Abstract:A strategy is developed to optimize the active layer vertical structure of sequential blade‐coating organic solar cells by changing the processing solvent of the upper layer, which provides a practical guidance to optimize the microstructure of active layer. Precise modulating the vertical structure of active layers to boost charge transfer is an effective way to achieve high power conversion efficiencies (PCEs) in organic solar cells (OSCs). Herein, efficient OSCs with a well‐controlled vertical structure are realized by a rapid film‐forming method combining low boiling point solvent and the sequential blade‐coating (SBC) technology. The results of grazing incident wide‐angle X‐ray scattering measurement show that the vertical component distribution is varied by changing the processing solvent. Novel characterization technique such as tilt resonant soft X‐ray scattering is used to test the vertical structure of the films, demonstrating the dichloromethane (DCM)‐processed film is truly planar heterojunction. The devices with chloroform (CF) processed upper layer show an increased mixed phase region compared to these devices with toluene (TL) or ‐DCM‐, which is beneficial for improving charge generation and achieving a superior PCE of 17.36%. Despite significant morphological varies, the DCM‐processed devices perform slightly lower PCE of 16.66%, which is the highest value in truly planar heterojunction devices, demonstrating higher morphological tolerance. This work proposes a solvent‐regulating method to optimize the vertical structure of active layers through SBC technology, and provides a practical guidance for the optimization of the active‐layer microstructure.

Organic Solar Cells: A Switchable Interconnecting Layer for High Performance Tandem Organic Solar Cell (adv. Energy Mater. 21/2017)

Organic Solar Cells: A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells (adv. Energy Mater. 17/2015)

An efficient solution‐processed interconnecting layer for large‐area tandem organic solar cells

A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells

Toward Efficient Tandem Organic Solar Cells: From Materials to Device Engineering

Organic tandem solar cells with Janus-engineered interconnecting layer

Efficient Organic Tandem Solar Cells Enabled by Solution‐Processed Interconnection Layer and Fine‐Tuned Active Layer

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Porous Organic Polymer Films with Tunable Work Functions and Selective Hole and Electron Flows for Energy Conversions

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Organic Interlayer Materials for Non-Fullerene Solar Cells

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub‐Cell

Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives

Tailoring the Nature of Interface States in Efficient and Stable Bilayer Organic Solar Cells by a Transfer‐Printing Technique

Phase Segregation and Voltage Loss Mitigated Highly Efficient Perovskite–Organic Tandem Solar Cells with a Simple Ambipolar SnOx Interconnecting Layer (adv. Funct. Mater. 52/2023)

Solar Cells: Thermionic Emission–Based Interconnecting Layer Featuring Solvent Resistance for Monolithic Tandem Solar Cells with Solution‐Processed Perovskites (Adv. Energy Mater. 36/2018)

Pairing 1D/2d-Conjugation Donors/acceptors Towards High-Performance Organic Solar Cells

A Mixed‐Pure Planar Heterojunction Structure of Active Layers for Efficient Sequential Blade‐Coating Organic Solar Cells

Finetuning Hole-Extracting Monolayers for Efficient Organic Solar Cells

Synchronous Doping Effects of Cathode Interlayers on Efficient Organic Solar Cells

Semitransparent Organic Solar Cells Enabled by a Sequentially Deposited Bilayer Structure