Abstract:In-stu chemical analysis requires sampling and ionization/excitation of sample in an open environment. The atmospheric pressure micro-plasma system is in a simpler structure and more advantageous for miniaturization than laser cutting or laser induced breakdown. Therefore, in-stu chemical analysis technology based on atmospheric pressure micro-plasma has attracted widespread attention in the industry. The micro-plasma sources produced by different excitation supplies have different parameter characteristics and sampling characteristics. In order to determine the appropriate micro-plasma source for in-stu element detecting, it is necessary to further understand the sampling and characteristics of the micro-plasma under each discharge mode and operating parameters. This paper focuses on the optical emission spectra of direct current(DC) glow and pulsed arc plasmas acting on iron samples in ambient atmosphere. The on-line detection of high melting point metal samples in an open environment was realized, and we also found that the arc discharge micro-plasma combined with the spectral analysis source has higher sampling efficiency. The high sampling efficiency of the arc discharge microplasma source provides a new method for the detection of metals and difficult to dissociate samples. At the same time, complex sample preparation and sample transfer processes were avoided compared to conventional sampling devices. The experimental device adopts a typical needle-plate discharge structure, which has the advantages of low price, convenient operation and quick analysis. Arc discharge and glow discharge are realized by using a high voltage pulse power source and a DC power source respectively. The sampling results of the two ways indicate that at the input of similar discharge power, the optical emission spectrum of the sample iron stimulated by the arc discharge micro-plasma, sample element lines occupies dominant position in the spectrum, accompanied by the line of nitrogen in the air. And the relative intensity of the iron ion (Fe-II) line is higher than the relative intensity of the nitrogen molecule line. In the DC glow discharge, the relative intensity of the sample iron atom (Fe-I) line is very weak. This shows that the micro-plasma generated by the arc discharge has higher sampling efficiency. The sputtering crater left on the surface of the sample can draw the same conclusion. The glow discharge current was increased to 25 mA, the spectral line of the sample elemental iron was still not significantly enhanced. At the same time, the effect of sampling spacing on the two sampling modes was also studied. Experimental results show that the spacing has no significant effect on the both sampling spectra of the two modes. In this paper, the above mentioned comparative experiment was also carried out using the alloy aluminum foil whose main component is aluminum, and the same conclusion was obtained. It is concluded that the arc discharge micro-plasma is more suitable as a source of spectral analysis to achieve real-time rapid detection of metal samples.

Direct Current Arc Atomic Emission Detected by a Handheld Spectrometer Based on a Charge Coupled Device

Nonthermal Optical Emission Spectrometry: Direct Atomization and Excitation of Cadmium for Highly Sensitive Determination

Portable Dielectric Barrier Discharge-Atomic Emission Spectrometer.

Recent Progress at Atomic Spectrum Field for Dbd Research and Development

Emission Spectroscopic Diagnosis of 2-D Particle Distribution in Vacuum Arcs under Different Currents

Highly sensitive elemental analysis of Cd and Zn by solution anode glow discharge atomic emission spectrometry

Comparison of the Optical Emission Spectra of Iron Sample in Pulsed Arc and Glow Micro-Discharge under Ambient Atmosphere

Development of a miniaturized hydride generation-dielectric barrier discharge atomic absorption spectrometer

A miniature optical emission spectrometric system in a lab-on-valve for sensitive determination of cadmium.

Electrothermal Vaporization for Universal Liquid Sample Introduction to Dielectric Barrier Discharge Microplasma for Portable Atomic Emission Spectrometry

Determination of Metals in Environmental Waters by Solution Cathode Glow Discharge -Atomic Emission Spectroscopy (SCGD-AES) with a Syringe Pump for Sample Introduction

Flow injection hydride generation and on-line W-coil trapping for electrothermal vaporization dielectric barrier discharge atomic emission spectrometric determination of trace cadmium

Temporal Resolved Atomic Emission Spectroscopy on a Pulsed Electrolyte Cathode Discharge for Improving the Detection Sensitivity of Cu

Field instrumentation in atomic spectroscopy

Highly Sensitive Determination of Cadmium by Atomic Emission Spectrometry with Miniaturized Solution Anode Glow Discharge

Advances in Dielectric Barrier Discharge-Optical Emission Spectrometry for the Analysis of Trace Species

Chemical Vapor Generation by Reaction of Cadmium with Potassium Tetrahydroborate and Sodium Iodate in Acidic Aqueous Solution for Atomic Fluorescence Spectrometric Application

High Enhancement Factor in Low-Power Unipolar Discharge Arc Assisted Laser Induced Plasma Spectroscopy

Dielectric Barrier Discharge Carbon Atomic Emission Spectrometer: Universal GC Detector for Volatile Carbon-Containing Compounds.

An effective analytical system based on an ultraviolet atomizer for trace cadmium determination using atomic fluorescence spectrometry

Portable Atomic Absorption Spectrometer For Determination Of Copper, Chromium, Lead And Cadmium In Environmental Water