Abstract:Steel-basalt hybrid fibers reinforced cementitious composite (SBFRCC) is a potential reinforce-ment and repair material for engineering structures with fire risk due to its excellent mechanical properties exposed to ambient and high temperatures. However, the bonding properties between SBFRCC and existing concrete are still unclear, especially at high temperatures. To fill this gap, the bonding properties between SBFRCC and existing concrete at high temperatures were investigated based on two situations by using the slant shear and splitting tensile tests. First, the existing concrete was heated at high temperatures and then bonded with SBFRCC and strengthening concrete to form combined systems, respectively. The effects of the interface roughness, high temperature duration, and post-fire-curing on their bonding properties were investigated. Second, the existing concrete was bonded with SBFRCC and then heated at high temperatures, and the effects of fly ash substation rates on the bonding properties were studied. Besides, the backscattered-electron (BSE) was used to observe the interface between the exiting concrete and SBFRCC exposed to various temperatures. Results show that the first bonded and then heated specimens are slide-failed and separated at the bonding interface from room tem-perature to 600 degrees C, while the damage is generated within the existing concrete at 800 degrees C. SBFRCC has better high temperature resistance than the existing concrete. The slant shear and splitting tensile strengths between PC-A and SBFRCC are 9%-33.3% higher than that of PC-A and strengthening concrete at all temperatures. The appropriate roughness at the interface by pol-ishing can significantly improve the bonding properties between the existing concrete and SBFRCC. The bonding strength is recovered by more than 18.2% and 29.8% after the post-fire curing of 28 and 90 d, respectively. The increase of fly ash substitution rates has a certain contribution to the bonding properties above 600 degrees C.

Experimental Study on the Interfacial Bond Behavior Between Cfrp and Concrete Using the Hybrid Bonding Technique

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Experimental investigation and analytical prediction on bond behaviour of CFRP-to-concrete interface with FRP anchors

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Fracturing behaviors of FRP-strengthened concrete structures

Behavior of FRP-engineered cementitious composite layer and concrete interface with FRP anchors

Flexural performance of RC beams using hybrid anchored CFRP sheets with bond defects

Experimental investigation on shear performance of RC T-beams strengthened with hybrid bonded CFRP strips

Bond Behavior of FRP-concrete Wet-Bonding Interface under Lateral Confinement

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Investigation of Bond in Concrete Structures Strengthened with Near Surface Mounted Carbon Fiber Reinforced Polymer Strips

Experimental and theoretical study on bond behavior of helically wound FRP bars with different rib geometry embedded in ultra-high-performance concrete

Experimental Investigations on Bond Behavior between FRP Bars and Advanced Sustainable Concrete

Numerical Analyses of Hybrid-Bonded Frp Strengthened Concrete Beams

Experimental Study on Bond Behavior Between CFRP and Concrete with Longitudinal Grooves

Experimental study on the fatigue bond behavior of concrete beams reinforced with hybrid fiber‐reinforced polymer and steel bars

Analytical Model for Bond Behavior Prediction of CFRP-Concrete Joints with End Anchorage

FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure

Experimental and theoretical studies on bond behavior between concrete and FRP bars with different surface conditions