Abstract:In this report, a novel type of cupric oxide (CuO) nanoparticles-modified multi-walled carbon nanotubes (MWCNTs) array electrode for sensitive nonenzymatic glucose detection has been fabricated. The morphology of the nanocomposite was characterized by transmission electron microscopy and X-ray diffraction. The electrochemical performance of the CuO/MWCNTs electrode for detection of glucose was investigated by cyclic voltammetry and chronoamperometry. The CuO/MWCNTs electrode showed much higher electrocatalytic activity and lower overvoltage than the bare MWCNTs electrode towards oxidation of glucose. At an applied potential of +0.40V, the CuO/MWCNTs electrode presented a high sensitivity of 2596μAmM−1cm−2 to glucose. In addition, linear range was obtained over a concentration up to 1.2mM with a detection limit of 0.2μM (signal/noise=3). The response time is about 1s with addition of 0.10mM glucose. More importantly, the CuO/MWCNTs electrode is also highly resistant against poisoning by chloride ion, and the interference from the oxidation of common interfering species such as ascorbic acid, dopamine, uric acid and carbohydrate compounds is effectively avoided. In addition, the CuO/MWCNTs electrode was also used to analyze glucose concentration in human serum samples. The CuO/MWCNTs electrode exhibits an enhanced electrocatalytic property, low working potential, high sensitivity, excellent selectivity, good stability, and fast amperometric sensing towards oxidation of glucose, thus is promising for the future development of nonenzymatic glucose sensors.

Enzyme-free Glucose Sensor Based on Electrodeposition of Multi-Walled Carbon Nanotubes and Zn-based Metal Framework-Modified Gold Electrode at Low Potential

A High–performance Non–enzymatic Glucose Sensor Based Au and ZrO2 Nanoparticles Supported on Multi-Walled Carbon Nanotubes

A high–performance non–enzymatic glucose sensor based Au and ZrO 2 nanoparticles supported on multi-walled carbon nanotubes

Enzyme-free glucose sensor based on layer-by-layer electrodeposition of multilayer films of multi-walled carbon nanotubes and Cu-based metal framework modified glassy carbon electrode.

Glucose biosensors based on nano-composites of multi-walled carbon nanotubes and zinc oxide nanorods

NANO-FE AND MWCNTS BASED NON-ENZYMATIC SENSOR FOR DETERMINATION OF GLUCOSE IN SERUUM

ZnO nanoparticle and multiwalled carbon nanotubes for glucose oxidase direct electron transfer and electrocatalytic activity investigation

A Non-Enzymatic Glucose Amperometric Biosensor Based on a Simple One-Step Electrodeposition of Cu Microdendrites Onto Single-Walled Carbon Nanohorn-Modified Electrode

Improved Enzyme Immobilization for Enhanced Bioelectrocatalyticactivity of Glucose Sensor (Chinese)

A Highly Sensitive Non-Enzymatic Glucose Sensor Based on a Simple Two-Step Electrodeposition of Cupric Oxide (cuo) Nanoparticles Onto Multi-Walled Carbon Nanotube Arrays

An Amperometric Non-Enzymatic Glucose Sensor by Electrodepositing Copper Nanocubes Onto Vertically Well-Aligned Multi-Walled Carbon Nanotube Arrays

A Novel Non-Enzymatic Glucose Sensor Based on Cu Nanoparticle Modified Graphene Sheets Electrode

A Non-Enzymatic Glucose Sensor Based On The Composite Of Cubic Cu Nanoparticles And Arc-Synthesized Multi-Walled Carbon Nanotubes

Carbon Nanotube/chitosan/gold Nanoparticles-Based Glucose Biosensor Prepared by a Layer-by-layer Technique

Integrating Cu/CuxO X O Ternary Nanocomposites with Multi-Walled Carbon Nanotubes Enabling a Highperformance Nonenzymatic Amperometric Glucose Sensor

A Non-Enzymatic Glucose Sensor Based on Copper Oxide Nanowires-Singlewall Carbon Nanotubes

Integrating Cu/Cu<sub>x</sub>O ternary nanocomposites with multi-walled carbon nanotubes enabling a high-performance nonenzymatic amperometric glucose sensor

Improved Enzyme Immobilization for Enhanced Bioelectrocatalytic Activity of Choline Sensor

Non-Enzymatic Glucose Sensor Composed of Carbon-Coated Nano-Zinc Oxide

A highly sensitive nonenzymatic glucose sensor based on CuO nanoparticles-modified carbon nanotube electrode.

A novel non-enzymatic glucose sensor based on a Cu-nanoparticle-modified graphene edge nanoelectrode