Abstract:A novel analysis technique of elements at ambient conditions has been developed. The technique is based on microwave-assisted laser-induced breakdown spectroscopy (MW-LIBS) applied to acoustically levitated samples. The technique has been demonstrated using three solid samples with different properties and compositions. These are ore containing multiple elements (OREAS 520), aluminium oxide (Al3O2) and gypsum (CaSO4·2H2O). The mass of samples was 21 mg, 23 mg, and 55 mg for gypsum, mineral ore, and Al3O2, respectively. Significant signal enhancements were recorded for a variety of elements, using microwave-assisted laser-induced breakdown spectroscopy and levitation (MW-LIBS-Levitation). The signal enhancement for Mn I (403.07 nm), Al I (396.13 nm) and Ca II (393.85 nm) was determined as 123, 46, and 63 times, respectively. Moreover, it was found that MW-LIBS-Levitation minimises the self-absorption of the Ca I (422.67 nm) and Na I (588.99 nm and 589.59 nm) spectral lines. In addition to the signal enhancements, the levitation process produces a spinning motion in the solids with an angular frequency of 7 Hz. This feature benefits laser-based analysis as a fresh sample is introduced at each laser pulse, eliminating the need for the usual mechanical devices. Based on the single-shot analysis, it was found that ∼80% of the laser pulses produced successful MW-LIBS-Levitation detection, confirming an impressive repeatability of the process. This contactless analytical technique can be applied in ambient pressure and temperature conditions with high sensitivity, which can benefit disciplines such as forensics science, isotope analysis, and medical analysis, where the sample availability is often diminutive.

Analysis of Solids with Different Matrices by Buffer-Gas-assisted Laser Ionization Orthogonal Time-of-flight Mass Spectrometry

High Irradiance Laser Ionization Orthogonal Time‐of‐flight Mass Spectrometry: A Versatile Tool for Solid Analysis

High Irradiance Laser Ionization Mass Spectrometry

Applicability of standardless semiquantitative analysis of solids by high-irradiance laser ionization orthogonal time-of-fight mass spectrometry.

Mass spectrometry of solid samples in open air using combined laser ionization and ambient metastable ionization

Influence of wavelength, irradiance, and the buffer gas pressure on high irradiance laser ablation and ionization source coupled with an orthogonal Time of Flight Mass Spectrometer

Semiquantitative Multielemental Analysis of Biological Samples by a Laser Ionization Orthogonal Time-of-flight Mass Spectrometer.

High Irradiance Laser Ionization Mass Spectrometry for Direct Speciation of Iron Oxides

A small high-irradiance laser ionization time-of-flight mass spectrometer.

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry Using Porous Silicon And Silica Gel As Matrix

Standardless Semi-quantitative Elemental Analysis of Steel Using Laser Ablation Time-of-flight Mass Spectrometry

Progress of laser ionization mass spectrometry for elemental analysis — A review of the past decade

Elemental analysis of levitated solid samples by microwave-assisted laser induced breakdown spectroscopy

Quantitative aluminum alloys analysis using laser-induced breakdown spectroscopy

Antireflection Surfaces for Biological Analysis Using Laser Desorption Ionization Mass Spectrometry.

A Data Selection Method for Matrix Effects and Uncertainty Reduction for Laser-Induced Breakdown Spectroscopy

Laser Ionization Time-of-flight Mass Spectrometry for Direct Elemental Analysis

Recent Advances in Nanostructure/nanomaterial-Assisted Laser Desorption/ionization Mass Spectrometry of Low Molecular Mass Compounds.

Simultaneous acquisition of elemental, fragmental, and molecular information on organometallic compounds.

Femtogram Detection and Quantitation of Residues Using Laser Ionization Orthogonal Time-Of-Flight Mass Spectrometry