Abstract:While electrochemically driven, pH control-enabled, dual electrode sensing under quiescent conditions is emerging as a viable electroanalytical method, application of this approach under hydrodynamic conditions is less well documented. In this work we report the development of a finite element model (COMSOL Multiphysics™) to simulate electrochemical pH control under both quiescent and hydrodynamic conditions. We used these simulations to elucidate the effect of flowrate on our pH control method. Adjustments to the applied currents were made so as to compensate for the removal of generated protons by hydrodynamic flow, thereby allowing effective pH control under different flow conditions. Once optimised, this approach was applied to the detection of hypochlorous acid under various flow rates. To this end, the sensitivity of the sensors benefitted from both the localized electrochemical pH control and the signal-boosting effect associated with hydrodynamic forces.

What problem does this paper attempt to address?

This paper aims to solve the problem of pH control through a two - electrode system under flow conditions. Specifically, the authors developed a finite - element model (using COMSOL Multiphysics™ software) to simulate the effect of electrochemical pH control under static and flow conditions. The main objective of the study was to explore the influence of flow rate on the pH control method and to achieve effective pH control under different flow - rate conditions by adjusting the applied current to compensate for the removal of generated protons caused by the flow. ### Background and Problem of the Paper With the rapid development of Internet of Things (IoT) technology, there is an increasing demand for more powerful and reliable sensors that can be integrated into IoT networks. Electrochemical sensors are an ideal choice for remote sensing applications because of their characteristics such as providing direct electrical signal readings, low power consumption, high sensitivity, ease of use, miniaturization, cost - effectiveness, and portability. Especially in water quality analysis, electrochemical sensors can provide a reliable and portable detection method, especially when adapted for chlorine measurement. However, currently this analysis is limited because it requires the addition of acids and/or buffers to protonate hypochlorite ions and convert them into a detectable form, which is a pH - dependent process. ### Solution To solve the above - mentioned problems, the authors proposed a new method using electrochemical pH control, that is, through a four - electrode electrochemical sensor system, which contains two interdigitated electrodes (IDE), one of which is used as a sensor and the other as a proton - generator electrode to control the pH value of the test solution near the sensor, thus eliminating the need for adding chemical reagents. Although this method performs well under static conditions, there are few reports on its application under flow conditions. ### Main Contributions 1. **Model Development**: Developed a finite - element model to simulate the effect of electrochemical pH control under static and flow conditions. 2. **Experimental Verification**: Verified the accuracy of the theoretical model through experiments and demonstrated a method to achieve effective pH control at different flow rates by adjusting the applied current. 3. **Application Example**: Applied the optimized pH control method to hypochlorous acid detection, and the results showed that the sensitivity of the sensor benefited from local electrochemical pH control and the signal enhancement effect under flow conditions. ### Conclusion This study not only provides theoretical and experimental bases for achieving effective pH control under flow conditions, but also shows its potential in practical applications, especially in the online detection of chlorine in water quality monitoring. The microfluidic components fabricated by 3D printing technology further improve the repeatability and sustainability of the system.

Solid state dual electrode electroanalysis under hydrodynamic conditions: Application to pH-controlled in-line sensing.

Online Ph Monitoring Based On A Wireless Electrodeless Quartz Crystal Microbalance With Dissipation

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

An Electrochemical Biosensor with Dual Signal Outputs: Toward Simultaneous Quantification of pH and O 2 in the Brain upon Ischemia and in a Tumor during Cancer Starvation Therapy.

An Electrochemical Biosensor with Dual Signal Outputs: Toward Simultaneous Quantification of Ph and O2 in the Brain Upon Ischemia and in a Tumor During Cancer Starvation Therapy

Mechanistic Insight into Electrode Processes by Operando Visualization of Interfacial pH Using Fluorescent Nanosensors

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

On-chip Electrochemical Detection of Dissolved Oxygen: Eliminating the Requirement for Permeable Selective Membrane

In Situ pH-Controlled Electrochemical Sensors for Glucose and pH Detection in Saliva

Multiphysics Modeling of Electrode Dissolution Under Hydrodynamic Conditions in Low Conductivity Water

Electroanalytical Strategies for Local pH Sensing at Solid-Liquid Interfaces and Biointerfaces

Development of SPEEK-Coated IrOx Sensor for High-Biomass Aquatic Ph Monitoring

Voltammetric ion selective electrode-based two-electrode ion sensing system for pH detection

Large scale micro-photometry for high resolution pH-characterization during electro-osmotic pumping and modular micro-swimming

Ionophore‐Based Biphasic Chemical Sensing in Droplet Microfluidics

Non-faradaic capacitive cation sensing under flow

Micro- and Nanofluidic pH Sensors Based on Electrodiffusioosmosis

Pressure-Controlled Nanopipette Sensing in the Asymmetric-Conductivity Configuration

Complementary Metal Oxide Semiconductor-Based Optical Detection System for Fluidic Cellular Medium pH Quantification

Novel Dual Pt-Pt/IrOx Ultramicroelectrode for Ph Imaging Using SECM in Both Potentiometric and Amperometric Modes

Controlling ionic current through a nanopore by tuning pH: a local equilibrium Monte Carlo study