Abstract:Among fuel cells, the direct methanol fuel cell (DMFC) has attracted great attention and has been considered a very promising power source because of the ease of methanol transportation and its high energy density. A major limiting factor hindering DMFC’s commercial application is the poor catalytic performance in the anode (methanol oxidation reaction). The methanol oxidation reaction (MOR) requires (OH-) from water dissociation as an oxygen donor for the reaction; however, the slow water dissociation on Pt limits the rate of MOR. In addition to the sluggish catalytic activity, the other major impediment for Pt catalysts is the generation of carbon monoxide (CO) during the MOR process.In order to improve the catalytic performance of MOR catalysts, a variety of catalyst design strategies have been devised. The interesting way of carrying out the MOR catalytic process is the non-CO pathway which takes place on Pt-Au bimetallic catalysts, thus eliminating CO poisoning. However, the overall activity of Pt-Au alloys in MOR is relatively low, which ultimately limits the application of Pt-Au catalysts. In this study, a nanoporous (np) Au-Cu-Pt thin-film catalyst with a fine structure and tunable composition is synthesized by using a facile method involving successive electrodeposition and de-alloying. SEM, SEM-EDX and ICP have been used for morphology characterization and composition assessment. Pb under-potential deposition (UPD), H UPD and CO stripping tests have been employed to determine the electrochemical active surface area (ECSA) and to probe the Pt active sites specifically. Also, cyclic voltammetry (CV) tests have been performed to assess the catalytic performance in MOR. Finally, long-term CV and chronoamperometry (constant potential) tests have been used to study and evaluate the durability of accordingly synthesized catalyst for MOR. The prepared np Au-Cu-(8% in the precursor alloy)Pt catalyst exhibits outstanding mass and specific activity toward the MOR, which is approximately six- and nine-times higher than the activity of a commercial Pt/C(40%) counterpart, respectively. A negative 75 mV onset potential shift upon the MOR anodic scan on the np Au-Cu-(8 %)Pt catalyst in comparison with Pt/C(40%) corroborates its higher catalytic activity. Furthermore, the alloy catalyst demonstrates better durability than the Pt/C(40%) counterpart in a three-hour constant potential test and exhibits full post-factum recovery of its cycling activity. In addition, it retains more than 60% of its original activity after 3000 cycles of an accelerated degradation test. Reference: Xie, Y., Li, C., Razek, S.A., Fang, J. and Dimitrov, N., 2020. Synthesis of Nanoporous Au− Cu− Pt Alloy as a Superior Catalyst for the Methanol Oxidation Reaction. ChemElectroChem, 7(2), pp.569-580.

Pt Loaded on 3d Micro-Flower-Shaped Nife Layered Double Hydroxides As a Highly Active and Durable Methanol Oxidation Electrocatalyst

Palladium supported on NiFe layered double hydroxide as an effective electrocatalyst for methanol electro-oxidation

Pt-Decorate MOFs Derived Ni-N-C Materials as an Efficient Electrocatalyst for Methanol Oxidation

Porous layered cobalt nanocrystal/nitrogen-doped carbon composites as efficient and CO-resistant electrocatalysts for methanol oxidation reaction

Strengthening the Activity and CO Tolerance with Bi-Component PtNi/NbN-C Catalyst for Methanol Alkaline Electrooxidation

Highly Dispersed Pd-CeO2 Nanoparticles Supported on N-Doped Core–Shell Structured Mesoporous Carbon for Methanol Oxidation in Alkaline Media

Pt Nanoparticles Loaded on W18O49 Nanocables–rGO Nanocomposite As a Highly Active and Durable Catalyst for Methanol Electro-Oxidation

MnO-Co@Pt nanowires encapsulated in N-doped porous carbon derived from MOFs for efficient electrocatalytic methanol oxidation reaction

Mixed‐Dimensional Partial Dealloyed PtCuBi/C as High‐Performance Electrocatalysts for Methanol Oxidation with Enhanced CO Tolerance

Fine-Tuning the Electronic Structure of Dealloyed PtCu Nanowires for Efficient Methanol Oxidation Reaction

PEDOT-embellished Ti 3 C 2 Tx nanosheet supported Pt–Pd bimetallic nanoparticles as efficient and stable methanol oxidation electrocatalysts

Alloyed Pt–Ru Nanoparticles Immobilized on Mesostructured Nitrogen-Doped Carbon Nanocages for Efficient Methanol Electrooxidation

Synergistic effects of platinum–cerium carbonate hydroxides–reduced graphene oxide on enhanced durability for methanol electro-oxidation

Pt3Sn0.5Mn0.5 Intermetallic Electrocatalyst with Superior Stability for CO-Resilient Methanol Oxidation

Pt3Cu alloy anchored on nanoporous WO3 with high activity and stability in methanol oxidation

Constructing a CrCoNi medium entropy alloy coordinated Pt ultrathin film as durable electrocatalysts for methanol oxidation reaction

High-efficiency Methanol Oxidation Electrocatalysts Realized by Ultrathin PtRuM-O (M = Ni, Fe, Co) Nanosheets

Nanoporous Au-Cu-Pt As a Superior Electro-Catalyst for the Methanol Oxidation Reaction

Core–Shell Structured PtRuCo x Nanoparticles on Carbon Nanotubes as Highly Active and Durable Electrocatalysts for Direct Methanol Fuel Cells

A NixCu100-x/NiOOH synergetic Pd complex for durable methanol oxidation electrocatalysis

Platinum supported on hydroxyl-grafted poly (3,4-ethylenedioxythiophene)-modified RuCo, N-tridoped bamboo-like carbon nanotubes for direct methanol fuel cell