Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Enhancing the Performance of Natural Fiber Hybrid Green Composites through Coupling Agent modification

Enhancing the performance of hybrid bio-composites reinforced with natural fibers by using coupling agents

Biocomposites of Poly(Lactic Acid) and Microcrystalline Cellulose: Influence of the Coupling Agent on Thermomechanical and Absorption Characteristics

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Sustainable jute fiber reinforced polylactic acid composite: Thermochemical and thermomechanical characteristics

Plant fiber-reinforced green composite: A review on surface modification, properties, fabrications and applications

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

Fabrication and characterization of sustainable composites from animal fibers reinforced unsaturated polyester resin

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Study on the modification of polyester resin bamboo fiber-based composite with euphorbia coagulum and their effect on mechanical and thermal properties

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Hybrid polymer composites of Terminalia chebula filler reinforced thermal and mechanical characterization of bagasse/tamarind seed

Enhancing the Mechanical Characteristics of Eco-Friendly Composite Materials: Taguchi and RSM Optimization

Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites

Enhancing mechanical properties of natural waste‐based composites for automobile and plastic industry

Experimental investigation of mechanical properties of jute/hemp fibers reinforced hybrid polyester composites

Cellulose Modification for Improved Compatibility with the Polymer Matrix: Mechanical Characterization of the Composite Material

Oil palm bio-fiber-reinforced polypropylene composites: effects of alkali fiber treatment and coupling agents

Thermomechanical Behavior of Methylene Diphenyl Diisocyanate-Bonded Flax/Glass Woven Fabric Reinforced Laminated Composites

Shaping sustainable pathways: Enhancing mechanical properties of biocomposite through tannic acid treatment of flax fabrics