Sustainable and Biodegradable Wood Sponge Piezoelectric Nanogenerator for Sensing and Energy Harvesting Applications
Jianguo Sun,Hengyu Guo,Javier Ribera,Changsheng Wu,Kunkun Tu,Marco Binelli,Guido Panzarasa,Francis W. M. R. Schwarze,Zhong Lin Wang,Ingo Burgert
DOI: https://doi.org/10.1021/acsnano.0c05493
IF: 17.1
2020-09-16
ACS Nano
Abstract:Developing low-cost and biodegradable piezoelectric nanogenerators is of great importance for a variety of applications, from harvesting low-grade mechanical energy to wearable sensors. Many of the most widely used piezoelectric materials, including lead zirconate titanate (PZT), suffer from serious drawbacks such as complicated synthesis, poor mechanical properties (e.g., brittleness), and toxic composition, limiting their development for biomedical applications and posing environmental problems for their disposal. Here, we report a low-cost, biodegradable, biocompatible, and highly compressible piezoelectric nanogenerator based on a wood sponge obtained with a simple delignification process. Thanks to the enhanced compressibility of the wood sponge, our wood nanogenerator (15 × 15 × 14 mm<sup>3</sup>, longitudinal × radial × tangential) can generate an output voltage of up to 0.69 V, 85 times higher than that generated by native (untreated) wood, and it shows stable performance under repeated cyclic compression (≥600 cycles). Our approach suggests the importance of increased compressibility of bulk materials for improving their piezoelectric output. We demonstrate the versatility of our nanogenerator by showing its application both as a wearable movement monitoring system (made with a single wood sponge) and as a large-scale prototype with increased output (made with 30 wood sponges) able to power simple electronic devices (a LED light, a LCD screen). Moreover, we demonstrate the biodegradability of our wood sponge piezoelectric nanogenerator by studying its decomposition with cellulose-degrading fungi. Our results showcase the potential application of a wood sponge as a sustainable energy source, as a wearable device for monitoring human motions, and its contribution to environmental sustainability by electronic waste reduction.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c05493?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c05493</a>.Figures S1–S9, SEM images of tangential-longitudinal section of wood sponge; SEM images of transverse sections of balsa wood samples before and after chemical delignification; SEM images of transverse sections of different wood species before and after chemical delignification; photographs of wood sponge showing its high and reversible compressibility; output voltage of single wood sponge subjected to 600 cyclic compression cycles; variation of output voltage and power density with resistance; output voltage of large-scale generator (30 wood sponges connected parallel to each other); wooden table for powering commercial LED in dark; and images showing wood sponges after treatment with cellulose-degrading fungus <i>Coniophora puteana</i> for different times (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c05493/suppl_file/nn0c05493_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology