Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

Microscale Stray Grains Formation in Single-Crystal Turbine Blades of Ni-based Superalloys

The Stray Grains from Fragments in the Rejoined Platforms of Ni-Based Single-Crystal Superalloy

Formation and Evolution of Stray Grains on Remelted Interface in the Seed Crystal During the Directional Solidification of Single-Crystal Superalloys Assisted by Vertical Static Magnetic Field

The Formation Mechanism, Influencing Factors and Processing Control of Stray Grains in Nickel-Based Single Crystal Superalloys

Modeling of Unidirectional Growth in a Single Crystal Turbine Blade Casting

The Microstructure Characteristic and Its Influence on the Stray Grains of Nickel-based Single Crystal Superalloys Prepared by Laser Directed Energy Deposition

Simulation and Experimental Investigation of Grain Structure, Residual Stress,γ′ Phases in Single Crystal Blade

Microscale Simulation of Stray Grain Formation in Investment Cast Turbine Blades

Simulation of stray grain formation in Ni-base single crystal turbine blades fabricated by HRS and LMC techniques

Simulation and Experimental Investigation of a Combined Control Method for Stray Grain During Single Crystal Blade Solidification

Experimental Investigation and Modelling of Microstructure Degradation in a DS Ni-based Superalloy Using a Quantitative Cross-Correlation Analysis Method

Macro and micro numerical simulation of directional solidification of super alloy SX turbine blade

Effect of Directional Solidification Variables on the Microstructures of Single-Crystal Turbine Blades of Nickel-Based Superalloy

Dendrite Growth and Orientation Evolution in the Platform of Simplified Turbine Blade for Nickel-Based Single Crystal Superalloys

Microstructure Evolution and Dynamic Recrystallization Mechanism Induced by Grinding of Ni-based Single Crystal Superalloy

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Microstructure and Tensile Behavior of Nickel-Based Single Crystal Superalloys with Different Re Contents

Effect of Construction Manner of Mould Cluster on Stray Grain Formation in Dummy Blade of DD6 Superalloy

Multi-Scale Characterization of Stray Grain in the Platform of Nickel Base Single Crystal Turbine Blade

Temperature Evolution and Grain Defect Formation During Single Crystal Solidification of a Blade Cluster

The Microstructural Degradation of Ni-Based Superalloys with Segregation under the Super-Gravity Condition