Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

An Improved Parallel Random Sequential Addition Algorithm in RMC Code for Dispersion Fuel Analysis

An Improved Algorithm for Drift Diffusion Transport and Its Application on Large Scale Parallel Simulation of Resistive Random Access Memory Arrays

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Development of Random Geometry Capability in Rmc Code for Stochastic Media Analysis

Research on the ODR-VS Method Applicable to Various Geometric Models

Optimized Dropping and Rolling and Virtual Surface Method for High Packing Fraction of Dispersed Fuel Particles in Annular Container

AN IMPROVED DISTINCT ELEMENT METHOD FOR HIGH PACKING FRACTION STOCHASTIC MEDIA MODELING

Depletion Benchmarks Calculation of Random Media Using Explicit Modeling Approach of RMC

Gpu-Based Parallel Calculation Method For (1)Molecular Weight Distribution Of Batch Free Radical Polymerization

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

A Sequential Variable Decoupling Method For Rigorous Calculation Of Molecular Weight Distribution Of Batch Free Radical Polymerization

Development of CAD geometry converting and correction method in Monte Carlo code RMC

Adaptable Parallel Acceleration Strategy For Dynamic Monte Carlo Simulations Of Polymerization With Microscopic Resolution

Random Geometry Capability in RMC Code for Explicit Analysis of Polytype Particle/pebble and Applications to HTR-10 Benchmark

Parallel calculation methods for molecular weight distribution of batch free radical polymerization

Chord Length Sampling Correction Analysis for Dispersion Fuel in Monte Carlo Simulation

Docker-Enabled Scalable Parallel MLFMA System for RCS Evaluation

Polynomial interpolation cross-section parameterization method with the RMC Monte Carlo code

ICONE23-1418 DEVELOPMENT AND VALIDATION OF THE FAST DOPPLER BROADENING MODULE COUPLED WITHIN RMC CODE

Optimizing the RMC Code Using the Decay Chain Method for Large-Scale Decay Calculations

New Strategies of Sensitivity Analysis Capabilities in Continuous-Energy Monte Carlo Code RMC