Height Reduced Concave Sector-Cut Spherical Conformal Phased Array Antenna Based on Distributed Aperture Synthesis

Hong Sheng Lin,Yu Jian Cheng,Ya Fei Wu,Yong Fan
DOI: https://doi.org/10.1109/tap.2021.3070676
IF: 5.7
2021-10-01
IEEE Transactions on Antennas and Propagation
Abstract:The conventional spherical conformal phased-array antenna (SPAA) has a wide beam coverage but suffers from a high profile due to its spherical conformal carrier. In this article, a low-profile conformal array antenna is modified from the conventional SPAA, which can be called the concave sector-cut spherical phased-array antenna (CSSPAA). A distributed aperture synthesis is employed to guarantee that the performance of the CSSPAA is close to that of the SPAA after reducing its height as much as possible. The CSSPAA's height and the element's half-power beamwidth (HPBW) are properly designed to minimize the blockage influence due to the special topology of the CSSPAA. A prototype CSSPAA with 48 elements is designed as an example, and the height of the CSSPAA is 43% lower than that of the SPAA with the similar performance in the hemispherical beam coverage. Both numerical and experimental results indicate the effectiveness of the developed method.
telecommunications,engineering, electrical & electronic
What problem does this paper attempt to address?
### Problems Addressed by the Paper The paper primarily addresses the issue of high profile in traditional Spherical Conformal Phased Array Antennas (SPAA). Specifically: 1. **Problems with Traditional SPAA**: - Although traditional SPAA has a wide beam coverage, its spherical carrier leads to a high profile. - High profile is a challenge for mobile carriers as it limits installation space and affects the aerodynamic performance of the antenna. 2. **Proposed New Method**: - A new method is proposed to reduce the height of SPAA by removing a concave sector from the SPAA and placing antenna elements inside it, forming a low-profile Concave Sector Cut Spherical Phased Array Antenna (CSSPAA). - Distributed aperture synthesis technology is used to ensure that CSSPAA's performance is close to that of traditional SPAA while minimizing height. - The height of CSSPAA and the half-power beamwidth (HPBW) of the antenna elements are designed to minimize the occlusion effects caused by the special topology. 3. **Experimental Verification**: - A prototype of CSSPAA containing 48 antenna elements was designed as an example. - Experimental results show that the height of CSSPAA is reduced by 43% compared to traditional SPAA, while maintaining similar performance within the hemispherical beam coverage.