Abstract:Nowadays, there are more and more interests in the use of Monte Carlo codes to calculate the detailed power density distributions in full-core reactors. With the Inspur TS1000 HPC Server of Tsinghua University, several calculations have been done based on the EDF 3D Neutron Transport PWR Full-core benchmark through large-scale parallelism. To investigate and compare the results of the deterministic method and Monte Carlo method, EDF R&D and Department of Engineering Physics of Tsinghua University are having a collaboration to make code to code verification. So in this paper, two codes are used. One is the code COCAGNE developed by the EDF R&D, a deterministic core code, and the other is the Monte Carlo code RMC developed by Department of Engineering Physics in Tsinghua University. First, the full-core model is described and a 26-group calculation was performed by these two codes using the same 26-group cross-section library provided by EDF R&D. Then the parallel and tally performance of RMC is discussed. RMC employs a novel algorithm which can cut down most of the communications. It can be seen clearly that the speedup ratio almost linearly increases with the nodes. Furthermore the cell-mapping method applied by RMC consumes little time to tally even millions of cells. The results of the codes COCAGNE and RMC are compared in three ways. The results of these two codes agree well with each other. It can be concluded that both COCAGNE and RMC are able to provide 3D-transport solutions associated with detailed power density distributions calculation in PWR full-core reactors. Finally, to investigate how many histories are needed to obtain a given standard deviation for a full 3D solution, the non-symmetrized condensed 2-group fluxes of RMC are discussed.

Polynomial interpolation cross-section parameterization method with the RMC Monte Carlo code

ICONE19-43235 Development of a Monte Carlo Multi-group Constants Generation Code

RMC - A Monte Carlo code for reactor physics analysis

RMC – A Monte Carlo Code for Reactor Core Analysis

3D Neutron Transport PWR Full-core Calculation with RMC Code

Generating multi-group cross-sections using continuous-energy Monte Carlo method for fast reactor analysis

Research on the On-the-fly Homogenization Method Based on RMC Code for Criticality Calculations

Improving Tally Efficiency and Accuracy of Multi-Group Scattering Matrix Calculations in the Monte Carlo Code NECP-MCX

Research on Coupling Scheme of Monte Carlo Burnup Calculation in RMC

Kinetic Methods in Monte Carlo Code RMC and Its Implementation to C5G7-TD Benchmark

Preliminary Verification of Multi-Group Cross-Sections Generation and Locally Heterogeneous Transport Calculation Using OpenMC with CEFR Start-Up Tests Benchmark

Rasterized Coarse Mesh Finite Difference Acceleration on Method of Characteristics for a Reactor Core with a Generalized Boundary

A hybrid Monte Carlo and response matrix Monte Carlo method in criticality calculation

Homogenized Cross-Section Generation for Pebble-Bed Type High-Temperature Gas-Cooled Reactor Using NECP-MCX

Random Geometry Capability in RMC Code for Explicit Analysis of Polytype Particle/pebble and Applications to HTR-10 Benchmark

Continuous energy Monte Carlo method based homogenization multi-group constants calculation

BEAVRS Full Core Burnup Calculation in Hot Full Power Condition by RMC Code

RMC Capability of Multi-cycle HFP Full Core Burnup Simulation

On-the-fly interpolation of continuous temperature-dependent thermal neutron scattering data in rmc code

Group Constants Generation Based on NECP-MCX Monte Carlo Code

Rmc1.0-Development Of Monte Carlo Code For Reactor Analysis