Abstract:Among fuel cells, the direct methanol fuel cell (DMFC) has attracted great attention and has been considered a very promising power source because of the ease of methanol transportation and its high energy density. A major limiting factor hindering DMFC’s commercial application is the poor catalytic performance in the anode (methanol oxidation reaction). The methanol oxidation reaction (MOR) requires (OH-) from water dissociation as an oxygen donor for the reaction; however, the slow water dissociation on Pt limits the rate of MOR. In addition to the sluggish catalytic activity, the other major impediment for Pt catalysts is the generation of carbon monoxide (CO) during the MOR process.In order to improve the catalytic performance of MOR catalysts, a variety of catalyst design strategies have been devised. The interesting way of carrying out the MOR catalytic process is the non-CO pathway which takes place on Pt-Au bimetallic catalysts, thus eliminating CO poisoning. However, the overall activity of Pt-Au alloys in MOR is relatively low, which ultimately limits the application of Pt-Au catalysts. In this study, a nanoporous (np) Au-Cu-Pt thin-film catalyst with a fine structure and tunable composition is synthesized by using a facile method involving successive electrodeposition and de-alloying. SEM, SEM-EDX and ICP have been used for morphology characterization and composition assessment. Pb under-potential deposition (UPD), H UPD and CO stripping tests have been employed to determine the electrochemical active surface area (ECSA) and to probe the Pt active sites specifically. Also, cyclic voltammetry (CV) tests have been performed to assess the catalytic performance in MOR. Finally, long-term CV and chronoamperometry (constant potential) tests have been used to study and evaluate the durability of accordingly synthesized catalyst for MOR. The prepared np Au-Cu-(8% in the precursor alloy)Pt catalyst exhibits outstanding mass and specific activity toward the MOR, which is approximately six- and nine-times higher than the activity of a commercial Pt/C(40%) counterpart, respectively. A negative 75 mV onset potential shift upon the MOR anodic scan on the np Au-Cu-(8 %)Pt catalyst in comparison with Pt/C(40%) corroborates its higher catalytic activity. Furthermore, the alloy catalyst demonstrates better durability than the Pt/C(40%) counterpart in a three-hour constant potential test and exhibits full post-factum recovery of its cycling activity. In addition, it retains more than 60% of its original activity after 3000 cycles of an accelerated degradation test. Reference: Xie, Y., Li, C., Razek, S.A., Fang, J. and Dimitrov, N., 2020. Synthesis of Nanoporous Au− Cu− Pt Alloy as a Superior Catalyst for the Methanol Oxidation Reaction. ChemElectroChem, 7(2), pp.569-580.

Pt Nanoparticles Loaded on W18O49 Nanocables–rGO Nanocomposite As a Highly Active and Durable Catalyst for Methanol Electro-Oxidation

Highly active and durable methanol oxidation electrocatalyst based on the synergy of platinum–nickel hydroxide–graphene

Highly active Pt–Ru nanowire network catalysts for the methanol oxidation reaction

Pt Nanoparticles Dispersed on Ni/C Nanoflowers As Stable Electrocatalysts for Methanol Oxidation and Oxygen Reduction

Multi-dimensional Pt/Ni(OH)2/nitrogen-doped Graphene Nanocomposites with Low Platinum Content for Methanol Oxidation Reaction with Highly Catalytic Performance

Ultrasmall Molybdenum Carbide Nanocrystals Coupled with Reduced Graphene Oxide Supported Pt Nanoparticles As Enhanced Synergistic Catalyst for Methanol Oxidation Reaction

Synergistic effects of platinum–cerium carbonate hydroxides–reduced graphene oxide on enhanced durability for methanol electro-oxidation

MnO-Co@Pt nanowires encapsulated in N-doped porous carbon derived from MOFs for efficient electrocatalytic methanol oxidation reaction

Pt Nanowires on Monolayered Graphene Oxide for Electrocatalytic Oxidation of Methanol

Enhanced Methanol Electrooxidation by Electroactivated Pd/Ni(OH)2/N-rGO Catalyst

Facile Synthesis of PtP2 Nanocrystals As Highly Active Electrocatalysts for Methanol Oxidation.

Nanoporous Au-Cu-Pt As a Superior Electro-Catalyst for the Methanol Oxidation Reaction

Pt Loaded on 3d Micro-Flower-Shaped Nife Layered Double Hydroxides As a Highly Active and Durable Methanol Oxidation Electrocatalyst

Platinum-palladium-on-reduced Graphene Oxide As Bifunctional Electrocatalysts for Highly Active and Stable Hydrogen Evolution and Methanol Oxidation Reaction.

Alloyed Pt–Ru Nanoparticles Immobilized on Mesostructured Nitrogen-Doped Carbon Nanocages for Efficient Methanol Electrooxidation

A highly active, stable and synergistic Pt nanoparticles/Mo 2 C nanotube catalyst for methanol electro-oxidation

Highly Graphitized Carbon-Wrapped PtFeCo Alloy with Enhanced Durability and Activity Toward Methanol Electro-Oxidation

Highly Active and Durable Pt72ru28 Porous Nanoalloy Assembled with Sub-4.0 Nm Particles for Methanol Oxidation

Platinum–Ruthenium Nanotubes and Platinum–Ruthenium Coated Copper Nanowires As Efficient Catalysts for Electro-Oxidation of Methanol

Recent Progress on Reduced Graphene Oxide Supported Pt-based Catalysts and Electrocatalytic Oxidation Performance of Methanol

High-efficiency Encapsulation of Pt Nanoparticles into the Channel of Carbon Nanotubes As an Enhanced Electrocatalyst for Methanol Oxidation.