Abstract:Many strategies have been proposed for carbon dioxide (CO2) reduction aiming to close the carbon cycle and compensate anthropogenic CO2 emissions. Electrochemical CO2 reduction has several advantages that it can be carried out under ambient conditions with water as the only additional feedstock, and electricity generated from renewable sources can be employed to achieve a fully sustainable route [1]. Copper (Cu) has unique features for electrochemically converting CO2 to a range of chemicals including hydrocarbons [2], but its selectivity for specific products is low. Especially, at a low or intermediate overpotential, the hydrogen evolution reaction (HER) dominates the overall process on polycrystalline Cu in aqueous solutions [3]. However, the selectivity of Cu can be tuned by introducing a secondary metal. Tin-modified nanostructured Cu (CuSn) electrocatalysts have been developed for electrochemically converting CO2 to carbon monoxide (CO). The doped Sn atoms in the topmost layer alloy with Cu, form a CuSn shell, and efficiently suppress the HER. By optimizing the Sn content in the CuSn layer and the nanostructure, the faradaic efficiency for CO reaches > 90 % at -0.7 V vs. RHE, and remains above 85 % in a wide potential range from -0.7 to -1.0 V [4]. However, the excellent selectivity for CO can be only observed at CuSn dendrites. When the CuSn catalyst has a particulate morphology, the selectivity for CO becomes much worse, even though the surface composition has the optimal Cu/Sn ratio. The CuSn particles are active for the HER at a low overpotential. Although the HER can be efficiently suppressed to a faradaic efficiency of less than 15 % at a high overpotential, the major products for CO2 reduction are both CO and formate (COOH-) [5]. This work highlights the importance of nanostructure and surface composition of CuSn catalysts for active and selective CO2 reduction. Electrodes consisting of a three-dimensional porous architecture are prepared for a large active surface per unit geometric area. The CO production achieves a high partial current density of 4.9 mA·cm-2 at -0.8 V [4]. [1] Centi, G., et al. Energy Environ. Sci. 2013, 6, 1711-1731 [2] Qiao, J., et al., Chem. Soc. Rev. 2014, 43, 631-675 [3] Li, C., et al., J. Am. Chem. Soc. 2012, 134, 7231-4 [4] Zeng, J., et al., submitted [5] Ju, W., et al., in preparation

Structure Regulated CuSn Alloy Catalyst for Selective Electrochemical CO2-to-formate Conversion at Higher Current Densities

Facile synthesis of porous Cu-Sn alloy electrode with prior selectivity of formate in a wide potential range for CO<sub>2</sub> electrochemical reduction

Facile synthesis of porous Cu-Sn alloy electrode with prior selectivity of formate in a wide potential range for CO2 electrochemical reduction

Sn-Doped Bi2O3 Nanosheets for Highly Efficient Electrochemical CO2 Reduction Toward Formate Production.

Sn-Decorated Cu for Selective Electrochemical CO2 to CO Conversion: Precision Architecture Beyond Composition Design

Synergy Effects on Sn-Cu Alloy Catalyst for Efficient CO2 Electroreduction to Formate with High Mass Activity

Electrodeposited Sn-Cu@Sn dendrites for selective electrochemical CO2 reduction to formic acid.

Tunable Selectivity for Electrochemical CO2 Reduction by Bimetallic Cu–Sn Catalysts: Elucidating the Roles of Cu and Sn

Electron fixation of Sn2+/Cu+ bimetallic catalyst on flexible carbon fiber cloth for highly converting gaseous CO2 to formate at moderate potential

Tunable Selectivity for Electrochemical CO 2 Reduction by Bimetallic Cu–Sn Catalysts: Elucidating the Roles of Cu and Sn

Derived CuSn Alloys from Heterointerfaces in Bimetallic Oxides Promote the CO2 Electroreduction to Formate

Coupling CO2 reduction with CH3OH oxidation for efficient electrosynthesis of formate on hierarchical bifunctional CuSn alloy

Dynamic Restructuring of Cu‐Doped SnS2 Nanoflowers for Highly Selective Electrochemical CO2 Reduction to Formate

Enabling Durable Selectivity of CO2 Electroreduction to Formate Achieved by a Multi-Layer SnOx Structure

Zn-Induced Electron-Rich Sn Catalysts Enable Highly Efficient CO2 Electroreduction to Formate

Tuning Sn3O4 for CO2 Reduction to Formate with Ultra-High Current Density

Nanostructured Cu-Sn Alloy for Actively and Selectively Converting CO2 to CO

Sn/SnOx Electrode Catalyst with Mesoporous Structure for Efficient Electroreduction of CO2 to Formate

Sharp Cu@Sn Nanocones on Cu Foam for Highly Selective and Efficient Electrochemical Reduction of CO2 to Formate

Laser-fabricated channeled Cu6Sn5/Sn as electrocatalyst and gas diffusion electrode for efficient CO2 electroreduction to formate

In Situ Dynamic Construction of a Copper Tin Sulfide Catalyst for High-Performance Electrochemical CO2 Conversion to Formate