Abstract:With the aim to enhance the phase shift range and bandwidth of the novel Inverted-E topology for single-bit and multi-bit phase shifters, this work proposes a new structure, wherein the Main Transmission Line (MTL) in the Inverted-E topology is replaced by a tunable transmission line with a fixed open circuited stub loaded at its center point. Therefore, offering four design freedoms, precisely the characteristic impedances and electrical lengths of the transmission line and the fixed open circuited stub, that provides it the flexibility to achieve much smaller susceptance values for large phase shifts up to 180°. The required susceptances are realized using three symmetric open or short-circuited stubs, which are loaded to the tunable transmission line using switching p-i-n diodes. The fixed open circuited stubs ensure excellent circuit matching to the port impedance of in the OFF-state, without the need of any additional matching network. Whereas, the enhanced design flexibility enables the realization of compact dimensions and lower insertion loss. A systematic design procedure is developed, supported by detailed design theory and mathematical formulations, followed by validation through analysis and simulations of typical 22.5°, 45°, 90° and 180° digital phase shifters. For experimental verifications, 90° and 180° designs are manufactured at center frequency of 2.4 GHz and a good agreement is observed with theory and simulations. The results indicate compact dimensions of and , corresponding insertion losses of 1.7 dB and 2.85 dB with phase error less than 1° at center frequency. Moreover, the phase variation is observed to be 2° and 5°, in bandwidths of 400 MHz and 100 MHz respectively.

Improvement in Anh-Plane Nonreciprocal Ferrite Phase Shifter Via Loading Dielectric Slabs

Planar Tunable High-Temperature Superconductor Microwave Broadband Phase Shifter with Patterned Ferroelectric Thin Film

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

An Improved Multilevel Green's Function Interpolation Method with Adaptive Phase Compensation

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

Single Field HIE FDTD Solver with Nonuniform Grid Stratagem for More Fine Structure

Distributed Ferroelectric Phase Shifter with Slots Periodically Inserted into Ground

Modeling of Electromagnetic Band Gap Structure Devices Tuned by Ferrite Cylinders

Analysis of a fast-acting waveguide ferrite phase shifter with longitudinal magnetization phasing structure

Liquid Crystal-Filled 60 GHz Coaxially Structured Phase Shifter Design and Simulation with Enhanced Figure of Merit by Novel Permittivity-Dependent Impedance Matching

A Miniaturized Phased Array Aperture Antenna Based on Bulk Ferroelectric Material

Phase Shading for Light Load Efficiency Improve in Three-Phase Resonant Converter with Integrated PCB Winding Magnetics

Design and Optimization of Diamond Mid-Infrared Phase Shifter

Compact and Low Loss Phase Shifter with Low Bias Field Using Partially Magnetized Ferrite

Inverted-E Type Phase Shifter Using Fixed Stub-Loaded Main Line: Enhanced Bandwidth and Phase Shift Range

Design and analysis of a bulk micromachined distributed digital microwave phase shifter on glass substrate

Novel Compact and Low-Loss Phase Shifters With Magnetodielectric Disturber

A New Broadband Differential Phase Shifter Fabricated Using a Novel CRLH Structure

Optimization of Ferrites Structure by Using a New Core-Less Design Algorithm for Electric Vehicle Wireless Power Transfer

A Bulk Micromachined Distrubuted Digital Phase Shifter for Microwave Phased Array Applications

Phase formation, microstructure and gyromagnetic properties of c-axis oriented M-type hexaferrite applied to self-biased circulator