratio of HGL to SBS. It was found that when the ratio of HGL to SBS was 1:1, the prepared PSHE2 had a thermal conductivity of 1.64 W/m∙K, which was 4.97 times that of pure PA. The corresponding phase transition enthalpy value could also be maintained as high as 185.4 J/g, and a mass retention rate of over 98.68% could be maintained under heating conditions of 70 ℃ for 1 hour. In addition, the highest temperature and maximum temperature difference of the battery module using PSHE2 are significantly lower than the other two battery modules. The highest temperature and maximum temperature difference can be controlled below 45.6 ℃ and 3.5 ℃, respectively, indicating that the BTMS using PSHE2 has better temperature control performance and temperature consistency, which can ensure the long-term cycling stability of the battery. Therefore, this work can provide a promising multifunctional composite PCM method for battery thermal management and other energy storage fields.

Thermally Conductive Enhanced Flexible Composite Phase Change Materials for Thermal Management

Thermally-induced flexible composite phase change material with enhanced thermal conductivity

Flexible and Highly Thermally Conductive Phase Change Materials with Hierarchical Dual Network for Thermal Management

Form-stable flexible composite multi-phase change material with high latent heat and enhanced thermal conductivity for thermal management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Experimental study on novel composite phase change materials with room-temperature flexibility and high-temperature shape stability in a battery thermal management system

Flexible phase change composite based on loading paraffin into cross-linked CNT/SBS network for thermal management and thermal storage

Thermal Sensitive Flexible Phase Change Materials with High Thermal Conductivity for Thermal Energy Storage

Introducing a Flexible Insulation Network to the Expanded Graphite-Based Composite Phase Change Material to Enhance Dielectric and Mechanical Properties for Battery Thermal Management

A Thermally Induced Flexible Composite Phase Change Material with Boron Nitride Nanosheets/carbon Nanotubes Modified Skeleton for Battery Thermal Management

Lightweight and Flexible Phase Change Materials for Thermal Management with Integrated Rapid Heating and Cooling Functions

Shape-stabilized phase change material based on MOF-derived oriented carbon nanotubes for thermal management of lithium-ion battery

Flexibility, Malleability, and High Mechanical Strength Phase Change Composite Films for Solar-Thermal and Electro-Thermal Energy Storage

A novel stable and flexible composite phase change materials for battery thermal management

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Flexible composite phase change material with improved hydrophobicity and thermal conductivity characters for thermal management

A Novel Room-Temperature Flexible Phase Change Material for Solar Energy Photothermal Conversion and Battery Thermal Management

High Thermally Conductive Shape-Stabilized Phase Change Composites with Dual-Aligned Carbon Nanofiber Scaffolds

Multifunctional flexible composite phase change material with high anti-leakage and thermal conductivity performances for battery thermal management

Highly Thermal Conductive and Antileakage Composite Phase Change Materials Based on 3d Metal-Organic Networks for Battery Thermal Management

Thermal Conductive Enhanced Phase Change Composites with High Latent-Heat for Constant Temperature Thermal Management