Abstract:Low-frequency noise has always been a thorny problem in the field of noise control. In recent years, the development of sound-absorbing metastructures has provided new ideas for low-frequency noise control. In this paper, we propose low-frequency sound-absorbing metastructures constructed by Helmholtz resonators with embedded slit. Analytical and numerical models were established to analyze the sound absorption performance and mechanism of the proposed sound-absorbing metastructure, and optimization design was conducted to achieve low-frequency wideband absorption performance. The analytical modeling method and the performance of the proposed sound-absorbing metastructure were also experimentally verified. The main conclusions are summarized as follows: 1) Based on the use of transfer matrix method and finite element method, analytical and numerical models for calculation of sound absorption coefficient were established. It was shown that analytical predictions are in good agreement with numerical calculations. It was demonstrated that a typical design of a single-cell metastructure with 30mm thickness can achieve a sound absorption coefficient of 0.88 at 404 Hz. Typical designs of two-cell and the four-cell parallel structures (with 50 mm thickness) can achieve two and four near-perfect low-frequency sound absorption peaks within the frequency band of 200-400 Hz, respectively. 2) The low-frequency sound absorption mechanisms of the proposed metastructure were explained from four aspects: simplified equivalent model parameters, normalized acoustic impedance, complex-plane zero/pole distribution, sound pressure cloud image and particle velocity field distribution. It was demonstrated that the main sound absorption mechanism is associated with the thermal viscous loss of sound waves caused the inner wall of embedded slit. 3) Optimization design for broadband low-frequency absorption performance was carried out by using differential evolution optimization algorithm. A parallel-multi-cell coupled metastructure with multiple perfect sound absorption peaks below 500Hz was optimized. Under the condition of thickness 90mm, the sound absorption coefficient curve of an optimized metastructure exhibited 8 near-perfect sound absorption peaks and an average sound absorption coefficient of 0.86 within the frequency range of 170-380 Hz. 4) Experimental samples were fabricated to carry out sound absorption tests. Experimental results were basically consistent with the analytical predictions. Mutual verification of analytical model, numerical calculation and experimental measurements was completed. To sum up, the sound-absorbing metastructures proposed in this paper have outstanding sound absorption performance at low frequencies with sub-wavelength thickness. We demonstrated they are suitable for low frequency broadband sound absorption below 500 Hz. Thanks to their thin thickness and relatively simple construction, they have broad application prospects in practical noise control engineering.

Broadband Low-Frequency Sound Absorption Via Helmholtz Resonators with Porous Material Lining

A compact acoustic metamaterial based on Helmholtz resonators with side slits for low-frequency sound absorption

A thin multi-order Helmholtz metamaterial with perfect broadband acoustic absorption

Development of a low-frequency broadband sound absorber based on a micro-perforated panel coupled with the Helmholtz resonator system

Rectangular extended neck Helmholtz resonant acoustic structure for low frequency broadband sound absorption

Low-frequency broadband acoustic metamaterial absorber based on nested resonator and synergistic coupled weak resonances

Low-frequency sound-absorbing metasurface constructed by a membrane-covered and coiled Helmholtz resonator

Acoustic multi-layer Helmholtz resonance metamaterials with multiple adjustable absorption peaks

An extra-broadband compact sound-absorbing structure composing of double-layer resonator with multiple perforations.

Rearranging the Iteration Space to Eliminate the True Sharing Thrashing in Parallel Processinng Systems

Effects of Aperture Shape on Absorption Property of Acoustic Metamaterial of Parallel-Connection Helmholtz Resonator

Hybrid porous Helmholtz resonator for low-frequency broadband absorption

Ultra-broadband acoustic absorption with inhomogeneous high-order Fabry–Pérot resonances

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

A Low-Frequency Wideband Ventilation Muffler Based on an Embedded Rough-Necked Helmholtz Resonator

Broadband quasi-perfect sound absorption by a metasurface with coupled resonators at both low- and high-amplitude excitations

Research on the Low-Frequency Sound Absorption Characteristics of Coiled Helmholtz Cavity Acoustic Metamaterials

Highly Efficient Low‐Frequency Broadband Sound Absorption with a Composite Hybrid Metasurface

Tunable underwater acoustic metamaterials via quasi-Helmholtz resonance: From low-frequency to ultra-broadband

Mechanism analysis and optimal design of sound-absorbing metastructure constructed by slit-embedded Helmholtz resonators

Low-Frequency Sound-Insulation Performance of Labyrinth-Type Helmholtz and Thin-Film Compound Acoustic Metamaterial