Abstract:Preliminary demonstrations show Fiber Bragg Grating (FBG) sensors effectively measure low temperatures, such as in Helium cryostats. These sensors, resistant to electromagnetic interference, offer significant potential for monitoring strain and temperature within superconducting coils and cryogenic structures due to their compact size. Standard FBG sensors are constrained by the thermal expansion coefficient of the polyimide coating, restricting their use as embedded sensors during the heating process of Nb 3 Sn superconducting coils. These sensors are currently unable to endure temperatures exceeding 400 degrees C, essential for fabricating Nb 3 Sn coils through the wind and react technique. This study explores enhancing the endurance of FBG sensors through magnetron sputtering coating process with copper (thickness of 20 mu m), which has a thermal expansion coefficient similar to Nb 3 Sn coils. The results showed improved repeatability and survival for the copper -coated FBG in comparison to the standard polyimide-coated FBG from room temperature up to 939 K. Subsequently, the strain and temperature sensing capabilities of the FBG sensors with copper coating are evaluated using a separately developed controllable conduction cooling system, ranging from room temperature to 4.2 K. The findings in this paper demonstrate that the copper coating significantly enhances the durability of the FBG sensors under high temperatures. Additionally, the strain and temperature sensing characteristics of the sensors remain effective across a broad range from cryogenic to elevated temperatures. The homemade FBGs were independent of temperature below 30 K and responsible for the larger internal thermal strain of Nb 3 Sn magnets during its preheat treatment and operation.

Enhanced Strain and Temperature Sensing in Copper-Coated Fiber Bragg Grating Sensors Across a Wide Temperature Range from Cryogenic to Elevated Levels

Experimental Measurements of the Sensitivity of Fiber-Optic Bragg Grating Sensors with A Soft Polymeric Coating under Mechanical Loading, Thermal and Magnetic under Cryogenic Conditions

Multilayer Metal-Coated Fiber Bragg Grating for High-Temperature Sensing

Temperature Characteristics of FBG Sensors with Different Coatings for High Temperature Superconductor Application

Development of Highly-Sensitive and Reliable Fiber Bragg Grating Temperature Sensors With Gradient Metallic Coatings for Cryogenic Temperature Applications

Temperature Sensing of Metal-Coated Fiber Bragg Grating

Temperature Sensing Characteristics of Metal Coated FBG During Dynamic Cooling Process

A Study of Tensile and Fatigue Loading Effects on the Performance of Metal-Packaged FBG Strain Sensor Developed for Cryogenic Applications

Selecting of FBG Coatings for Quench Detection in HTS Coils

Highly Sensitive Ni-Cu Duplex Metal Coated Fiber Bragg Grating Temperature Sensor

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Simultaneous Strain And Cryogenic Temperature Measurement By Using An Improved Efpi/Fbg Fiber Sensor

Temperature and Strain Sensing Properties of the Zinc Coated FBG

Heat Treatment on Fiber Bragg Grating with Ni Coating for Elevated Temperature Sensor

Highly-sensitive Fiber Bragg Grating Temperature Sensors with Metallic Coatings

Preliminary Strain Measurement in High Field Superconducting Magnets With Fiber Bragg Grating

Strain Sensing Performance of Material Packaged Fiber Bragg Grating in Wide Temperature Range

Temperature Sensing Experiment of Fiber Bragg Grating Packaged by Copper Capillary Without Strain

Optimized Cryogenic FBG Sensitivity Coefficient Calibration for High-Precision Thermal Expansion Measurements

Enhanced Cryogenic Measurement: Rayleigh-scattering Measurements with Dual Optical Fibers for Precise Decoupling of Temperature and Strain