Abstract:The IC lead frame is an essential component in semiconductor packaging, primarily composed of a nickel (Ni)–copper (Cu) alloy in which Ni is electroplated onto a Cu substrate. In this study, synergistic solvent extraction using a binary extractant containing LIX984N and Cyanex302, followed by two-stage selective stripping using sulfuric acid (H2SO4) and nitric acid (HNO3) as the stripping agent, was employed to separate and recover Cu and Ni from the leachate of an IC lead frame. The results indicated that under the optimal conditions of synergistic solvent extraction with an extraction pH value of 1, an extractant concentration of 0.015 M LIX984N + 0.0375 M Cyanex302, an extraction aqueous/organic (A/O) ratio of 1:1, and an extraction time of 5 min, the extraction efficiencies for Cu and Ni were 99.8% and 1.17%, respectively. The distribution ratios were DCu 999 and DNi 0.012, resulting in a separation factor of 83,250. In addition, the separation factor was much higher than that of using individual extractant of LIX984N (6208.3) or Cyanex302 (22,185.2). Subsequently, under optimal first-stage stripping conditions, using 0.05 M H2SO4 at a stripping organic/aqueous (O/A) ratio of 1:1, and with a stripping time of 3 min, a stripping efficiency of 99.9% for Ni was achieved. Next, under optimal second-stage stripping conditions, using 5 M HNO3 at a stripping O/A ratio of 2:1, and with a striping time of 3 min, a stripping efficiency of 99.9% for Cu was achieved. Finally, sodium hydroxide (NaOH) was added to the respective stripping solutions to precipitate Ni and Cu ions, followed by calcination treatment for the precipitates to obtain NiO and CuO, respectively. The purity of the former was 99.74% and that of the latter was 99.82%. The results demonstrate that synergistic solvent extraction using a binary extractant containing LIX984N and Cyanex302 can almost entirely extract Cu in the leachate of an IC lead frame at a lower extraction pH and a lower extractant concentration, thus reducing the co-extraction of Ni. In addition, less co-extracted Ni in the organic phase can be selectively stripped using dilute H2SO4, thus reducing the co-stripping of Cu. Hence, the effective separation and recovery of Cu and Ni in IC lead frame leachate can be achieved, which contributes to improving the sustainability of natural resources.

Separation of Trace Amount of Nickel from Cobalt Sulphate Solutions Using a Synergistic Solvent Extraction System Consisting of Dinonylnaphthalene Sulfonic Acid (DNNSA) and Decyl 4-Picolinate (4PC)

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Separation of Cobalt and Nickel by Non-Equilibrium Solvent Extraction

Synergistic solvent extraction system of bis(pyridin-2-ylmethyl) dodecan-1-amine and dinonylnaphthalene for enhanced selective extraction of nickel and cobalt

Solvent extraction of Ni and Co from Ni-laterite leach solutions using a new synergistic system consisting of Versatic 10 acid, Mextral 6103H and Aliquat 336 with elemental mass balance for leaching, precipitation, solvent extraction, scrubbing and stripping

Selective Co-Extraction of Critical Metals from Deep Ocean Polymetallic Nodule Leachate and Preparation of Battery-Grade Ni-Co-Mn Solution

Cobalt separation from nickel in sulfate aqueous solution by a new extractant: Di-decylphosphinic acid (DDPA)

Studies On Separation Of Cobalt And Nickel By Non-Equilibrium Solvent Extraction

An Efficient Method for Separation of Ni(II) and Co(II) with Novel Extractant NNPA: Synthesis, Characterization, Extraction Behaviors, Crystal Structures and DFT Computational Studies

Phase Separation in Solvent Extraction of Copper or Nickel from Acidic Solution Using a Sulfonic Acid (HDNNS) and a Carboxylate Ester (4PC)

Separation of cobalt and nickel from chloride leach solution of nickel laterite ore by solvent extraction

Direct Extraction of Ni(II) from Acidic Polymetallic Sulfate Media with a Novel Synergistic Extraction System of DNNSA-MSL211

Separation of Co(II) and Ni(II) from Hydrochloric Acid Leach Liquor by Solvent Extraction and Crystallization

Phase Separation in Solvent Extraction of Cobalt from Acidic Sulfate Solution Using Synergistic Mixture Containing Dinonylnaphthalene Sulfonic Acid and 2-Ethylhexyl 4-Pyridinecarboxylate Ester

Separation of Cobalt and Nickel from Wastewater by P-204 Microemulsion Saponified

Development of a conceptual direct solvent extraction (DSX) route to produce purified concentrated cobalt and nickel solutions representing sulfuric acid leach liquor of laterite

Direct Solvent Extraction of Nickel from Sulfuric Acid Leach Solutions of Low Grade and Complicated Nickel Resources Using A Novel Extractant of HBL110

Separation and Recovery of Copper and Nickel in the Leachate of a Waste IC Lead Frame through Synergistic Solvent Extraction Using a Binary Extractant Containing LIX984N and Cyanex302 Followed by Selective Stripping

Theory of Solvent Extraction Separation of Cobalt and Nickel

Implementation of an innovative hybrid process based on electrodeionization for nickel and cobalt separation from synthetic pregnant leach solution

A Novel Process on Separation of Manganese from Calcium and Magnesium Using Synergistic Solvent Extraction System