Abstract:A refined extended alternating convex optimization (REACO) method is presented to synthesize multibeam sparse circular-arc antenna arrays with minimum element spacing control by considering real antenna array structure characteristics. This method consists of the initial step and a few refining steps. At the initial step, an initial array with dense elements distributed on a circular-arc is considered, and its array manifold vector is described by rotating a simulated isolated element pattern (IEP) without considering element mutual coupling. The collective excitation coefficient vector (CECV) and its energy bound are introduced for each element, and consequently, the common element positions for generating desired multibeam patterns can be found by minimizing the number of active CECVs under multiple constraints. This minimization problem is further formulated as performing a sequence of alternating convex optimization (ACO) in which the CECV and an auxiliary weighting vector are alternately chosen as the optimization variables so that the minimum element spacing constraint can be easily dealt with. Once the initial optimization step is finished, a few refining steps are performed in which the element positions and excitations are successively updated in each step by renewing the array manifold vector through rotating the simulated nearby active element patterns (AEPs) of the antenna array obtained at the previous step. In such a way, the mutual coupling can be incorporated into the multibeam sparse array synthesis. An example of synthesizing a sparse circular-arc conformal array with 23 beams covering the space from −63.25° to 63.25° is conducted to validate the effectiveness and advantage of the proposed method.

Enhancing Aperture Efficiency of Single Parabolic Cylindrical Compact Range Based on a Linear Array Excitation Method

A Novel PSO-Based Pattern Synthesis Method for Conformal Array with Dynamic Range Ratio Constraint.

Analytical Beam Forming for Circularly Symmetric Conformal Apertures

Design for Array-Fed Beam-Scanning Reflector Antennas with Maximum Radiated Power Efficiency Based on Near-Field Pattern Synthesis by Support Vector Machine

Synthesis of Multibeam Sparse Circular-Arc Antenna Arrays Employing Refined Extended Alternating Convex Optimization

Ultra-wideband RCS reduction and gain enhancement of patterned-surface-based aperture coupling patch antenna with optimized arrangement method

Combining Pancharatnam-Berry Phase and Spherical Conformal Transmitarray for High-efficiency Beam Focusing

Synthesizing Shaped-Beam Cylindrical Conformal Array Considering Mutual Coupling Using Refined Rotation/Phase Optimization

Circularly Polarized Corporate-Feed Beam-Scanning Array with Low Profile

Synthesizing Circularly Polarized Multi-Beam Planar Dipole Arrays with Sidelobe and Cross-Polarization Control by Two-Step Element Rotation and Phase Optimization

Improving Scanning Performance of Patch Phased Array Antenna by Using a Modified SIW Cavity and Sequential Rotation Technique

A New Concept to Form Arc Cylinders to Parabolic Troughs Using Optimal Forces

Synthesis of Linear and Planar Arrays Via Sequential Convex Optimizations

Defocused Cylindrical Luneburg Lens Antennas with Phased Array Antenna Feed

Antenna Scan Optimization for Space-Based Radar Subject to Reducing Power-Aperture Product

Aperture-Shared Dual-Band High Gain Beam Scanning Antenna Hybridizing Reflection-Mode Fabry Perot Cavity and Wide-Angle Reflectarray

Height Reduced Concave Sector-Cut Spherical Conformal Phased Array Antenna Based on Distributed Aperture Synthesis

Investigation of Array-based Plane Wave Generator for Compact Antenna Test Range Application

High Aperture Efficiency Arced Conformal Array with Phasor Beam Steering Antenna

A Modified Parabolic-Cylindrical Reflectarray Antenna for Wide Beam Scanning Capablility

Efficient Synthesis of Linearly Polarized Shaped Patterns Using Iterative FFT Via Vectorial Least-Square Active Element Pattern Expansion